Honda-Tech - Honda Forum Discussion - ARP bolts on Manley rods

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)

- Engine Machining & Assembly (https://honda-tech.com/forums/engine-machining-assembly-164/)

- - ARP bolts on Manley rods (https://honda-tech.com/forums/engine-machining-assembly-164/arp-bolts-manley-rods-3312464/)

Chad golding

12-21-2017 01:44 PM

ARP bolts on Manley rods

What are the torque specs on arp bolts on Conrods on a b18c2

TomCat39

12-21-2017 09:34 PM

Re: ARP bolts on Manley rods

ARP would be the ones to ask, it's their bolts so they would know the stretch.

boosted94gsr

12-22-2017 02:21 PM

Re: ARP bolts on Manley rods

The instructions that came with my b18c manley rods said 60 ft lbs with 30 wt oil. I did it in 2 steps, first 30 ft lbs then 60 ft lbs after dipping the bolts in straight 30 wt oil.

Chad golding

12-25-2017 04:06 PM

Re: ARP bolts on Manley rods

Quote:

Originally Posted by boosted94gsr (Post 51517579)

The instructions that came with my b18c manley rods said 60 ft lbs with 30 wt oil. I did it in 2 steps, first 30 ft lbs then 60 ft lbs after dipping the bolts in straight 30 wt oil.

Thank you, I’m just doing a bearing check as I had a bad fuel contamination in the oil. Thanks again I didn’t have the torque specs.

All times are GMT -8. The time now is 02:36 PM.