200 hp goal, here is my setup. Will this setup take me there?
09-21-2003, 03:24 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Louisiana
Posts: 2,212
Likes: 0
Received 0 Likes
on
0 Posts
200 hp goal, here is my setup. Will this setup take me there?
Setup
d15b (jdm vtec) stock block retard timing. same as a d16z6 ~ 125hp
TD04 turbo
DSM g1 intercooler and BOV.
hallman manual boost controller(just set to 7.5 psi)
Ford 310cc injectors + fields controller / afc hack
E-cut (not installled yet) I'm hoping this will help out alot.
Gauges: EGT / A/F / Boost
My goal is 200 hp, I was around 160 with 5 psi. no cutout. I think my stock 's/dx' exhaust and cat was killing me. I figure install the cutout before the cat and bump but the boost.
Let me know what you think.
d15b (jdm vtec) stock block retard timing. same as a d16z6 ~ 125hp
TD04 turbo
DSM g1 intercooler and BOV.
hallman manual boost controller(just set to 7.5 psi)
Ford 310cc injectors + fields controller / afc hack
E-cut (not installled yet) I'm hoping this will help out alot.
Gauges: EGT / A/F / Boost
My goal is 200 hp, I was around 160 with 5 psi. no cutout. I think my stock 's/dx' exhaust and cat was killing me. I figure install the cutout before the cat and bump but the boost.
Let me know what you think.
Trending Topics
09-22-2003, 08:22 AM
#8
Junior Member
Join Date: May 2003
Location: USA
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
Re: 200 hp goal, here is my setup. Will this setup take me there? (untensadude)
i wouldnt really say that matters....i did it with afc hack, 450's and dsm fuel pump, stock fpr
Thread
Thread Starter
Forum
Replies
Last Post
Sinner
Forced Induction
5
08-01-2004 12:30 PM
BlackOutSi
Forced Induction
7
03-01-2002 04:35 PM