Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley etc
03-18-2009, 07:08 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley etc
***EDIT: SOLD! ***
For sale: my entire JRSC setup from my autocross car... this was never used for track days, just two seasons of autox, plus one visit to Bandimere, and some light-duty commuting. It was on a '94 Integra GSR motor (B18C1).
Everything is in excellent condition... no stripped bolts/threads, nothing's cracked/rewelded, etc.
All you'll need to run it on a B18C1-powered car to duplicate my setup is a Walbro 255lph fuel pump ($90 new, or under $40 used), a couple hoses, and maybe some dyno time to make sure your A/F and timing is safe.
The JRSC kit alone is $2500:
http://www.supercharger.com/Shop/Vie...eIndexID=33372
- and you'll see all the extras I'm including (RC Engineering injectors, CRV/B20 OEM crank pulley for more boost, custom-mapped, reprogrammable Phearable.net P28 ECU, $80+ worth of new Goodyear Gatorback belts instead of the crap Jackson includes with the kit, Power Rev Racing intake manifold gasket/spacer, etc).
PRICE: $1500 + shipping (this stuff is heavy and bulky, so expect $35-40 depending on where you are).
CONTACT: hsunchen@hotmail dot com
Pricing comparison: http://hondamarketplace.com/showthread.php?t=2498682
Includes:
95% complete Jackson Racing supercharger kit with two sets of instructions (the original ones from Jackson, plus a pictorial version from C-speed). I left some of the rubber coolant hoses on my car since it was going to be a hassle to pull them, and the next owner would probably want to get new hoses just to be on the safe side anyway.
The supercharger itself was recently completely overhauled/rebuilt by The High Speed Lab (www.thehighspeedlab.com) with a Viton high-pressure nose drie seal, as well as having the drive coupling and timing gears replaced. This rebuild cost was $548.25. I can fax you this receipt if you'd like to see it.
I'd estimate the supercharger now has about 2,000 miles of use on it, at the most... the rebuild was done in late Dec. '07 (the receipt from The High Speed Lab is dated 12/31/07) but the car was not autoxed/driven hard after early May of '08... and the kit was pulled from the car several months ago.
Instead of the hokey rising-rate fuel pressure regulator Jackson provides, I used a custom-mapped Phearable.net-modified OEM P28 ECU ($175 + shipping):
http://www.phearable.net/shoppingcar...vtec-p-31.html
- and RC Engineering 440cc/min injectors ($300/set) to achieve excellent power and torque (dyno results by Tobi shown below).
I also obtained a Honda CRV B20 crank pulley to achieve more boost ($30), and upgraded all of the belts to Goodyear Gatorbacks... they are way more durable than the belts Jackson includes (and more $$$ - the buyer will receive two spares of EACH belt).
I created a custom washer to go behind this crank pulley to achieve perfect alignment with the supercharger/alternator - this is critical to avoid tearing through belts on a regular basis.
I also used a P2R phenolic intake manifold gasket to reduce the effects of heatsoak for more consistent power production:
http://www.powerrevracing.com/intakegaskets.html
That part will be included too ($35 by itself).
I'll also include a custom-made throttle body MAP sensor blockoff plate you'll need, and an admittedly-hokey-looking throttle cable bracket (which worked just fine for over two years, and passed multiple tech inspections, thankyouverymuch).
This setup made enough power to almost keep up with a certain very-well-prepped supercharged E36 BMW in SM class... if only I could have driven the EGbeater better.
It dynoed 216whp/163wtq (done on a Dynapack, not optimistic Dynojet figures), with very conservative ignition and fuel settings to keep it safe under hot summer conditions.
I've also got receipts for $300 worth of new parts from Moss Motors (the authorized distributor of Jackson SC parts)... just so you know that I didn't use a bunch of used, tired parts when I installed this setup on my car in late-summer '07:
For sale: my entire JRSC setup from my autocross car... this was never used for track days, just two seasons of autox, plus one visit to Bandimere, and some light-duty commuting. It was on a '94 Integra GSR motor (B18C1).
Everything is in excellent condition... no stripped bolts/threads, nothing's cracked/rewelded, etc.
All you'll need to run it on a B18C1-powered car to duplicate my setup is a Walbro 255lph fuel pump ($90 new, or under $40 used), a couple hoses, and maybe some dyno time to make sure your A/F and timing is safe.
The JRSC kit alone is $2500:
http://www.supercharger.com/Shop/Vie...eIndexID=33372
- and you'll see all the extras I'm including (RC Engineering injectors, CRV/B20 OEM crank pulley for more boost, custom-mapped, reprogrammable Phearable.net P28 ECU, $80+ worth of new Goodyear Gatorback belts instead of the crap Jackson includes with the kit, Power Rev Racing intake manifold gasket/spacer, etc).
PRICE: $1500 + shipping (this stuff is heavy and bulky, so expect $35-40 depending on where you are).
CONTACT: hsunchen@hotmail dot com
Pricing comparison: http://hondamarketplace.com/showthread.php?t=2498682
Includes:
95% complete Jackson Racing supercharger kit with two sets of instructions (the original ones from Jackson, plus a pictorial version from C-speed). I left some of the rubber coolant hoses on my car since it was going to be a hassle to pull them, and the next owner would probably want to get new hoses just to be on the safe side anyway.
The supercharger itself was recently completely overhauled/rebuilt by The High Speed Lab (www.thehighspeedlab.com) with a Viton high-pressure nose drie seal, as well as having the drive coupling and timing gears replaced. This rebuild cost was $548.25. I can fax you this receipt if you'd like to see it.
I'd estimate the supercharger now has about 2,000 miles of use on it, at the most... the rebuild was done in late Dec. '07 (the receipt from The High Speed Lab is dated 12/31/07) but the car was not autoxed/driven hard after early May of '08... and the kit was pulled from the car several months ago.
Instead of the hokey rising-rate fuel pressure regulator Jackson provides, I used a custom-mapped Phearable.net-modified OEM P28 ECU ($175 + shipping):
http://www.phearable.net/shoppingcar...vtec-p-31.html
- and RC Engineering 440cc/min injectors ($300/set) to achieve excellent power and torque (dyno results by Tobi shown below).
I also obtained a Honda CRV B20 crank pulley to achieve more boost ($30), and upgraded all of the belts to Goodyear Gatorbacks... they are way more durable than the belts Jackson includes (and more $$$ - the buyer will receive two spares of EACH belt).
I created a custom washer to go behind this crank pulley to achieve perfect alignment with the supercharger/alternator - this is critical to avoid tearing through belts on a regular basis.
I also used a P2R phenolic intake manifold gasket to reduce the effects of heatsoak for more consistent power production:
http://www.powerrevracing.com/intakegaskets.html
That part will be included too ($35 by itself).
I'll also include a custom-made throttle body MAP sensor blockoff plate you'll need, and an admittedly-hokey-looking throttle cable bracket (which worked just fine for over two years, and passed multiple tech inspections, thankyouverymuch).
This setup made enough power to almost keep up with a certain very-well-prepped supercharged E36 BMW in SM class... if only I could have driven the EGbeater better.
It dynoed 216whp/163wtq (done on a Dynapack, not optimistic Dynojet figures), with very conservative ignition and fuel settings to keep it safe under hot summer conditions.
I've also got receipts for $300 worth of new parts from Moss Motors (the authorized distributor of Jackson SC parts)... just so you know that I didn't use a bunch of used, tired parts when I installed this setup on my car in late-summer '07:
Last edited by EGbeater; 04-07-2009 at 05:47 PM.
03-19-2009, 08:48 AM
#2
Honda-Tech Member
Join Date: May 2004
Location: In my kevlar STATUS Legunas, PALLDAY
Posts: 5,614
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
wow I really with this was for a B16, i'd be all over it. good luck with your sale man.
03-20-2009, 06:16 AM
#3
Honda-Tech Member
Join Date: Feb 2004
Location: Wiscago, usa
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
bump for my good friend!
I can vouch that this JRSC setup is in excellent condition and makes some serious zero-lag torque.
I can vouch that this JRSC setup is in excellent condition and makes some serious zero-lag torque.
03-23-2009, 02:06 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
GeT_NiCE, I don't get PM notifications on this site... just got your PMs today. Sorry about that...
Anyone interested in this stuff, please EMAIL ME DIRECTLY... hsunchen@hotmail dot com.
Bump it up!
Anyone interested in this stuff, please EMAIL ME DIRECTLY... hsunchen@hotmail dot com.
Bump it up!
03-26-2009, 03:07 PM
#6
Honda-Tech Member
Join Date: Dec 2006
Location: Rocklin, Ca,(near sac)
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
dang, I wish I would have seen this last week, just bought a jrsc on ebay. would you be willing to part out the injectors, ecu, and crank pulley? emailed u as well
Trending Topics
03-30-2009, 06:38 AM
#10
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
03-30-2009, 10:00 AM
#11
Honda-Tech Member
Join Date: Aug 2002
Location: Westslope, CO, United States
Posts: 3,048
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
I might have to take a trip to Boulder soon 
. Bump for you
. Bump for you
04-01-2009, 06:21 AM
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
Bump...
I'm thinking I'd rather keep the 440cc injectors, so I'll sell the rest of the kit for $1300 (plus shipping/Paypal fees).
Don't want the phearable.net ECU? Take off another $100. And if you don't need the CRV crank pulley and extra belts, you can pay $50 less on top of that.
I'm thinking I'd rather keep the 440cc injectors, so I'll sell the rest of the kit for $1300 (plus shipping/Paypal fees).
Don't want the phearable.net ECU? Take off another $100. And if you don't need the CRV crank pulley and extra belts, you can pay $50 less on top of that.
04-01-2009, 08:04 AM
#14
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
04-04-2009, 07:40 AM
#15
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
Saturday morning, day-after-a-track-day, need $$$ for DTC-70s and 2-piece rotors bump!
04-05-2009, 03:00 PM
#17
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
04-06-2009, 09:45 AM
#20
Honda-Tech Member
Join Date: Aug 2002
Location: Westslope, CO, United States
Posts: 3,048
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
That's very fair of ya. Just have to wait and see if I'm getting liad off. 140 people company wide get the pink slip tomorrow. No bueno
04-06-2009, 06:15 PM
#21
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: Colorado
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
All emails and PMs replied to! Now who actually wants to buy this stuff?
04-12-2009, 08:01 PM
#24
Honda-Tech Member
Join Date: Mar 2005
Location: Los Angeles, CA, USA
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete JRSC Jackson supercharger kit 440 RC injector, Phearable ECU, CRV pulley
Got it. Everything looks great. Excellent seller. Thanks again bro
Thread
Thread Starter
Forum
Replies
Last Post
ty521825
Classifieds: Forced Induction
15
12-23-2010 07:34 PM
ty521825
For Sale
11
12-23-2010 07:33 PM
mestizo
Classifieds: Forced Induction
46
05-17-2006 01:39 PM
