2.5" intercooler piping......too big?
#1
Honda-Tech Member
Thread Starter
2.5" intercooler piping......too big?
Ive got a teg with b20 in it right now but puttin a gsr back in soon. Its got a t3/t4 57 trim turbo on it and hitting a full 10psi by about 4100. would dropping the intercooler pipe size to 2-2.25" increase spool time. Or should i just leave it. Im putting on an HX35 within the next month.
#2
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: 2.5" intercooler piping......too big? (a1320honda)
Smaller piping is certainly less volume to fill, so you'll see some increased responsiveness. I personally don't think it's the direction you'd want to go though.
There are some other things you can do to decrease spool time, either through tuning, headwork, or cams.
There are some other things you can do to decrease spool time, either through tuning, headwork, or cams.
Thread
Thread Starter
Forum
Replies
Last Post
0ptimus prime
Welding / Fabrication
10
03-06-2005 06:30 PM