**offical poor man r boost thread**
08-19-2007, 04:18 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: fl, usa
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
**offical poor man r boost thread**
ok guys I havnt seen one of these threads yet... so lets see all of your poor man type R boost builds. What kind of numbers are you making, track times, and most of all PICS!!!
let the thread begin...
let the thread begin...
08-19-2007, 05:51 PM
#5
Honda-Tech Member
Join Date: Nov 2003
Location: Tulsa, OK, U.S.
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (slowteg90)
I guess I will start , I just got done with this set-up for my friend. Fresh motor started out at low boost for now but I will post the progress on this project.
Sleeved GSR 83mm bore
CP pistons
Crower rods
9:1 compression
B16 head
Rocket M21 cams
Rocket springs/retainers
Custom top mount
SC61 t3 turbo
13 psi (straight wastegate)
413hp/255tq
11.1@126 mph (3rd pass ever)
93' Si hatch (2337lbs w/driver)
Last night we took it to 16 psi :
477hp/305tq
We went to the track but it rained out , no runs !
10's coming soon !
Quad stage boost controller , GT40R and dual walbro fuel pump set-up in the works !
We have all the parts , just need to install them.
We should be turning up the boost around 25-30 psi for next week so I will keep you guys posted.
Sleeved GSR 83mm bore
CP pistons
Crower rods
9:1 compression
B16 head
Rocket M21 cams
Rocket springs/retainers
Custom top mount
SC61 t3 turbo
13 psi (straight wastegate)
413hp/255tq
11.1@126 mph (3rd pass ever)
93' Si hatch (2337lbs w/driver)
Last night we took it to 16 psi :
477hp/305tq
We went to the track but it rained out , no runs !
10's coming soon !
Quad stage boost controller , GT40R and dual walbro fuel pump set-up in the works !
We have all the parts , just need to install them.
We should be turning up the boost around 25-30 psi for next week so I will keep you guys posted.
08-19-2007, 05:59 PM
#6
Junior Member
Thread Starter
Join Date: Jan 2006
Location: fl, usa
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (Humble Performance)
^ sweet.. got anymore info on the M21 cams?
Im starting my build somewhat soon... lol. It will probably be stock block @ head for a little while until I get money to build the block in the garage..
lets keep em coming
EDIT: I found some info on the M21 cams.
Cam Type Int. Dur. Int. Lift Ex. Dur. Ex. Lift
M20 274 11.5 274 11.5
M21 274 11.6 274 11.6
M22 284 12.1 284 12.1
M24E 303 12.7 303 12.7
M24X 298 12.7 305 12.1
M25 310 12.1 310 12.1
M25E 316 13.25 216 13.25
L21 262 10.2 262 10.2
Im starting my build somewhat soon... lol. It will probably be stock block @ head for a little while until I get money to build the block in the garage..
lets keep em coming
EDIT: I found some info on the M21 cams.
Cam Type Int. Dur. Int. Lift Ex. Dur. Ex. Lift
M20 274 11.5 274 11.5
M21 274 11.6 274 11.6
M22 284 12.1 284 12.1
M24E 303 12.7 303 12.7
M24X 298 12.7 305 12.1
M25 310 12.1 310 12.1
M25E 316 13.25 216 13.25
L21 262 10.2 262 10.2
08-19-2007, 06:04 PM
#7
Honda-Tech Member
Join Date: Nov 2003
Location: Tulsa, OK, U.S.
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (slowteg90)
I have sold many sets to Puerto Rico and tried them on this set-up , they work very well ! I did not do a before/after comparison on this set-up but my guy in P.R. has seen 40 hp increase at the same boost levels.
Trending Topics
08-19-2007, 06:09 PM
#8
Honda-Tech Member
Join Date: Dec 2000
Location: P.S.L, FL, USA
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (slowteg90)
Darton sleeved GSR 84.5 mm
CP 9.8:1 pistons
Pauter rods
REV B16 Head
Victor X intake mani
Skunk2 70 mm TB
Competion twin disc clutch
Topmount T4 mani
Precision Gt4067
Precision 750 intercooler
Precision 1000 cc injectors
Weldon fuel pump and filter
-8 feed
-6 return
BDL Fuel rail
3 inch charge piping
AEM EMS tuned at speed injected
AEM Uego.
4 inch downpipe and exhaust
APEXi Avc-r boost controller
Tial blow off and 44 mm gate.
Power in the sig 27 psi
CP 9.8:1 pistons
Pauter rods
REV B16 Head
Victor X intake mani
Skunk2 70 mm TB
Competion twin disc clutch
Topmount T4 mani
Precision Gt4067
Precision 750 intercooler
Precision 1000 cc injectors
Weldon fuel pump and filter
-8 feed
-6 return
BDL Fuel rail
3 inch charge piping
AEM EMS tuned at speed injected
AEM Uego.
4 inch downpipe and exhaust
APEXi Avc-r boost controller
Tial blow off and 44 mm gate.
Power in the sig 27 psi
08-20-2007, 06:40 AM
#9
Honda-Tech Member
Join Date: Jan 2006
Location: Tallahassee, Fl
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (Lonnie)
Whats up Lonnie ?
This is Andrew, I was Terrances Taxi ride down to P.S.L to pickup those red body panels from ya
Good to see your #'s man! Very impressive!!
This is Andrew, I was Terrances Taxi ride down to P.S.L to pickup those red body panels from ya
Good to see your #'s man! Very impressive!!
08-21-2007, 05:38 PM
#12
Honda-Tech Member
Join Date: Nov 2003
Location: Tulsa, OK, U.S.
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (Humble Performance)
Update :
Sleeved GSR 83mm bore
CP pistons
Crower rods
9:1 compression
B16 head
Rocket M21 cams
Rocket springs/retainers
Custom top mount
SC61 t3 turbo
22 psi
513hp/300tq
93' Si hatch (2337lbs w/driver)
Sleeved GSR 83mm bore
CP pistons
Crower rods
9:1 compression
B16 head
Rocket M21 cams
Rocket springs/retainers
Custom top mount
SC61 t3 turbo
22 psi
513hp/300tq
93' Si hatch (2337lbs w/driver)
08-21-2007, 10:56 PM
#13
Junior Member
Join Date: Jul 2002
Location: USA
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (Humble Performance)
Almost finished and ready to drop in. I'll get numbers asap..once she's in!
B18c1/B16a1
JE 9.5
Eagle H-beams
AZeng Block guard
ARP studs, top and bottom
Skunk2 Complete Valvetrain
Blox B Cams
LoveFab MiniEQ
GT3082R
OBX Manifold..Modded to fit
AEM Rail
RC1000s
Thats everything thats engine only related.
B18c1/B16a1
JE 9.5
Eagle H-beams
AZeng Block guard
ARP studs, top and bottom
Skunk2 Complete Valvetrain
Blox B Cams
LoveFab MiniEQ
GT3082R
OBX Manifold..Modded to fit
AEM Rail
RC1000s
Thats everything thats engine only related.
08-22-2007, 02:47 AM
#14
Re: **offical poor man r boost thread** (XSIintegra)
B16 head
fererra springs/retainers
crower stage 1 allmotor cams
GSR block
manley turbo tuff rods
Ross racing pistons 8.2 CR 81.5mm
ARP head studs
costom top mount manifold
Holset HX40
HKS 50mm gt gate
4"dumps mid car
1000cc's S300
JDM SIRG trans W/ LSD
CC twin disk
waiting to install my STR intake manifold and 72mm TB. soon...
fererra springs/retainers
crower stage 1 allmotor cams
GSR block
manley turbo tuff rods
Ross racing pistons 8.2 CR 81.5mm
ARP head studs
costom top mount manifold
Holset HX40
HKS 50mm gt gate
4"dumps mid car
1000cc's S300
JDM SIRG trans W/ LSD
CC twin disk
waiting to install my STR intake manifold and 72mm TB. soon...
08-26-2007, 06:38 AM
#16
Honda-Tech Member
Join Date: Nov 2003
Location: Tulsa, OK, U.S.
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (slowteg90)
Update :
We went to the track last night and managed to get one decent pass and managed to run 10.83@135 mph . The other 2 runs the i/c piping came off but we will fix that this week and try it again. The car has way more in it , I will keep you guys posted !
We went to the track last night and managed to get one decent pass and managed to run 10.83@135 mph . The other 2 runs the i/c piping came off but we will fix that this week and try it again. The car has way more in it , I will keep you guys posted !
08-27-2007, 12:51 PM
#18
Honda-Tech Member
Join Date: Nov 2003
Location: Tulsa, OK, U.S.
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (slowteg90)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowteg90 »</TD></TR><TR><TD CLASS="quote">sweet.. got any race day pics?</TD></TR></TABLE>
Here is a video of the only run we got with the i/c pipe not blowing off , not the best run but next week we should fix the little problems. Look how bad it bogged :
http://www.humbleperformance.c...5.wmv
This was done with 490hp and the car weighed 2331lbs with me in it.
Here is a video of the only run we got with the i/c pipe not blowing off , not the best run but next week we should fix the little problems. Look how bad it bogged :
http://www.humbleperformance.c...5.wmv
This was done with 490hp and the car weighed 2331lbs with me in it.
08-30-2007, 11:03 AM
#19
Join Date: Mar 2006
Location: beaumont, texas, u.s.
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (Humble Performance)
stock gsr block
fully built b16 head
355hp/236tq on 14psi...then the ringlands cracked
new build coming soon, just trying to decide to sleeve it or not.
fully built b16 head
355hp/236tq on 14psi...then the ringlands cracked
new build coming soon, just trying to decide to sleeve it or not.
09-06-2007, 07:40 AM
#22
* B A N N E D *
Join Date: Jul 2007
Location: Selling HIDs to you, Everywhere, USA
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
Re: **offical poor man r boost thread** (SwappedTURBOegg)
Hey slowteg90
I made a thread on how you scam people
http://www.hondamarketplace.com/zerothread/2090305
I made a thread on how you scam people
http://www.hondamarketplace.com/zerothread/2090305
