Insane Axles
#126
Honda-Tech Member
Join Date: Jul 2009
Location: Yucaipa, CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Insane Axles
Just wanted to bump this thread, yesterday @ IDRC I snapped insane shafts Half shaft also causing the axle to flop around and bust the CV apart, these are about 1 month old, car is all motor civic 254whp. I made around 10 passes yesterday. On our 2nd round into our class around 4:30pm snapped about 20 ft into the pass I was about to make! Maybe just a bad batch as I know much higher hp cars running these, hopefully they will warranty them for me! Attached are some photos also I am pulling the axles out of the car tonight, I'll post more photos.
Last edited by Vinnie909LSVTEC; 10-26-2015 at 05:03 PM.
#129
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2004
Location: Phoenix, AZ
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Re: Insane Axles
Just wanted to bump this thread, yesterday @ IDRC I snapped insane shafts Half shaft also causing the axle to flop around and bust the CV apart, these are about 1 month old, car is all motor civic 254whp. I made around 10 passes yesterday. On our 2nd round into our class around 4:30pm snapped about 20 ft into the pass I was about to make! Maybe just a bad batch as I know much higher hp cars running these, hopefully they will warranty them for me! Attached are some photos also I am pulling the axles out of the car tonight, I'll post more photos.
#131
Honda-Tech Member
Join Date: Jul 2009
Location: Yucaipa, CA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Insane Axles
Yes always, pre load is a must! I made around 10-15 passes on these, my stock auto zone axles had about 100 passes on them with no issues, I my self have never seen a half shaft snap
#132
Re: Insane Axles
[QUOTE=paulzy;38172642]okay. I'm in New Jersey and alot of us have heard of them. I have a set of 500hp insane shafts plus there intermediate shaft and I honestly like them alot. There customer support is awesome and they got the parts to me asap. Also, i have had them for about two years of hard street driving and they have held up great. This summer i will be testing them at the autocross track in my 04 ep3 with a full type r swap which was fully built by 4pistons from top to bottom. I will keep you updated
#133
Honda-Tech Member
iTrader: (1)
Re: Insane Axles
Mine had the dreaded B-series RH inner joint vibration right out of the box.
Finished rebuilding my Raxles shaft and re-installed, inner joint vibration gone.
Finished rebuilding my Raxles shaft and re-installed, inner joint vibration gone.
Thread
Thread Starter
Forum
Replies
Last Post