373Whp & 296Wtq @ 10psi??
#1
Guest
Posts: n/a
373Whp & 296Wtq @ 10psi??
Some of you may remember my old thread and know I wasn't holding boost at all, and thought it was the wastgate... well we switched out the 38mm for a 44mm and it did the trick
Here are just some <FONT SIZE="3"> EARLY </FONT> #'s for now, Will shoot for alot more after i udgrade my ignition/IM
<FONT COLOR="red">10psi on a pt61</FONT>
SET UP-
H22 Block:
-89mm with Golden Eagle Sleeves
-89mm Rollerwave pistons 9.5:1
-Manley/Full Race Rods
-ARP Head Studs
Turbo Setup:
-Precision SC61 T4 (PT61)
-SST
-3"DP
-Tial 44mm Wastegate
-Tial bov
Fuel and Ignition:
-Walbro 255 HP
-Hondata s200b
-Precision 1000cc injectors
Drivetrain:
-ACT 6puck with extreme PP
-ACT streetlight flywheel
Misc:
-Plx-m300
-autometer boost and oil pressure gauge
-bkr7e's
-ill think of some more later
Thanks to- Stone/Jarrett/Andy/B-***-VP
Sidenote- I forgot to bring my camera so couldn't get any footage of the dyno but ill get some clips for everyone this weekend
Modified by john d at 3:04 PM 2/14/2005
Here are just some <FONT SIZE="3"> EARLY </FONT> #'s for now, Will shoot for alot more after i udgrade my ignition/IM
<FONT COLOR="red">10psi on a pt61</FONT>
SET UP-
H22 Block:
-89mm with Golden Eagle Sleeves
-89mm Rollerwave pistons 9.5:1
-Manley/Full Race Rods
-ARP Head Studs
Turbo Setup:
-Precision SC61 T4 (PT61)
-SST
-3"DP
-Tial 44mm Wastegate
-Tial bov
Fuel and Ignition:
-Walbro 255 HP
-Hondata s200b
-Precision 1000cc injectors
Drivetrain:
-ACT 6puck with extreme PP
-ACT streetlight flywheel
Misc:
-Plx-m300
-autometer boost and oil pressure gauge
-bkr7e's
-ill think of some more later
Thanks to- Stone/Jarrett/Andy/B-***-VP
Sidenote- I forgot to bring my camera so couldn't get any footage of the dyno but ill get some clips for everyone this weekend
Modified by john d at 3:04 PM 2/14/2005
#5
Re: (PrettyLude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrettyLude »</TD></TR><TR><TD CLASS="quote">pretty good for 10 psi</TD></TR></TABLE>
pretty good!?
Glad to see the new 44mm w/g worked out. post some vids
pretty good!?
Glad to see the new 44mm w/g worked out. post some vids
Trending Topics
#12
Honda-Tech Member
Join Date: Jan 2005
Location: Holley 4053, carb 406 stroker anal Luber, Fag
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (Cjsls.com)
Where do people fit those intercoolers. Did you have to take out that front bar? Cause that's a big safety no no unless you want that engine in your lap.
Also nice numbers. Clean Red beautiful car. I love it.
Also nice numbers. Clean Red beautiful car. I love it.
#13
Re: Re: (V8MeatHead)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by V8MeatHead »</TD></TR><TR><TD CLASS="quote">Where do people fit those intercoolers. Did you have to take out that front bar? Cause that's a big safety no no unless you want that engine in your lap.
Also nice numbers. Clean Red beautiful car. I love it.</TD></TR></TABLE>
http://www.we-todd-did-racing....D.jpg
Also nice numbers. Clean Red beautiful car. I love it.</TD></TR></TABLE>
http://www.we-todd-did-racing....D.jpg
#14
Honda-Tech Member
Join Date: Jan 2005
Location: Holley 4053, carb 406 stroker anal Luber, Fag
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (DFW)
So the intercooler goes in the front of the car.
Maybe it's not on preludes but that big square bar, it's a support beam across the front, right about where you put that intercooler. Are you saying the new bumper allows the intercooler to fit?
Maybe it's not on preludes but that big square bar, it's a support beam across the front, right about where you put that intercooler. Are you saying the new bumper allows the intercooler to fit?
#15
Re: Re: (V8MeatHead)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by V8MeatHead »</TD></TR><TR><TD CLASS="quote">So the intercooler goes in the front of the car.
Maybe it's not on preludes but that big square bar, it's a support beam across the front, right about where you put that intercooler. Are you saying the new bumper allows the intercooler to fit?</TD></TR></TABLE>
what are you talking about? he has his bumper support completey off
btw you have a sick set up
Maybe it's not on preludes but that big square bar, it's a support beam across the front, right about where you put that intercooler. Are you saying the new bumper allows the intercooler to fit?</TD></TR></TABLE>
what are you talking about? he has his bumper support completey off
btw you have a sick set up
#16
Member
Join Date: Apr 2004
Location: Natchitoches, LA, USA
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (V8MeatHead)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by V8MeatHead »</TD></TR><TR><TD CLASS="quote">Where do people fit those intercoolers. Did you have to take out that front bar? Cause that's a big safety no no unless you want that engine in your lap.</TD></TR></TABLE>
Well..........removing the cat is an environmental no no........you gonna call mother nature??? Hey man.......sacrifices have to be made to smoke them V8's MeatHead. If you hit someone hard enough to shove the engine in your lap then you probably would've been fucked even with the bumper support. I'm member #106 of the FTFBSC. "**** the front bumper support crew"
REPRESENTIN'
Well..........removing the cat is an environmental no no........you gonna call mother nature??? Hey man.......sacrifices have to be made to smoke them V8's MeatHead. If you hit someone hard enough to shove the engine in your lap then you probably would've been fucked even with the bumper support. I'm member #106 of the FTFBSC. "**** the front bumper support crew"
REPRESENTIN'
#18
Member
Join Date: Apr 2004
Location: Natchitoches, LA, USA
Posts: 1,457
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (ChrisRicketts)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by V8MeatHead »</TD></TR><TR><TD CLASS="quote">Duh durr duh durrr.....So the intercooler goes in the front of the car. duuuhhhh durrrrrrrrr
</TD></TR></TABLE>
oh my God.
back to the subject at hand.....373whp & 296wtq @ 10psi.........YEEAAAHHH!!
</TD></TR></TABLE>
oh my God.
back to the subject at hand.....373whp & 296wtq @ 10psi.........YEEAAAHHH!!
#20
Junior Member
Join Date: Aug 2004
Location: Silverdale, WA, US
Posts: 856
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (DIRep972)
showing some love
There is one thing wrong though.... The setup should be in a 4th gen hehe jk
Nice numbers what are you going to set your psi to next time?
There is one thing wrong though.... The setup should be in a 4th gen hehe jk
Nice numbers what are you going to set your psi to next time?
#21
Honda-Tech Member
Join Date: Jan 2005
Location: Holley 4053, carb 406 stroker anal Luber, Fag
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: (ChrisRicketts)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChrisRicketts »</TD></TR><TR><TD CLASS="quote">oh my God.
back to the subject at hand.....373whp & 296wtq @ 10psi.........YEEAAAHHH!! </TD></TR></TABLE>
Chris Ricketts is ****** awesome
Looks good
BTW, thanks for answering my question I just was wondering.
back to the subject at hand.....373whp & 296wtq @ 10psi.........YEEAAAHHH!! </TD></TR></TABLE>
Chris Ricketts is ****** awesome
Looks good
BTW, thanks for answering my question I just was wondering.
#24
Guest
Posts: n/a
Re: (AznLuder704)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AznLuder704 »</TD></TR><TR><TD CLASS="quote">boosted ludes are teh s3x!</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bulldogg83 »</TD></TR><TR><TD CLASS="quote">Congrats John. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIRep972 »</TD></TR><TR><TD CLASS="quote">Lookin good John! </TD></TR></TABLE>
thanks to both of you guys for help and such along the way; good luck with both of your set ups
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iROCKtheSOHC »</TD></TR><TR><TD CLASS="quote">good numbers john i def wont mess with ur prelude when i see it .. lol</TD></TR></TABLE>
psshh, like were even thinking about it haha jk
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bulldogg83 »</TD></TR><TR><TD CLASS="quote">Congrats John. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIRep972 »</TD></TR><TR><TD CLASS="quote">Lookin good John! </TD></TR></TABLE>
thanks to both of you guys for help and such along the way; good luck with both of your set ups
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iROCKtheSOHC »</TD></TR><TR><TD CLASS="quote">good numbers john i def wont mess with ur prelude when i see it .. lol</TD></TR></TABLE>
psshh, like were even thinking about it haha jk
#25
space cadet
Join Date: Nov 2002
Location: Spec Shakesland
Posts: 6,091
Likes: 0
Received 0 Likes
on
0 Posts
Re: (iROCKtheSOHC)
i dont like how the A/F ratio dips low. for safety sake i would richen it up a tad bit in those leaner spots. not too much, but just a bit. other then that looks great!