March WTB Sticky, Please Read Rules
Please read the rules for the new thread
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts! 2) Do NOT repost your thread over and over hoping to get it on a new page. If you find what you're looking for please remove them from your post. If you find everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it. 3)You are ONLY allowed ONE post in this thread, if you are found to have more than one post, all of your posts will be deleted. 4) NO FS ADS! We will delete any BS we feel does not belong in here |
Re: March WTB Sticky, Please Read Rules
WTB: T4/P-Trim 1.15ar Divided Housing for the T4/T67. I have a used T3/67ho .82 housing and a new T4 open .96ar V-Band for the T67 if a trade is needed/wanted
|
Re: March WTB Sticky, Please Read Rules
WTB: Skunk2 Tuner 1 or Tuner 2 cams for B series.
|
Re: March WTB Sticky, Please Read Rules
wtb: bseries twin disk, scatter shield, and 3.9 DSS axles for eg/dc
|
Re: March WTB Sticky, Please Read Rules
wtb: DSS axles 2.9 bseries eg/dc
|
Re: March WTB Sticky, Please Read Rules
WTB: full race t4 twin scroll top mount for eg/delsol
1000cc injectors |
Re: March WTB Sticky, Please Read Rules
WTB: GSR Shift Linkage & EK Clutch Slave setup (from the rubber line forward - don't need the rubber line).
Found everything, thanks again Matt! |
Re: March WTB Sticky, Please Read Rules
WTB: DSS 5.9 Axles for 94+ Integra
|
Re: March WTB Sticky, Please Read Rules
WTB
1.Fuel System -10 feed -8/6 return. Full blown setup preferred. Full kit fuel rail to tank. 2.13x9 24.5x9x13 welds, lensos, bogarts 3.T1 Catchcan setup 4. Ek Callos Front End 5. Modified Gsr Transmission Pm/aim(jiggajdashockr) are preffered methods of contact |
Re: March WTB Sticky, Please Read Rules
WTB: LS block. Complete, no junk. I am using os pistons in the stock sleeves so it needs to be in good condition
|
Re: March WTB Sticky, Please Read Rules
WTB brand new clutch slave cylinder. OEM GSR Timing belt/ New ITR Oil Pump. I know some of you out there got these laying around. :P
|
Re: March WTB Sticky, Please Read Rules
WTB:
- GSR Spool, or LSD - B-series Scatter Sheild |
Re: March WTB Sticky, Please Read Rules
B Series scattersheild
|
Re: March WTB Sticky, Please Read Rules
wtb: 2inch INLET AND 2inch OUTLET magnaflow muffler
|
Re: March WTB Sticky, Please Read Rules
WTB: 44mm Tial Wastegate with Inlet V-band, Inlet Flange, Outlet V-Band,Outlet Flange
pm me |
Re: March WTB Sticky, Please Read Rules
wtb.. full race 4 inch downpipe for twin scroll top mount .
|
Re: March WTB Sticky, Please Read Rules
bought
|
Re: March WTB Sticky, Please Read Rules
WTB:Tilton/Competition Clutch B Series Twin Disk. BRAND NEW ONLY
|
Re: March WTB Sticky, Please Read Rules
WTB: pauter rods or manley turbo tuff rods for LS b18a/b engine.
|
Re: March WTB Sticky, Please Read Rules
wtb: gm 3 bar map sensor
|
Re: March WTB Sticky, Please Read Rules
WTB: B16 Head, fully built. LMK ASAP
|
Re: March WTB Sticky, Please Read Rules
Also looking for a B series scatter sheild!!
also looking for a GSR tranny, doesnt have to be mint going mfactory gears! |
Re: March WTB Sticky, Please Read Rules
wtb jdm itr tranny 4.7 fd
|
Re: March WTB Sticky, Please Read Rules
WTB: fullrace traction bars for eg
|
Re: March WTB Sticky, Please Read Rules
wtb: 23x8x13
and aftermarket H series fuel rail. |
All times are GMT -8. The time now is 08:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands