Exhaust valves for 1000+WHP
#1
Exhaust valves for 1000+WHP
Hello Guys, lately i have been having issues on the drag car bending exhaust valves even after one-two events, and I am curious what valves are you people using
on their high Hp cars 1000+ whp.
I have tried both the Ferrea Competition Plus valves and Supertech Inconel.
The only way they survive if i go very rich on the tune and hence reduce the egts temperatures but obviously power suffers.
on their high Hp cars 1000+ whp.
I have tried both the Ferrea Competition Plus valves and Supertech Inconel.
The only way they survive if i go very rich on the tune and hence reduce the egts temperatures but obviously power suffers.
#4
Honda-Tech Member
Join Date: Jan 2005
Location: Mississauga, ON, Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust valves for 1000+WHP
Are you shutting down as soon as your run is over? Not letting run for a bit after run... Or on the limiter too much?
#5
Re: Exhaust valves for 1000+WHP
No we actually go back to the pits with engine started so to let her cool slowly and i dont think she stays on the limiter much more than necessary.
I am sure that burnout and launch does not help the situation!!!
What sort of EGTs are you running on top end .......and sorry i forgot to mention that i am on E85R fuel
I am sure that burnout and launch does not help the situation!!!
What sort of EGTs are you running on top end .......and sorry i forgot to mention that i am on E85R fuel
#6
Honda-Tech Member
Re: Exhaust valves for 1000+WHP
Its been so long that i can't remember if mine are 6000's or comp plus. I think i run comp plus ferrea on the exhaust and 6000 on the intake. I also ceramic coat them through Coatings M.D.
#7
Honda-Tech Member
Join Date: Jun 2008
Location: Hesperia, CA, USA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust valves for 1000+WHP
We have been running the Ferrea Comp Plus valves with no issues (K20 engine). No EGT sensors, but we target 12.0:1-11.8:1 AFRs at WOT. Pump E85, 42 psi, over 1000hp, best pass yet 8.93@167.
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2002
Location: Sin City
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust valves for 1000+WHP
Hello Guys, lately i have been having issues on the drag car bending exhaust valves even after one-two events, and I am curious what valves are you people using
on their high Hp cars 1000+ whp.
I have tried both the Ferrea Competition Plus valves and Supertech Inconel.
The only way they survive if i go very rich on the tune and hence reduce the egts temperatures but obviously power suffers.
on their high Hp cars 1000+ whp.
I have tried both the Ferrea Competition Plus valves and Supertech Inconel.
The only way they survive if i go very rich on the tune and hence reduce the egts temperatures but obviously power suffers.
Thread
Thread Starter
Forum
Replies
Last Post
fastludeh22
Forced Induction
3
09-25-2002 06:58 AM