Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)

- Engine Machining & Assembly (https://honda-tech.com/forums/engine-machining-assembly-164/)

- - Head testing (https://honda-tech.com/forums/engine-machining-assembly-164/head-testing-3332324/)

HondaJax

01-06-2019 06:15 PM

Head testing

Im taking my head to be pressure tested and resurfaced tomorrow. Do I need to take the cover or any components? Im a newb to machining.

TomCat39

01-07-2019 11:25 AM

Re: Head testing

I had to take the head apart to the point of not cams or rocker arms and no dowels.
I left the spings/retainers and valves in place.

Ask you machine shop, they will tell you how they would like to receive the head.

muellersfan

01-07-2019 08:43 PM

Re: Head testing

Quote:

Originally Posted by TomCat39 (Post 51824460)

I had to take the head apart to the point of not cams or rocker arms and no dowels.

^

Also remove the sensors and water outlet cover.

All times are GMT -8. The time now is 11:50 PM.