bergercurtis

Hello,

After my ED6/EF hatch was stolen, I still have a number of parts that never made their way into the car.

Synchrotech L3 transmission - Si ratio/final drive, carbon lined synchros, MFactory LSD, all assembled by Synchrotech, BNIB
Go-Autoworks D-Series ram horn manifold combo - T3 4 bolt flange, 38mm 2 bolt EWG, 5 bolt downpipe with 2 O2 (O2/Wideband) ports, 38mm EWG dump tube down pipe
Rebuilt D16Z6 head, stock cam, 3 angle valve job, new seals
AEM digital/analog wideband gauge
Skunk2 D-Series intake manifold and throttle body with BWR 3 bar MAP sensor, RC750cc injectors
EG slim radiator and fan
Walbro 255 EF/CRX fuel pump kit
D16Z6 timing belt components kit (water pump, timing belt, timing belt tensioner)

Make an offer, worst I can do is say no. PayPal, Venmo, or cash in hand local pick up available from Allentown, PA.

I can ship anything as well from my job- UPS and shipped the following day after receiving payment.

__________________________________________________ ______________________________________

Most of the larger components are SOLD. Here is what I have left:

Skunk2 68mm Alpha B/D/H/F throttle body
BWR 3 BAR map sensor
4x RC 750cc injectors
Rebuilt fresh D16Z6 head
EG slim radiator and fan
D16 timing belt component kit (tensioner, belt, waterpump)
Some Moog suspension components for an EF/CRX Civic
Odds and ends from an eBay turbo kit that I doubt many people would want but it's there for someones cheap budget (intercooler piping for an EF, etc.)
CX Racing D-series cast manifold T3/T4 (both bolt patterns)

bergercurtis

bergercurtis

Replied to PM's, thanks! All still for sale but some inquiries made.

bergercurtis

Bump, let's see some offers

DaX

iTrader: (1)

Is the manifold / DP / dump tube one of their AC compatible ones?

bergercurtis

Not completely sure, my EF had neither. Bolt on, it could be.. But you could always reroute to make it work with some welding.

bergercurtis

Invoice and packet I received with the transmission.

bergercurtis

bergercurtis

Trans sold, still have much of the rest

Driftins12

Pm'd!

linkdeezie

BUMP - Unfortunate that the EF was stolen..damn thieves

ckrs_civic

iTrader: (4)

bergercurtis

Thanks. Still have a bunch of this. PMs replied.

89hybrid

bergercurtis

Pretty much everything pictured minus the transmission.

Joel Tortosa

Injectors high impedence? If so how much

cityofcaterpillars

pm'd

CarGuy75

iTrader: (4)

Price on the AEM 30-4110 kit shipped to 38654?

silver97coupe

bergercurtis

bergercurtis

Intake manifold sold. I still have the RC 750s and throttle body from it with a BWR 3 BAR map sensor. Pending full exhaust manifold down pipe and dump tube sale with AEM guage and Walbro fuel pump.

bergercurtis

Here is what I have left as of today (28 Jan 19)

Skunk2 68mm Alpha B/D/H/F throttle body
BWR 3 BAR map sensor
4x RC 750cc injectors
Rebuilt fresh D16Z6 head
EG slim radiator and fan
D16 timing belt component kit (tensioner, belt, waterpump)
Some Moog suspension components for an EF/CRX Civic (ball joints, tie rod ends, etc.)
Odds and ends from an eBay turbo kit that I doubt many people would want but it's there for someones cheap budget (intercooler piping for an EF, etc.)
CX Racing D-series cast manifold T3/T4 (both bolt patterns)

CarGuy75

iTrader: (4)

Still have BWR 3 BAR map sensor?

bergercurtis

Yes I do.

vtakdis