Hondata S300 V3 not properly working. Options "grey'd out"
#1
Hondata S300 V3 not properly working. Options "grey'd out"
Hi, so I am in the process of building my 97 Integra. I bought a Hondata s300 v3 that was socketed into a P28 ecu from teknotik here in Canada. The ecu was refurbished with new capacitors and the s300 was socketed in house. I finally installed my s300 as per hondatas instructions. Problem is everything is greyed out. I am not able to datalog or make any changes. The car will start and run, but has a rev limiter at 4000 rpm. If my computer isnt connected the car will still run but idles at 2000rpm and still has a limiter at 4000 rpm. Everything is up to date and all drivers are installed. My D4 green light is on, but no D3 light. although my d2 red light is blinking. Any ideas??
#4
Re: Hondata S300 V3 not properly working. Options "grey'd out"
#6
Honda-Tech Member
Re: Hondata S300 V3 not properly working. Options "grey'd out"
Thread
Thread Starter
Forum
Replies
Last Post
94GSRMR
Engine Management and Tuning
7
09-29-2010 12:06 PM