**Official Boosted DA Thread**
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Dont trip.
Posts: 3,818
Likes: 0
Received 0 Likes
on
0 Posts
**Official Boosted DA Thread**
Noticed the Boosted EF thread and i could not find one for DA's so i thought we should have one
Let's post up our DA (90-93 integra) FI setups! This means TURBO OR SUPERCHARGER. Please list full setup along with Power reached or Power goals and 1/4 times if you got em!
Ill Start off with mine
Sc61 7psi
Rcautoworks log mani
3inch DP
stock b18b with arpheadstuds
blox intake manifold
Let's post up our DA (90-93 integra) FI setups! This means TURBO OR SUPERCHARGER. Please list full setup along with Power reached or Power goals and 1/4 times if you got em!
Ill Start off with mine
Sc61 7psi
Rcautoworks log mani
3inch DP
stock b18b with arpheadstuds
blox intake manifold
#2
Honda-Tech Member
Join Date: Jan 2004
Location: Phoenix,AZ United States
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
VERY OLD pic
most recent pic but still old
SC34 thermal coated
Spark racing Manifold Thermal coated
3" Dp/full exhaust
B18 Golden eagle sleeved
ross 9.1:1 pistons
Pauter rods
Rocket dual springs and retainers
Supertech valves
P&P P75 Head
yaddda...yadddda....
most recent pic but still old
SC34 thermal coated
Spark racing Manifold Thermal coated
3" Dp/full exhaust
B18 Golden eagle sleeved
ross 9.1:1 pistons
Pauter rods
Rocket dual springs and retainers
Supertech valves
P&P P75 Head
yaddda...yadddda....
Last edited by smoovy; 11-19-2008 at 12:46 AM.
#3
Honda-Tech Member
Join Date: Dec 2003
Location: Somewhere Down Under!!
Posts: 1,918
Likes: 0
Received 0 Likes
on
0 Posts
Bout time we have a thread like this ..haha....
Old Pics:
Back When she was sitting low and had a stock lst setup
ebay turbo kit ( 13.5 at 105 at 5 psi)hehehehe
New pIcs: Will Update as i still throw some parts on her
New setup:Ls vtec turbo
B16 head
Itr cams
Itr dual valve springs
Port and polished
Edelbrock victor x
rc 1000s
walbro 255 lph
81.5 Ls Block stock sleeves (hehehe)
Wiseco 9:3.1
Dpr rods
ls crank
Ramhorn Manifold
Sc61( trying to sell for a borg warner s366)
HOping to break into the 10s with this setup!!!!!
Old Pics:
Back When she was sitting low and had a stock lst setup
ebay turbo kit ( 13.5 at 105 at 5 psi)hehehehe
New pIcs: Will Update as i still throw some parts on her
New setup:Ls vtec turbo
B16 head
Itr cams
Itr dual valve springs
Port and polished
Edelbrock victor x
rc 1000s
walbro 255 lph
81.5 Ls Block stock sleeves (hehehe)
Wiseco 9:3.1
Dpr rods
ls crank
Ramhorn Manifold
Sc61( trying to sell for a borg warner s366)
HOping to break into the 10s with this setup!!!!!
#4
Honda-Tech Member
iTrader: (3)
summer of 08"
b16a2
81.5mm bore
eagle rods
wiesco 9:1's
stock port head/ stock valvetrain
itr cams
rc 750cc's
turbonetics log manifold
ebay 57 trim .63 hotside
3in dp with full 3in mandrel bent exhaust vibrant black muffler
tial 38mm wastegate
hks ssqv bov
ebay fmic
street tuned on crome, never got any dyno numbers, on 9psi felt like 230-240whp on butt dyno.
winter 08"
car is currently NA, ebay turbo took a dump and I sold the old turbo kit.
new parts that I have, still waiting on turbo to come in the mail, and need a few more things.
Garrett T3 60-1 .63
Twisted Ram Turbo manfiold
rc 750cc's
hks ssqv
still need to order
intercooler, charge pipes and wastegate
shooting for 375-400whp on stock sleeves.
b16a2
81.5mm bore
eagle rods
wiesco 9:1's
stock port head/ stock valvetrain
itr cams
rc 750cc's
turbonetics log manifold
ebay 57 trim .63 hotside
3in dp with full 3in mandrel bent exhaust vibrant black muffler
tial 38mm wastegate
hks ssqv bov
ebay fmic
street tuned on crome, never got any dyno numbers, on 9psi felt like 230-240whp on butt dyno.
winter 08"
car is currently NA, ebay turbo took a dump and I sold the old turbo kit.
new parts that I have, still waiting on turbo to come in the mail, and need a few more things.
Garrett T3 60-1 .63
Twisted Ram Turbo manfiold
rc 750cc's
hks ssqv
still need to order
intercooler, charge pipes and wastegate
shooting for 375-400whp on stock sleeves.
#5
Honda-Tech Member
Join Date: Mar 2007
Location: pa, US
Posts: 2,848
Likes: 0
Received 0 Likes
on
0 Posts
About time we have a thread like this!!
Heres my da
B16 stock sleeves
weisco 9:1
eagle h beams
b16 head
skunk2 valvetrain
gsr cams
skunk2 intake
Nuekin mani
turbonetics 60-1
egay intercooler
2.5 in piping
rc750cc
s300 tuned
making 371whp 270wtq
Heres my da
B16 stock sleeves
weisco 9:1
eagle h beams
b16 head
skunk2 valvetrain
gsr cams
skunk2 intake
Nuekin mani
turbonetics 60-1
egay intercooler
2.5 in piping
rc750cc
s300 tuned
making 371whp 270wtq
#6
Honda-Tech Member
ls vtec
itr cams
itr springs
sls t3/44
tial 44
tial new style bov
gt35r(.63)
spearco 750hp intercooler
motec m4 ecu
motec JGM wiring harness
j1 LSD trans
DSS stage 3 axels
avid mounts
looking to make over 5 on pump gas
Trending Topics
#10
Honda-Tech Member
Join Date: Dec 2004
Location: Toronto CANADA
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
1990 Acura Integra LS Turbo
Black Hood
93 Integra Front Bumper Conversion
JDM One Piece Headlights
Type R Front Lip
Engine:
1995 B18b1 Block 130k
- New Headgasket
- New Timing Belt
- New GSR Oil Pump
- New Tensioner
- New Water Pump
- New Oil Pan Gasket
1995 B18b1 Head
- Fully Ported by Gord Bush
- Crower Springs and Retainers
- Crower 404 Cams
- ARP Head Studs
- Ported Type R Throttle Body
- Prelude Fuel Pressure Regulator
- RC 550's
- New NGK Blue Spark Plug Wires
- New NGK #8 Plugs
Drivetrain:
- YS1 Tranny
- Exedy 8.8lb Flywheel
- Bully Stage 3 Clutch
- Custom Driveshafts
Turbo Setup
- Precision PT6776 S Turbo (.70 A/R Compressor, 0.82 A/R Exhaust)
- Full Stainless Braided Feed (-3) and Return (-10) Lines
- K&N Turbo Filter
- Blox Log Manifold
- TurboSmart 38mm Wastegate
- TurboSmart VeePort Blow Off Valve
- TurboSmart Single Stage Boost Controller
- 2.5" Stainless Charge Pipes
- 2.5" Aluminum Back Door Pipe
- Custom Backdoor Intercooler (28 x 10 x 3)
- 3" Stainless Downpipe
- Full 3" Galvanized Exhaust
- DNA 3" Muffler
- GM 3 Bar Map Sensor
- Walbro 255lph Pump
FAL Slim Fan
Del Sol VTEC Rad
Universal Spinners Catch Can
Suspension
- Tokico Blues w/ Generic Coilovers in Front
- Omni Full Coilovers in Rear
- Energy Suspension Front Sway Bar Bushings
- Energy Suspension Front Sway Bar Endlinks
- Energy Suspension Radius Rod Bushings
- KVR Slotted Front Rotors and Pads
- 16" Enkei Rims with New 205/45/16 Sumitomo HTR Z Tires
http://www.youtube.com/watch?v=f6YGkoW4MEk
BLEW IT UP :D LOL
http://www.youtube.com/watch?v=M2c_UDARHec
Black Hood
93 Integra Front Bumper Conversion
JDM One Piece Headlights
Type R Front Lip
Engine:
1995 B18b1 Block 130k
- New Headgasket
- New Timing Belt
- New GSR Oil Pump
- New Tensioner
- New Water Pump
- New Oil Pan Gasket
1995 B18b1 Head
- Fully Ported by Gord Bush
- Crower Springs and Retainers
- Crower 404 Cams
- ARP Head Studs
- Ported Type R Throttle Body
- Prelude Fuel Pressure Regulator
- RC 550's
- New NGK Blue Spark Plug Wires
- New NGK #8 Plugs
Drivetrain:
- YS1 Tranny
- Exedy 8.8lb Flywheel
- Bully Stage 3 Clutch
- Custom Driveshafts
Turbo Setup
- Precision PT6776 S Turbo (.70 A/R Compressor, 0.82 A/R Exhaust)
- Full Stainless Braided Feed (-3) and Return (-10) Lines
- K&N Turbo Filter
- Blox Log Manifold
- TurboSmart 38mm Wastegate
- TurboSmart VeePort Blow Off Valve
- TurboSmart Single Stage Boost Controller
- 2.5" Stainless Charge Pipes
- 2.5" Aluminum Back Door Pipe
- Custom Backdoor Intercooler (28 x 10 x 3)
- 3" Stainless Downpipe
- Full 3" Galvanized Exhaust
- DNA 3" Muffler
- GM 3 Bar Map Sensor
- Walbro 255lph Pump
FAL Slim Fan
Del Sol VTEC Rad
Universal Spinners Catch Can
Suspension
- Tokico Blues w/ Generic Coilovers in Front
- Omni Full Coilovers in Rear
- Energy Suspension Front Sway Bar Bushings
- Energy Suspension Front Sway Bar Endlinks
- Energy Suspension Radius Rod Bushings
- KVR Slotted Front Rotors and Pads
- 16" Enkei Rims with New 205/45/16 Sumitomo HTR Z Tires
http://www.youtube.com/watch?v=f6YGkoW4MEk
BLEW IT UP :D LOL
http://www.youtube.com/watch?v=M2c_UDARHec
#11
My sleeper
90 Teg
JDM GSR swap
Jackson Racing Supercharger 8psi
DSM 450 (black tops)
Walbro Fuel Pump
Clutchmasters stage 4 (4 puck)
DC 4-1
Hasport DIY Hydro to cable conversion
Lots of other goddies
90 Teg
JDM GSR swap
Jackson Racing Supercharger 8psi
DSM 450 (black tops)
Walbro Fuel Pump
Clutchmasters stage 4 (4 puck)
DC 4-1
Hasport DIY Hydro to cable conversion
Lots of other goddies
Last edited by jdmland; 11-18-2008 at 03:44 PM.
#14
Honda-Tech Member
Join Date: Aug 2003
Location: 310, Ca
Posts: 2,462
Likes: 0
Received 0 Likes
on
0 Posts
here's mine...
332whp 268lbft @16.9 psi on a shitty 91 gas..
9.0:1 cp pistons bored to 81.5
eagle rods
p&p with crower 403s
t3/t04e 57 trim,labfab log manis,tial 38
rc 750 tuned via TurboEdit OBDO
332whp 268lbft @16.9 psi on a shitty 91 gas..
9.0:1 cp pistons bored to 81.5
eagle rods
p&p with crower 403s
t3/t04e 57 trim,labfab log manis,tial 38
rc 750 tuned via TurboEdit OBDO
#16
Honda-Tech Member
Join Date: Nov 2008
Location: Pa, USA
Posts: 2,426
Likes: 0
Received 0 Likes
on
0 Posts
#18
Honda-Tech Member
iTrader: (2)
Join Date: Aug 2008
Location: Concord, NH, united states
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Alot of nice clean DA's.
This is my DA.
stock head
stock sleeves
je pistons
eagle rods
RC750cc
skunk2 intake, TB
BDL fuel rail
Walbro 255
345whp 265ft torque
12.2@118 40degrees at the track
This is my DA.
stock head
stock sleeves
je pistons
eagle rods
RC750cc
skunk2 intake, TB
BDL fuel rail
Walbro 255
345whp 265ft torque
12.2@118 40degrees at the track
Thread
Thread Starter
Forum
Replies
Last Post