phaphon

hey whats up i picked this car up around dec 2010. Picked it up for a good price off a friend.It had a spun rod bearing.So i fixed it, made a mistake rebuilt it for my dd so everything went back to oem.I previously had a boosted ls so of course i missed the power.After about 5000 miles of hard miles on the motor i boosted it. Bought a s300 hondata and put it together took it to get tune.Then boom goes the sleeves. so now im at it again drop the block off to mike at laskey racing. There it got sleeved, also picked up some cp pistons and eagle rods along with mircro polishing, and balancing the crank.This time around i took it to a local machine shop to assemble the bottom end.Then i put the rest of the motor together put it in.This time on the dyno i spin a rod bearing.So as of now the motor is back at laskey racing for them to assemble it. This time around i will be towing it to so cal to get tuned there.

parts list
benson sleeved 84 mm gsr
cp 10:1 pistons
eagle rods
acl race bearings
balanced rotating assemble

head
gsr head
super tech springs/retainer
ferrea 6000 series vavles
victor x manifold
750 rc injectors

turbo kit
turbonetics super v turbo .48 trim
tial waste gate
cast iron log manifold
ebay bov(yes i know i willing be looking for a quality bov once i get everything together)
threadstone ic

ems
hondata s300
boost by gear

i been through alot with this car and just wanted to share with everyone else so enjoy

phaphon

I'm trying to figure out how to post pictures at the momment. They will be up in a little.

phaphon

when i first cracked the sleeves

phaphon

pictures of the car






enjoy i will be updating as i go along this time

TypeRMOBBiN209

in for this

boofunit

how many psi were you running when you cracked the sleeve?

phaphon

I don't know tuner set my boost cut at 11 psi when a stock map sensor didn't read that high

racebum

boost cut doesn't mean a lot, what pressure was the wastegate blowing off? that's serious detonation you had going on

ek9.5

sickk keep up the good work

phaphon

the spring is a .9 spring and i was making about 240 wht and about 200 whp at about 5000 rpm let me look for the dyno sheet i think it was cuase of boost creep.The tuner said my waste gate vacuum line was connected wrong so i offered to fix it and he said its ok its not creeping so i thought it was ok and took his word for it

phaphon

thanks

phaphon

kyden

what the hell is going on with your air fuel ratios?

phaphon

idk i knew it was bad when i saw the sheet but i didnt know how bad it was till i let my brother in law look at it

thats also why im paying the money to tow it to socal this time

HeLLa iLL2ndGen

Here's a couple pics for you broo

gpr

lots of potential there. GL on the build

phaphon

Thanks and yeah I sure do got a lot more to do

phaphon

thanks rick

BignevadaBoB

Wow. Curious as to who "tuned" your car...

phaphon

new updates got my block back from laskey have not unwrap everything.Will start putting it all back together on sunday then hopefully i get to drop the motor in on monday.

phaphon

justYncredible

iTrader: (1)

damn that is some story you have there. i hope everything goes well this time around. but i agree about that fuel curve is almost not even there

phaphon

got the block put together and its in the car.hopefully will get it started this weekend

phaphon

Here's an update tuned it yesterday 241 178 at dnr with ny stock exhust

psidriven

congrats. how much boost was that at? hope the a/r is better this time.