D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Hello,
After my ED6/EF hatch was stolen, I still have a number of parts that never made their way into the car. Synchrotech L3 transmission - Si ratio/final drive, carbon lined synchros, MFactory LSD, all assembled by Synchrotech, BNIB Go-Autoworks D-Series ram horn manifold combo - T3 4 bolt flange, 38mm 2 bolt EWG, 5 bolt downpipe with 2 O2 (O2/Wideband) ports, 38mm EWG dump tube down pipe Rebuilt D16Z6 head, stock cam, 3 angle valve job, new seals AEM digital/analog wideband gauge Skunk2 D-Series intake manifold and throttle body with BWR 3 bar MAP sensor, RC750cc injectors EG slim radiator and fan Walbro 255 EF/CRX fuel pump kit D16Z6 timing belt components kit (water pump, timing belt, timing belt tensioner) Make an offer, worst I can do is say no. PayPal, Venmo, or cash in hand local pick up available from Allentown, PA. I can ship anything as well from my job- UPS and shipped the following day after receiving payment. __________________________________________________ ______________________________________ Most of the larger components are SOLD. Here is what I have left: Skunk2 68mm Alpha B/D/H/F throttle body BWR 3 BAR map sensor 4x RC 750cc injectors Rebuilt fresh D16Z6 head EG slim radiator and fan D16 timing belt component kit (tensioner, belt, waterpump) Some Moog suspension components for an EF/CRX Civic Odds and ends from an eBay turbo kit that I doubt many people would want but it's there for someones cheap budget (intercooler piping for an EF, etc.) CX Racing D-series cast manifold T3/T4 (both bolt patterns) |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
https://cimg3.ibsrv.net/gimg/honda-t...a1d44c2e71.jpg
https://cimg4.ibsrv.net/gimg/honda-t...94f5c75887.jpg https://cimg5.ibsrv.net/gimg/honda-t...ede4a645f6.jpg https://cimg6.ibsrv.net/gimg/honda-t...879f8469e9.jpg https://cimg7.ibsrv.net/gimg/honda-t...dda6ddab6b.jpg https://cimg8.ibsrv.net/gimg/honda-t...478e187ef7.jpg https://cimg9.ibsrv.net/gimg/honda-t...403e994a3e.jpg https://cimg0.ibsrv.net/gimg/honda-t...792b0909bf.jpg |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Replied to PM's, thanks! All still for sale but some inquiries made.
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Bump, let's see some offers
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Is the manifold / DP / dump tube one of their AC compatible ones?
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Not completely sure, my EF had neither. Bolt on, it could be.. But you could always reroute to make it work with some welding.
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Invoice and packet I received with the transmission.
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Trans sold, still have much of the rest
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Pm'd!
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
BUMP - Unfortunate that the EF was stolen..damn thieves
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Bump for a decent amount of parts !! |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Thanks. Still have a bunch of this. PMs replied.
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
What parts do you you have still ? |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Pretty much everything pictured minus the transmission.
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Injectors high impedence? If so how much
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
pm'd
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Price on the AEM 30-4110 kit shipped to 38654?
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Would you sell just the manifold? If so how much you looking for it? |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
@Superhatch @cityofcaterpillars are you guys ready to buy today? I'm free all day today and tomorrow to ship your stuff out. |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Intake manifold sold. I still have the RC 750s and throttle body from it with a BWR 3 BAR map sensor. Pending full exhaust manifold down pipe and dump tube sale with AEM guage and Walbro fuel pump.
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Here is what I have left as of today (28 Jan 19)
Skunk2 68mm Alpha B/D/H/F throttle body BWR 3 BAR map sensor 4x RC 750cc injectors Rebuilt fresh D16Z6 head EG slim radiator and fan D16 timing belt component kit (tensioner, belt, waterpump) Some Moog suspension components for an EF/CRX Civic (ball joints, tie rod ends, etc.) Odds and ends from an eBay turbo kit that I doubt many people would want but it's there for someones cheap budget (intercooler piping for an EF, etc.) CX Racing D-series cast manifold T3/T4 (both bolt patterns) |
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Still have BWR 3 BAR map sensor?
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Originally Posted by CarGuy75
(Post 51865266)
Still have BWR 3 BAR map sensor?
|
Re: D-Series turbo components CRX/EF Synchrotech, MFactory, Skunk2, RC, Go-Autoworks
Price on the map sensor? |
All times are GMT -8. The time now is 06:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands