FS: Turbonetics Turbo. Dual Ball Bearing. Freshly rebuilt
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 1,060
Likes: 0
Received 0 Likes
on
0 Posts
FS: Turbonetics Turbo. Dual Ball Bearing. Freshly rebuilt
I have a Turbonetics turbo that I purchased from a friend and intended to use on my personal car. Plans have changed and I am selling it. It has no issues, no shaft play and is in good condition. The turbo is oil and water cooled and I have all the hard lines that will be included with the sale.
I will post up pictures later with castings and proof of condition.
Price is $450 OBO
The ceramic dual ball bearing option was $300 extra at the time of purchase (when my friend bought it).
I will post up pictures later with castings and proof of condition.
Price is $450 OBO
The ceramic dual ball bearing option was $300 extra at the time of purchase (when my friend bought it).
Last edited by Mr. EG; 02-23-2013 at 08:07 AM.
Trending Topics
#13
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 1,060
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Turbonetics Turbo. Dual Ball Bearing. Freshly rebuilt
I don't know the flow rating, but from my research it can safely make over 400 hp. The specs are listed above if that helps.
Here is a thread that may help also https://honda-tech.com/forums/forced-induction-16/turbonetics-t3-t4-50trim-max-hp-rating-3081939/
Here is a thread that may help also https://honda-tech.com/forums/forced-induction-16/turbonetics-t3-t4-50trim-max-hp-rating-3081939/