SPA B-Series Topmount (BNIB) // Nippon P72's // B16 head (PnP) // GSR cams
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Holiday, FL
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
SPA B-Series Topmount (BNIB) // Nippon P72's // B16 head (PnP) // GSR cams
I'm selling these items since I've decided to scrap a build project for other interest. These items are new and have never been used (except head and cams) therefore they're out of the box practically. Price is firm
*SPA Turbo topmount cast manifold (S/N:TM-H-04) (the real thing, not an Ebay knock-off) - SOLD
*GSR Nippon Turbo pistons w/rings (P72A0 81.5mm with full floating wrist pins for forged rods) - $100
Compression with these pistons is as follows with the following combination of typical B series setups using an OEM gasket (no milling/decking)
LS/VTEC with B16 head - 10.62:1
LS/VTEC with GSR head - 10.85:1
GSR - 10.10:1
GSR with B16 head (Poorman's R) - 9.9:1
B16 head with mild porting - $300 everything except valves and springs (more pics below)
2000 GSR Cams alone - $75
The labeling is an obvious typo since it mentions PR3 but say's (D18A1) when obviously its meant to say B18A1/B1 or for that matter fitment should be applicable to any B-series piston of 81.5mm
PM me for Paypal details, I will ship using flat rate boxes through USPS so pricing on shipping will range from $10-$15 roughly.....
*SPA Turbo topmount cast manifold (S/N:TM-H-04) (the real thing, not an Ebay knock-off) - SOLD
*GSR Nippon Turbo pistons w/rings (P72A0 81.5mm with full floating wrist pins for forged rods) - $100
Compression with these pistons is as follows with the following combination of typical B series setups using an OEM gasket (no milling/decking)
LS/VTEC with B16 head - 10.62:1
LS/VTEC with GSR head - 10.85:1
GSR - 10.10:1
GSR with B16 head (Poorman's R) - 9.9:1
B16 head with mild porting - $300 everything except valves and springs (more pics below)
2000 GSR Cams alone - $75
The labeling is an obvious typo since it mentions PR3 but say's (D18A1) when obviously its meant to say B18A1/B1 or for that matter fitment should be applicable to any B-series piston of 81.5mm
PM me for Paypal details, I will ship using flat rate boxes through USPS so pricing on shipping will range from $10-$15 roughly.....
Last edited by DC_Legacy; 09-06-2015 at 09:28 AM.
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Holiday, FL
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post