FS: [Testing Waters] Greddy CARB Plaque
#1
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Greddy CARB E.O. Plaque™
<FONT SIZE="5">OLD THREAD SO PLEASE DON'T REPLY OR BUMP!!!</FONT>
****I NO LONGER MAKE THE PLEXIGLASS, JUST THE LABELS!!****
*main thread was shut down --- I've sold hundreds and have vouches available*
<FONT COLOR="darkblue"><FONT SIZE="6">GREDDY CARB E.O. PLAQUES™</FONT></FONT>
Custom work, any size, any type...
I do it all at your own request. OVER 250+ plaques sold!!!
NEWS (4/15/07): As reported by a user, saveacivic (from OC, CA) claims that my product has saved him from numerous tickets!!
Update (7/24/07) - I only have a couple of plexiglass left but they are not an exact fit of the label(s). I wont be fabbing any more plexi to cover the main label so get them now (discount available for those plexis!!)
Update (1/30/08) - I am still making these! Just recently sent out a batch! However, the plexi that accommodates the labels has been discontinued. The only thing still in production are the labels!
Update (10/16/08) - I am still making these! The plexi that accommodates the labels has been discontinued. The only thing still in production are the labels!
-------------------------------------------------------------------------------------------------
<FONT SIZE="5"><FONT COLOR="blue">[PLAQUE INFO]</FONT></FONT>
<FONT SIZE="3"> - Measurements: 3.75"</FONT> <FONT SIZE="2">+/- .01"</FONT> <FONT SIZE="3">x 2.25"</FONT> <FONT SIZE="2">+/- .01"</FONT>
---- Can be customized to suit your needs.
- 1/8" Clear Plexiglass covering the main label (OUT OF STOCK)
- [b]Water resistant ink
**These are waterproof, soap-washable, heat resistant-
safe for me to say that the original in my car is still intact
after more than 2 years**
FAQ
Q: The originals are much smaller, why are yours so big?
A: They are big because of one reason only. To attract attention. For example when
a person pops your hood to look at your engine bay, what is the first thing they will
LIKELY notice? That's right...The plaques. Then they assume you have a Greddy Kit.
And you nod with them of course
Q: Do they actually work?
A: saveacivic (from OC, CA) reported back to me that my product has saved him from numerous tickets!!!
-------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------
<FONT SIZE="5"><FONT COLOR="blue">[PRICES w/SHIPPING]</FONT></FONT><FONT SIZE="2">
- $----NOT AVAILABLE---- with one (1) plexiglass (PLEXIGLASS OUT OF STOCK!!)</FONT>
- <FONT SIZE="4">$20.91</FONT>/each without the plexiglass
---- <FONT SIZE="2">Prices include the Intercooler label</FONT>
- <FONT SIZE="2">Shipping via USPS.</FONT>
- Price includes PayPal fee!
- NO PICKUPS!
<FONT SIZE="4"><FONT COLOR="green">Intercooler CARB label is INCLUDED, free of charge.</FONT></FONT>
<FONT COLOR="darkblue"><FONT SIZE="2">Note:</FONT></FONT> The intercooler label has no plexiglass. However, it can be easily
made into a sticker, but you must use doublesided scotch sticky tape,
adhesive spray or some sort of glue to be able to mount these, where ever
you mount them.
-------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------
<FONT SIZE="5"><FONT COLOR="blue">[PLEASE SEND PAYPAL PAYMENTS TO]</FONT></FONT>
<FONT SIZE="3">dntbejockn@hotmail.com</FONT>
Or inquire if sending MO.
<FONT SIZE="3">Also, please include the following information:</FONT>
1) HT Screenname
2) Which car is the plaque for? Custom size?
-------------------------------------------------------------------------------------------------
<FONT SIZE="3">If you want a customized size, non-replacement label or just
want the label without the plexiglass, etc, I can do it for you!!</FONT>
***CUSTOM PLAQUES AVAILABLE!!!*** PM for details.
Any additional questions, please contact me.
<FONT SIZE="3">[NEW PICTURES]</FONT>
10/6/04 -- REVISED FINAL LABEL
Pictures may be blurry since my digital camera isn't all that great.
I promise you, quality is 100x better in person!!!!
Intercooler label, included free!
1/8" Thick Plexiglass that covers the main label. (OUT OF STOCK!)
<FONT SIZE="3">Installed Pictures</FONT>
Customer pics..
NOTE: This was a rushed, quick, sloppy install in the night
This was the older first *UNREVISED* label...unreleased.
This is how it mounts onto the chassis, just before the radiator.
I used pre-existing holes and tapped into them. I will replace the
screws with rivets for a more authentic look. Can't even tell that
the plexiglass is covering it .
Flashlight on it...to simulate what the cops will see at night.
Overview of the engine bay with the plaque...
--------------------------------------------------------------------
[FURTHER DESCRIPTION]
Greddy CARB "Plaques", not sticker. They are suppose to mount onto your chassis using rivets or screws, just before the radiator (see pictures above). In my car (95 Integra), there are two existing holes I tapped into.
The numbers are correct and the CARB# should run clean. The only thing is, I want to be able to fool the cops into thinking it is the real deal.
A 1/8" plexiglass that is machined cut goes over the main Turbo kit label.
It measures approx:
3.75" +/- .01" x 2.25" +/- .01"
Here are the pictures with descriptions:
This was the older first *UNREVISED* label...unreleased.
It looks blurry because theres still blue film on the plexiglass on both sides.
Here you can see the 2 sides of film unfolded. The view is clear now.
Closer look...
One last shot.
CHEERS
- NightRiderS2k
****I NO LONGER MAKE THE PLEXIGLASS, JUST THE LABELS!!****
*main thread was shut down --- I've sold hundreds and have vouches available*
<FONT COLOR="darkblue"><FONT SIZE="6">GREDDY CARB E.O. PLAQUES™</FONT></FONT>
Custom work, any size, any type...
I do it all at your own request. OVER 250+ plaques sold!!!
NEWS (4/15/07): As reported by a user, saveacivic (from OC, CA) claims that my product has saved him from numerous tickets!!
Update (7/24/07) - I only have a couple of plexiglass left but they are not an exact fit of the label(s). I wont be fabbing any more plexi to cover the main label so get them now (discount available for those plexis!!)
Update (1/30/08) - I am still making these! Just recently sent out a batch! However, the plexi that accommodates the labels has been discontinued. The only thing still in production are the labels!
Update (10/16/08) - I am still making these! The plexi that accommodates the labels has been discontinued. The only thing still in production are the labels!
-------------------------------------------------------------------------------------------------
<FONT SIZE="5"><FONT COLOR="blue">[PLAQUE INFO]</FONT></FONT>
<FONT SIZE="3"> - Measurements: 3.75"</FONT> <FONT SIZE="2">+/- .01"</FONT> <FONT SIZE="3">x 2.25"</FONT> <FONT SIZE="2">+/- .01"</FONT>
---- Can be customized to suit your needs.
- 1/8" Clear Plexiglass covering the main label (OUT OF STOCK)
- [b]Water resistant ink
**These are waterproof, soap-washable, heat resistant-
safe for me to say that the original in my car is still intact
after more than 2 years**
FAQ
Q: The originals are much smaller, why are yours so big?
A: They are big because of one reason only. To attract attention. For example when
a person pops your hood to look at your engine bay, what is the first thing they will
LIKELY notice? That's right...The plaques. Then they assume you have a Greddy Kit.
And you nod with them of course
Q: Do they actually work?
A: saveacivic (from OC, CA) reported back to me that my product has saved him from numerous tickets!!!
-------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------
<FONT SIZE="5"><FONT COLOR="blue">[PRICES w/SHIPPING]</FONT></FONT><FONT SIZE="2">
- $----NOT AVAILABLE---- with one (1) plexiglass (PLEXIGLASS OUT OF STOCK!!)</FONT>
- <FONT SIZE="4">$20.91</FONT>/each without the plexiglass
---- <FONT SIZE="2">Prices include the Intercooler label</FONT>
- <FONT SIZE="2">Shipping via USPS.</FONT>
- Price includes PayPal fee!
- NO PICKUPS!
<FONT SIZE="4"><FONT COLOR="green">Intercooler CARB label is INCLUDED, free of charge.</FONT></FONT>
<FONT COLOR="darkblue"><FONT SIZE="2">Note:</FONT></FONT> The intercooler label has no plexiglass. However, it can be easily
made into a sticker, but you must use doublesided scotch sticky tape,
adhesive spray or some sort of glue to be able to mount these, where ever
you mount them.
-------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------
<FONT SIZE="5"><FONT COLOR="blue">[PLEASE SEND PAYPAL PAYMENTS TO]</FONT></FONT>
<FONT SIZE="3">dntbejockn@hotmail.com</FONT>
Or inquire if sending MO.
<FONT SIZE="3">Also, please include the following information:</FONT>
1) HT Screenname
2) Which car is the plaque for? Custom size?
-------------------------------------------------------------------------------------------------
<FONT SIZE="3">If you want a customized size, non-replacement label or just
want the label without the plexiglass, etc, I can do it for you!!</FONT>
***CUSTOM PLAQUES AVAILABLE!!!*** PM for details.
Any additional questions, please contact me.
<FONT SIZE="3">[NEW PICTURES]</FONT>
10/6/04 -- REVISED FINAL LABEL
Pictures may be blurry since my digital camera isn't all that great.
I promise you, quality is 100x better in person!!!!
Intercooler label, included free!
1/8" Thick Plexiglass that covers the main label. (OUT OF STOCK!)
<FONT SIZE="3">Installed Pictures</FONT>
Customer pics..
NOTE: This was a rushed, quick, sloppy install in the night
This was the older first *UNREVISED* label...unreleased.
This is how it mounts onto the chassis, just before the radiator.
I used pre-existing holes and tapped into them. I will replace the
screws with rivets for a more authentic look. Can't even tell that
the plexiglass is covering it .
Flashlight on it...to simulate what the cops will see at night.
Overview of the engine bay with the plaque...
--------------------------------------------------------------------
[FURTHER DESCRIPTION]
Greddy CARB "Plaques", not sticker. They are suppose to mount onto your chassis using rivets or screws, just before the radiator (see pictures above). In my car (95 Integra), there are two existing holes I tapped into.
The numbers are correct and the CARB# should run clean. The only thing is, I want to be able to fool the cops into thinking it is the real deal.
A 1/8" plexiglass that is machined cut goes over the main Turbo kit label.
It measures approx:
3.75" +/- .01" x 2.25" +/- .01"
Here are the pictures with descriptions:
This was the older first *UNREVISED* label...unreleased.
It looks blurry because theres still blue film on the plexiglass on both sides.
Here you can see the 2 sides of film unfolded. The view is clear now.
Closer look...
One last shot.
CHEERS
- NightRiderS2k
Last edited by NightRiderS2K; 09-03-2009 at 08:07 AM.
#2
Re: FS: [Testing Waters] Greddy CARB Plaque (NightRider-gsR)
From what i see those look extremely good. Exceelent work. Are you thinking of making and selling them? If so i might be interested. I see people wanting them on this site. Good work!
#3
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: [Testing Waters] Greddy CARB Plaque (NightRider-gsR)
I can make these for mostly any car.
But the ones listed below are the ones Greddy made a kit for.
HON CIVIC EX 92-00
HON CIVIC SI 99-00
HON Prelude (nonSH) 97-99
HON CIVIC SI 02
ACU RSX Type S 02
ACU INTEGRA GSR 96-99
ACU INTEGRA LS/RS 96-00
NIS 240SX 96-98
NIS 350Z (6MT) 03
NIS G35 Coupe (6MT) 03
MAZ MIATA 1.6l 89-93
But the ones listed below are the ones Greddy made a kit for.
HON CIVIC EX 92-00
HON CIVIC SI 99-00
HON Prelude (nonSH) 97-99
HON CIVIC SI 02
ACU RSX Type S 02
ACU INTEGRA GSR 96-99
ACU INTEGRA LS/RS 96-00
NIS 240SX 96-98
NIS 350Z (6MT) 03
NIS G35 Coupe (6MT) 03
MAZ MIATA 1.6l 89-93
#5
Honda-Tech Member
Join Date: May 2001
Location: Slo.cal/Yokohama
Posts: 459
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: [Testing Waters] Greddy CARB Plaque (NightRider-gsR)
very slick... i have the greddy sticker, and it saved my *** a few times. stupid pigs wont know the diff
#6
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: [Testing Waters] Greddy CARB Plaque (Autobacs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Autobacs »</TD></TR><TR><TD CLASS="quote">very slick... i have the greddy sticker, and it saved my *** a few times. stupid pigs wont know the diff</TD></TR></TABLE>
That's a good sign...
...SO far.
If it does go into production, I don't know a reasonable price.
It takes me approx 2-2.5 hours (from scratch) to make a really nice one like in the pics above.
Thanks for the positive responses!!
That's a good sign...
...SO far.
If it does go into production, I don't know a reasonable price.
It takes me approx 2-2.5 hours (from scratch) to make a really nice one like in the pics above.
Thanks for the positive responses!!
#7
Honda-Tech Member
Join Date: Jun 2004
Location: Sherman Oaks, CA, United States
Posts: 7,539
Likes: 0
Received 4 Likes
on
4 Posts
Re: FS: [Testing Waters] Greddy CARB Plaque (NightRider-gsR)
Not that I think the cops will know, but you might want to print up one for your intercooler too, just use the CARB # from the civic intercooler kit. (I'm assuming you ahve an intercooler on a custom turbo kit.)
Trending Topics
#8
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: [Testing Waters] Greddy CARB Plaque (TunerN00b)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TunerN00b »</TD></TR><TR><TD CLASS="quote">Not that I think the cops will know, but you might want to print up one for your intercooler too, just use the CARB # from the civic intercooler kit. (I'm assuming you ahve an intercooler on a custom turbo kit.)</TD></TR></TABLE>
I don't find it necessary for the intercooler kit...
Why because it's not like cops will know what came with the Greddy kit.
For instance, here's what makes my setup illegal.
Intercooler, blow off valve, wastegate, dumptube, cutout (hidden). The plaque is designed to be placed on your chassis just above the radiator.
I will mass produce these once I get a fitment on my car.
But I mean, if people really want them, then I can custom make one. I don't even know where the sticker is found on the real greddy turbo kits. If I don't know, how would cops know?
NRg
I don't find it necessary for the intercooler kit...
Why because it's not like cops will know what came with the Greddy kit.
For instance, here's what makes my setup illegal.
Intercooler, blow off valve, wastegate, dumptube, cutout (hidden). The plaque is designed to be placed on your chassis just above the radiator.
I will mass produce these once I get a fitment on my car.
But I mean, if people really want them, then I can custom make one. I don't even know where the sticker is found on the real greddy turbo kits. If I don't know, how would cops know?
NRg
#11
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skt »</TD></TR><TR><TD CLASS="quote">prices shipped/picked up?</TD></TR></TABLE>
Prices on the top...shipped.
Official FOR SALE thread coming soon!!
CHEERS
Thanks for all the support!
Prices on the top...shipped.
Official FOR SALE thread coming soon!!
CHEERS
Thanks for all the support!
#14
Honda-Tech Member
Join Date: Sep 2000
Location: ATL
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Re: (simpleaznx)
Not to steal the thunder but you guys too impatient to wait for nice ones? Alot of you guys replying to these threads already said you were in on the one I had posted.
If you want wants printed on paper and mounted to plexi-by all means go for it.
If you want something nice, I have the ticket.
NightRider-gsR: And just so no hard feelings are felt, i had a 15 page thread that got deleted a few weeks ago, so I had a little bit of a jump on ya
Mine will be here tommorow at which time I will post pictures of them.
If you want wants printed on paper and mounted to plexi-by all means go for it.
If you want something nice, I have the ticket.
NightRider-gsR: And just so no hard feelings are felt, i had a 15 page thread that got deleted a few weeks ago, so I had a little bit of a jump on ya
Mine will be here tommorow at which time I will post pictures of them.
#15
Re: (stizzit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stizzit »</TD></TR><TR><TD CLASS="quote">Not to steal the thunder but you guys too impatient to wait for nice ones? Alot of you guys replying to these threads already said you were in on the one I had posted.
If you want wants printed on paper and mounted to plexi-by all means go for it.
If you want something nice, I have the ticket.
NightRider-gsR: And just so no hard feelings are felt, i had a 15 page thread that got deleted a few weeks ago, so I had a little bit of a jump on ya
Mine will be here tommorow at which time I will post pictures of them.
</TD></TR></TABLE>
i'm with this guy.
If you want wants printed on paper and mounted to plexi-by all means go for it.
If you want something nice, I have the ticket.
NightRider-gsR: And just so no hard feelings are felt, i had a 15 page thread that got deleted a few weeks ago, so I had a little bit of a jump on ya
Mine will be here tommorow at which time I will post pictures of them.
</TD></TR></TABLE>
i'm with this guy.
#16
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: (stizzit)
I saw your thread, I was interested. I still am. I want both my plaque and stickers if you can provide me with one. I'm paranoid as hell.
I had a thread waaaaaaay before you that got locked [Integra forum], but it wasn't a plexiglass thread like this one. The means of a plexiglass is for extra protection and make it look more genuine.
Its LASER printed by Sony on photo paper. The ink is waterproof... you can even clean the whole thing with HOT WATER and soap. Only thing that will destroy this is, if you burn it.
And no hard feelings either.
NRg
I had a thread waaaaaaay before you that got locked [Integra forum], but it wasn't a plexiglass thread like this one. The means of a plexiglass is for extra protection and make it look more genuine.
Its LASER printed by Sony on photo paper. The ink is waterproof... you can even clean the whole thing with HOT WATER and soap. Only thing that will destroy this is, if you burn it.
And no hard feelings either.
NRg
#20
Honda-Tech Member
Join Date: Apr 2003
Location: bay area
Posts: 5,194
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ozzyman)
count me in. also, is there a carb number for the 92 cx?
i mean, everything has to match, and the cop will know that i'm not driving an ex/si through the vin.... lmk
i mean, everything has to match, and the cop will know that i'm not driving an ex/si through the vin.... lmk
#21
Re: FS: [Testing Waters] Greddy CARB Plaque (NightRider-gsR)
i want one that looks authentic...... but i have a honda accord.... anyone know if there is carb numbers for these cars? If not, do the cops really check the carb number, if anyone has ever had to pop there hood, please answer. If they dont then hell, can you just make one that says honda accord turbo kit with a prelude carb number?
#23
In-N-Out Burger
Thread Starter
Join Date: Apr 2003
Location: 1320ft OC LA, XX, USA
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: [Testing Waters] Greddy CARB Plaque (Split Image Prez)
Like I mentioned:
Greddy only made a Turbo Bolt on Kit for the following cars:
HON CIVIC EX 92-00
HON CIVIC SI 99-00
HON Prelude (nonSH) 97-99
HON CIVIC SI 02
ACU RSX Type S 02
ACU INTEGRA GSR 96-99
ACU INTEGRA LS/RS 96-00
NIS 240SX 96-98
NIS 350Z (6MT) 03
NIS G35 Coupe (6MT) 03
MAZ MIATA 1.6l 89-93
NOTE: I can make the "plaque" for any car not mentioned above also. The CARB EO# will still pass, but the part number will be made up. I'm pretty sure the cops will still be fooled, unless and only unless THEY REALLY KNOW what they are doing and can spot the differences and such.
Example: The plaque posted above is for my 95 GSR in which Greddy did not make a kit for...although I will still use it and hopefully if I ever do get pulled over, the pig will think its real.
OFFICIAL THREAD WILL BE POSTED UP SOON.
PRODUCTION DATE: 10/1/04
First 10 orders "Intro price": $Undisclosed
Thanks!! --
NRG
Greddy only made a Turbo Bolt on Kit for the following cars:
HON CIVIC EX 92-00
HON CIVIC SI 99-00
HON Prelude (nonSH) 97-99
HON CIVIC SI 02
ACU RSX Type S 02
ACU INTEGRA GSR 96-99
ACU INTEGRA LS/RS 96-00
NIS 240SX 96-98
NIS 350Z (6MT) 03
NIS G35 Coupe (6MT) 03
MAZ MIATA 1.6l 89-93
NOTE: I can make the "plaque" for any car not mentioned above also. The CARB EO# will still pass, but the part number will be made up. I'm pretty sure the cops will still be fooled, unless and only unless THEY REALLY KNOW what they are doing and can spot the differences and such.
Example: The plaque posted above is for my 95 GSR in which Greddy did not make a kit for...although I will still use it and hopefully if I ever do get pulled over, the pig will think its real.
OFFICIAL THREAD WILL BE POSTED UP SOON.
PRODUCTION DATE: 10/1/04
First 10 orders "Intro price": $Undisclosed
Thanks!! --
NRG