boostedcivicsir

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings.

MrParks

RC Eng 1000cc injectors. like new mint cond. used for 3 passes. 250.00


blox 76mm throtlebody. new in bag not opened. 275.00



vband kits. aluminum 4" 45.00, 3 " aluminum 35.00, 2.5 inch steel 35.00, 2.5 inch aluminum 35.00. all new.


burns stainless muffler 4" i.d 8 inches in length. mint.
180.00


moroso heavy duty kill switch
25.00


-Motec M4 (unlocked) w/ B series harness set up for 8 injectors(needs to be cleaned up) includes PLM wide band, and 5 bar map $2200 (sale pending first come first serve)

-Brand New never installed PCS datalogger touch screen dash, includes harness, accelerameter/g-meter, mark williams axle clamp with magnets for driveshaft speed, a 500 psi press. sensor, a 250 psi press. sensor, a msd mag pick up sensor $1100


-Penske front shocks w/external resovoirs $900

-MSD Programable Digital 7 w/traction control (got this from Bothwell was specially set up for GM for extra punch, can't buy this setup) have brand new wiring harness in the box for it $680


-MSD 7al-2 $250

-Front facing Full Race Turbo manifold w/two wastegate set up(jet hot coated silver) includes 2 innovative turbo wastegates, 3.5 in downpipe $1100 (sale pending)



-Garrett gt42r turbo, 70mm inducer, 67mm turbine, includes 2 divide housing exhaust housings, a 1.34 A/R and a 1.19 A/R $1,400



-Turbonetics blowzilla bov $120

-DSR mechanical fuel pump with drive $350

-Ferrea Roller Rocker set-up with cams, springs, retainers, spring seats $1500



all parts are subjected to shipping fees and 3% unless we arranged other means.

all items are first come first serve basis. unless i know you, or have done business in the past, i will not hold it for you. first to pay ships next day. used items are as is and all sales are final.

boostedcivicsir

EDIT...........I MAY SPLIT KIT UP, IF PRICES ARE RIGHT!!!!!!

https://honda-tech.com/forums/forced-induction-16/my-t3-t67-h-o-build-lotsa-pics-56k-eh-try-1482648/

full race pro street stage 3. t3t67ho. p trim. .70/.82
22x11x3 intercooler tial 50mm
tial 44mm wastegate with under oil pan dump tube.

this is a complete kit.

im not gonna lie, new in 06, turbo replaced in o7, it has seen over 32 psi for most if its life.

plumbing is different from pic.

fits b16 head vic x mani.

i made over 700whp with this kit. best time so far was a 9.98 at 147.

this kit will be available after the etown event.
3000.00 shipped. (neg)

and this:
MSD 75611 analog programmable rev limiter. i have had thisin my car for 2 seasons, only used 1, wires are as long as i could leave them. they werent cut to fit. works with all analog boxes, using mine on a 6al. we have gone a different route with this. summit has them for 250~ ill let it go for 200 shipped.



http://www.msdignition.com/Products/RPM/Timing_Controls/RPM_Controls/75611_-_Programmable_Launch_Rev_Control.aspx

WHTZ

RC 1000cc injectors 280$ shipped (538 miles on them)
3 bar map sensor 80$ shipped
K20z1 stock injectors. Make offer


PAYPAL: Syblue01@aol.com

SD_Lurker

iTrader: (4)

Hondata s300 installed in a Hondata converted p28 obd2b plug w/ boost option BRAND NEW

I also have a BRAND NEW GT35R T3 with anti-surge comp housing and 4 bolt exhaust.. .82ar

Slow00si

Me and my wife have owned this car for almost 7 years now and has always been our daily driver and still is until it sells. The current motor has about 50k miles and is starting to make a little noise but doesnt sound like rod knock. but im including a justice racing sleeved gsr block with the it. The chassis has 172k on it and im looking to get $4000 for everything or ill sell as a rolling chassis or whatever combination you want just let me know and i can give you a price on what your interested in, but i will not start parting anything out until the chassis is gone slow00si@msn.com

motor thats in the car at the moment-
*Eagle rods with Je 9:1 pistons
*supertech springs and retainers
*skunk 2 camgears
*arp headstuds
*edelbrock victor x intake manifold
*act ss clutch

*kteller 2.5" ss exhaust kit with a magnaflow resonator and a vibrant black oval muffler good sound
*dc 4-2-1 ceramic header that cracked and has been welded up where it goes towards the middle collector doesnt look the best but doesnt leak anymore
*gutted stock cat

misc.-
*pwr full width aluminum radiator
*abs had been deleted the correct way with all brand new oem lines and proportioning valve
*slotted front rotors
*koni yellows with eibach sportline springs and progress front camber kit
*aftermarket pursuit alarm
*no a/c and all emissions removed from the engine bay
*cruise control removed

interior -
*usdm itr front seats no rips or stains
*jdm itr rear seats faded on the top of the back piece from the sun but no rips or stains
*otherwise all stock in really good shape
* stock cd player but the cd player wont work but the radio still works fine
* itr shift boot

exterior-
*real s2k antenna
*carbon fiber hood needs to be recleared
*rear wiper deleted - still have all the rear wiper stuff
*oem itr front lip
*has typical parking lot dents and dings but nothing very major, and paint is faded
* needs a new front bumper from some lady backing into it barely, her exhaust punctured it but didnt get into anything else

Extra sleeved block-
*84mm gsr block sleeved by justice racing, needs 1 sleeve replaced, quoted $375
*manley turbo tuff rods, need 1 new one once sleeve is replaced
*i believe their cp pistons, low compression, but it will need one replaced because the skirt broke on one, hence why it needs a piston a rod and sleeve in 1 cylinder
*arp main studs with stock girdle

h22 civic

silver pro comp 2.1/16 water temp gauge 100-250 temp=30 bux
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux
aem twin fire and aem pencil coils make offer
aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $700
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux

2- 205 50 15 mickey thompson et drag radials basically brand new used for 1 day of photo shooting (not 1 burn out on them) sold
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc

fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_________

MoiMotorsports

selling the rolling body with weld wheels its on e bay will take parts off to fit your budget


http://cgi.ebay.com/ebaymotors/95-ho...eetQ5fLegalQ5f
i have a full swap out of my own car has been to 5 events this year no street miles some dyno tume motor is fresh the best parts went into it no shorcuts sooo dont low ball me if you dont like my price keep it movin ill keep the swap before i sell it motor is still in car and running.

ls 81.5 custom wisco 13to1 pistons
eagle rods
all new honda bearings
new oil pan p73
new girdel pick up
new oil pump
main studs
low low mi... motor with no head is 1800

gsr head port work has 20hrs on it
the best 3 angel valve job
ferra 1 peice comp seres valves
skunk2 springs and retainers
with crower cams 2000 firm

trans all new parts
the only parts that are used anr the 12mm bots on the case
quafi gear set with a quafi diff
4000


2 NOS kits direct port with bottles are full scat crank part #4-HONDA-95MM-1771...(B Series engine)95mm Stroke x 1.772 pin diameter, .935 rod width one rod journal had a rod fail needs to get cut..
new there $649 selling for $300

BOOST336

Hey iam looking to sale a set of r/c fuel injectors in great shape just went with bigger on on my new set up. iam asking 150 fir the injectors shipped.
I am also selling a aem fuel and ignition controller like new only used for two months then went with a standalone. the model # on the controller is 30-1910 iam asking 300 shipped obo for more info or pics pm me or email me at treflipking@gmail.com


thanks

01DC4

iTrader: (3)

EG Fluidyne,Mint condition, Never used, Full polish, -16 Outlets, SOLD.
Located in Daytona Beach, Will ship at your cost.

MiamiVR6T

SOLD

V-SPEC 1

Precision 1600cc injectors in excellent condition-$395
FJO injector driver-$145
Carbonetic carbon twin disc comes with throwout bearing in great condition-$995 obo
Defi BF gauge controller brand new-$99 obo
Synapse 50mm wastegate with v-band clamps in good condition $147 ea or $244 for both
PWR radiator brand new full size-$296
(4) male -20 AN Weld-on bungs for use with Aluminum Radiators, Overflow Tanks, Oil Tanks, Oil Pans, etc. to provide adapters for return or feed hoses, pressure gauges, turbo drainbacks or other custom plumbing requirements-$93

SPOOLINmatt

ARP Head Studs
GSR B18C1....Also works with LS VTEC setups

Torqued a few times, just upgraded to stronger studs for the hell of it...these still hold just fine.

75$ shipped.

Catch can setup for sale...Bolts to a 96-00 civic driver side wheel well. It holds about a gallon and is baffled with 2 filters. It has 3 -8 ports on top that are where the AC dryer cylinder would usually be. I have 2 of the ports connected to the valve cover. Im selling the custom can with valve cover and lines to connect it.
$350.00

Pic doesn't show the filters in place because this was during fabrication...but there are 2 side by side, the same size as the "standard" catch can setups out there. It has a drain plug at the bottom.

SpeedSceneScott

THIS CAR IS SUPER LIGHT!
CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled & complete, but missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified 4130 chro-moly cage.
New paint, New Lexan, 2 brand new clutches including one high doller , Fresh Gear-Speed trans with zero miles on it with spool, New fuel cell, New Hasport mounts, New axles, New traction bar, Koni shocks, more more more.
All welding and fab work done and painted. Fuel cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.

http://s976.photobucket.com/albums/ae248/scottlucky/

>>>>NOW JUST $2900.00 <<<<<<<<<<
Call 714 342-6485
Located in Orange county, not far from Disneyland.

Andy@AMR

C&R Half sized Radiator w/ -6 turbo feed bung welded on the bottom.

Includes Slim Fan. 225 shipped.

turbotypeR@SPEC

Turbonetics T3/T04b "super-v" compressor w/57trim turbine wheel in a .63a/r housing $500


Tial 38mm wastegate- SOLD

Drag Accord F22B turbo manifold-$150 obo


AEM Accord F22B Fuel rail and regulator-$150 obo

Drag FMIC-SOLD

Greddy Type RS BOV-SOLD


94-97 Accord Fluidyne Radiator. May fit Prelude and others as well-$225 obo

AllMotorRandy

Just a few things laying around that I'd like to get rid of. Thread will be updated weekly. ALL parts sold AS-IS!!! Email me @ uniquerandyr@yahoo.com, call or text @ 562-229-2061 for any questions. Located in So Cal. Thanks for looking! Please bump it!

RACE Parts!!!

H22A race block, Golden Eagle HD sleeves (90.5mm), Custom Arias Pistons (.0045" P2W), Cryo treated H23 crank (95mm), ACL Main (.0020"), Rod (.0020") and Thrust bearings, fully balanced, H2B ready.

$2500



GSR/B18C1 Darton Open Deck Sleeved Block, matching main caps, used for 84.5mm, may need to be honed to 85mm.......$850



RC Peak and Hold Injectors PRC-1000, 1000cc...... $240



DC Sports Dual Bend Short Shifter, Opened but never installed....... $50



Skunk2 Single Bend Short Shifter, needs new ball bearings...... $20

sa594

Selling Autronic smc version 1.18 $1000.00 obo

Boosted-EH-804

Well I have been doing a lot of thinking and its time to move on. I have to focus on some other things in life and the car is not one of them. So up for sale is my entire setup from ECU to Radiator everything must go. I prefer to keep it together but Im sure a good bit of people wont have this kind of coin laying around 6500 takes it all there is close to 9k worth of parts here. The trans will be sorted out before it is sold this does not include the turbo/wastegate if you want the turbo/wastegate tack on another 1000 and that will have a fresh rebuild on it.There are a ton of pics in my build thread. If you want the entire car pm me and we can figure out a price for that as well.

If it doesnt sell as a whole I guess eventually I will part it out but prefer to let it all go to one person.This setup has only a few miles on it and some dyno time so everything is minty fresh

D16z6/A6
vitara/FJ Ibeams
new oem oil pump
Performance Porting stg4 w/FI port n polish and 3angle vj
Supertech springs retainers
Bisimoto 3.6
S2 Cam gear
Venom sheetmetal intake mani
omni 70mm TB
FIC 1230cc inj
GE fuel rail
All fuel lines are AN fittings w/inline filter
Aeromotive FPR
Goauto modded Topmount w/3in DP 44mm vband dump w/pipe
Goauto backdoor intercooler w piping coupler and tbolts
p28 w/demon, pwm boost control and innovate lc-1
RCautoworks custom radiator w/-16 an bungs all lines included
Spal 13in fan
RCautoworks catch can 2-10's from the vc 1-12 to the block
B&R black Box delete fitting -12
custom VC with -10 fittings
stock ls trans
Speed Factory's First D2b kit
Competition clutch custom D2b flywheel
comp stage 5 clutch
Custom drivers side mount
and all hardware that makes it work.

The motor runs fine trans will be looked at like I said if you need proof that it runs I can arrange that as well. Thanks for looking

ctr-ek

BRAND NEW NEVER USED OR MOUNTED skunk 2 pro series manifold for a b16/type-r head its drilled out for a 4 fogger system--230bux!

located in NORTH BERGEN NJ, I can also ship it out with no problem at buyers expense + paypal fees

text or call 551-556-1069 NO BLOCKED CALLS!

DaveF

***asking 10,000***

(this does not include suspension/wheels/drivetrain / NO extras, besides whats listed below)



will entertain trades for "street car" type vehicles. let me know what you have
__________________________________________________ ________

1992 honda civic si racecar chassis

* 10pt chromoly cage with parachute mount/wheelie bar hookups
* Custom aluminum dash, door panels and interior panels
* chromoly wheelie bar with wheeleze wheels
* stroud window net
* omp race seat
* FAL lexan windows (race kit) * Lexan sunroof *
* MB Products fiberglass doors with chromoly frames and lexan window with stainless allenhead bolts/nylock nuts
* Tube front end with midplate & chromoly timing belt side mount
* clearanced for 28" tires
* Acura sundance gold pearl paintjob
* entire chassis was sand/bead/media blasted before paint
* Carbon fiber front nose
* spare tire well is cut out, with flat aluminum panel covering


















__________________________________________________ _______________


************* fully unlocked Motec M48, with Data cable and a brand new flying lead harness. (this is a motec harness)

2200.00


__________________________________________________ ________________________


**********also have a milspec harness, built by me, with tefzel wire/raychem dr-25, deutsch connectors etc. 1200.00

this is the harness before i added in the extra 4 injectors (it now has 12injectors )



__________________________________________________ ______________________________


Front mount B series T4(split housing) turbo manifold
- 304 stainless, tig welded by Jm Fabrications
- does not come with wastegate flanges
- has extra mount for support
- 800.00 + shipping







__________________________________________________ __
Garrett Gt4202R Turbo
- 74mm
-1.10 a/r exhuast housing
- ball bearing
-water cooled
- includes inlet restricter flange
- includes compressor and turbine discharge flange and v band clamps
- does not include air fitting
1500.00 + shipping









__________________________________________________ __


__________________________________


JM-Fabrications / Spearco water to air intercooler
* 4-inch v band inlet and outlet
* -12AN water outlet fittings
* -12AN drain

550.00 Shipped










__________________________________

______________________________

All associated lines/fittings
* 12an fittings on tank & intercooler
* 3/4 shut off valve on tank for drain
* hose is 3/4 inch
85.00 shipped

_______________________________________

_________________________________

Hydraflow clamps 225.00 each
* fits 4inch tube
* i have 4 clamps





______________________________________



* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping









_________________________________________________


*obd2b to obd2a jumper harness
150.00


______________________________________________ -

* eibach front and rear sway bar kit with endlinks etc, i belive its everything for installation. 250.00










__________________________________________________ _______


Oil Catch can
80 shipped
* fits 1-3/8 filter
* -12 an male bung
* 1/4npt drain/plug













__________________________________________________ __

0554

innovative lc-1 with 1 brand new sensor and one used still working sensor - $150

Omnipower 18k rear 12k front drag coilovers for eg/dc $750

12'' slim fan $50

odyssey pc680 with mounting bracket $125

Black weld mangnums 13x9 with m/t 24.5x9x13

garrett 24x12x3.5 core with custom endtanks $500

Allmotor B20

I'm selling my 90 Civic PRO ALLMOTOR Car rolling chassis,K-series ready, no motor, no electronics, cage is NHRA certified to go 8.50s, Comes with a 2gl jazz fuel cell, venom fuel pump, kierkey race seat, cnc stageing brake, 2 sets of DriveshaftShop shafts for K-series, K-series hasport mounts solid, Skunk2 upper control arms, custom lower control arms, Penske front shocks, Strange Rear shocks, Kens Kustom whellie bars, Kens Kustom rear trailing arm with spindel mount Weld Wheels with M/T tires, Weld magnum front wheels 15by 8 with M/T tires 26/8.5/15, Custom one piece carbon fiber front end, Fiberglass doors, Custom Pro Stock wing and much more>>>>>
$9.000.00 or B.O.

OMG B16

Karcepts RBC Throttle Body adaptor with two 1/8npt ports - 50$ Shipped

EP3 Idler pulley with brand new belt for k20 - 80$ Shipped

Fuelab 85-125psi base Fuel Pressure Regulator - 130$ Shipped
All black, Brand new, only mounted, no fittings, -10an side ports, -6an bottom/return port.

EP3 5 speed Tranny - 550$ Local, 620$ Shipped
Shifts smooth, no grinds, will come with vss and slave cyl.

K-TUNED Passenger side radiator with -16an upper line, black line and fittings - 300$
Will include the coolant port that bolts onto the head with a -16an fitting already on it for an additional 10$

Modded RBC - 175$ Shipped
-8an Fitting welded underneath for brake booster, holes drilled/tapped for direct port kit. Cut for a2/z1 ect...

Hasport EKK2 K-series in EK mounts - 400$ Shipped
Never ran, but have been mounted. A few missing bolts, fresh flat black powdercoated brackets.

K20a2 TB - 150$ Shipped
Karcepts IACV block off plate, Good TPS, good map sensor. No TB cable bracket.

Tunerviewer II with k-series box - 125$ Shipped
One of the buttons came off, only one is necessary for use anyways. Good working condition.

Direct Port DRY 4cyl Nitrous Kit - 325$ Shipped
Nitrous PRO-FLO 350hp Nitrous Solenoid(NEW)
-4an Feed Line
10lb NOS Nitrous Bottle

KTUNED Throttle Cable Bracket and Cable! - 65$ Shipped
New, never used, just mounted.

KTUNED Black clutch line - 70$ Shipped
New, never used, just mounted.


K20 Starter - SOLD
K20 Alternator - SOLD
02-04 RSX Engine Harness - SOLD
ID1000 Injectors and clips - SOLD
Hytec Replica Swap header - SOLD
Golden Eagle K-series Fuel Rail, Polished - SOLD

PM or TEXT me.
Cole - 954-501-5894


Will be adding some more stuff soon.

Pics: Sorry, everything is kinda dusty from sitting.











RBC Not included.

rickbeastwood

I HAVE A FEW HONDA PARTS FOE SELL
$650 obo AEM ems 30-1050 set up for C.O.P. Aem just inspected ecu and PASSED, WILL PROVIDE RECEIPT. Could put back to distributor set up.
$200 obo Aem twin fire with 600 cbr coils. Aem just replaced whole board, like new….
$425 obo K24 BLOCK AND CRAKN and water pump housing. Crank needs to be micro polished.
$200 obo K20z3 rbc-2 head, no cams, no valve cover, no intake manifold, no sensors
Prices not include shipping, Will ship ASAP