FF

im interested in the gauges they will fit a 87 hatch right ? and the turn signal and wipers would they fit my 87 hatch ? if so i got the money in hand let me know dahkrazybrz@hotmail.com

BR0KENB20

1964 honda s600 for sale..good builder ..located here in central california

NW Classic Honda

WTB: 14" jdm race wheels. 4x100 SSR's, Panasport's, Enkei's, Mugen's, Sprint Hart's, Gab's, ect. Pm me with what you have, offest, price, condition, location... 14" only, thanks!

Tyson

Mugen CF-48 13x6 Wheels *NIB*





please dont reply to me in this thread. click on the original thread.

super china china

Looking for an older integra or prelude in good running condition, body is not a problem.

DADOHCturbo

F/s D16A1 rebuilt shortblock -JE/SRP forged ,76mm,d16a6 turbo pistons,fully balanced,line bored,decked,ACT clutch.ran for 3 weeks,500=miles pulled out to sell car,had fresh hone & new rings installed by machine shop,still Fresh,.over$1000 invested-sacrifice $450 firm-----Taking your offers for trades. (15"Rims/D15B-vtec/D16z6 only),local or not pickup-preffered,possible shipping. ATTN:<if you are the person who left me a deposit, you can pay $350 or im selling it to someone else.dont have ur # & its been monthes ? still at same spot. shortblock PENDING sale.


Modified by DADOHCturbo at 8:53 PM 1/17/2008


Modified by DADOHCturbo at 9:36 PM 1/30/2008

78CITYTURBO

The car is complete for parts or restore. Then car ran some years ago before the headgasket went. I took the engine aparted to rebuild it but I don't have time plus I have two other 1978 Civic I'm working on.....I love Honda's more. The car is good condition for it's age. The floor is solid only surf rusts. There are some surf rusts on the back top of the body, some rusts in the back corner of the car, some rusts behind the front fenders. The 4 spd tranny is still in the car. The car come w/ a hardtop and a softtop frame. I'm asking 1500.00 for the car since is hard to come by but I'm open to offer...I need to move this so I can focuse on my Civic project for the love for Honda's... . I'm in Tucker...Atlanta area, Ga

NW Classic Honda

Um cool car but you shouldnt have posted it for sale here...

DADOHCturbo

SR20det , no,what would be cool is if had a F22C S2000 swap.

punkracer

i know this isnt in the FS/WTB section by i dont want it to get loss in the 5+ page thread....

long story ..my buddie bought a 1gen accord cvcc with a blown hondamatic...found a transmission shop to send tranny out to get rebuild...tranny brok on dyno...rince, lather, and repeat twice.....finaly third transmission a charm...and 7 months of waiting for this tranny to get back..... trans misson was sent back to us with no fittings on it and no brackets......it took them 7 months to rebuild the tranny casue they had to locate one......very very few in country...so knowing that he got a ZC motor with and A/T tranny....to keep it looking stock...

well that was four years ago...lol car rusted away to nothing car was crushed...i have a CVCC motor from a 78 accord.. and BRAND NEW TRANSMISSION w/ BRAND NEW TQ converter...700obo takes it all

.all ready too go...need it gone takign up space in the shop..not to metion the iron block *** motor is a bitch to move...PM me for details

pic upon request... or later on this week ...lata

g3teg97

Looking for 86-89 Integra optional side skirts.

underpressure02

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smithenhiven &raquo;</TD></TR><TR><TD CLASS="quote">

You should contact Brian Baker, from http://www.hondasportsregistry.com. Last time I was at his shop, he had one or two of these cars rotting away next to his parking lot. I'm sure he would sell (perhaps give) you a complete car or two. He's just across the eastern PA/NY border, in Middletown NY. </TD></TR></TABLE>

Thanks for the info. I will be calling him shortly.

fitfreak3

FOR SALE PM ME IF INTERESTED

WEBER CARB FOR HONDA $75

NW Classic Honda

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g3teg97 &raquo;</TD></TR><TR><TD CLASS="quote">Looking for 86-89 Integra optional side skirts. </TD></TR></TABLE>
Pmd. I have the optional sides, front lip and a Mugen wing for the 85-89 Integra and rear mud gaurds for sale.

hippiezig

what do you8 want for the motor & tranny ,is it a 5 speed trans ?where is it at...hippiezig

hippiezig

i could really use that tranny for my project 77 cvcc please contact me boblerette@ yahoo.com

3rd generation honda

hello got a 89 honda accord dx, looking for racing seats,what do you guys sugest around
$300.00

fitfreak3

For Sale 83' Civic Wagon 1500 5 speed
200,000 plus miles.Car runs but smokes a bit, I think it is the carb. New pleather seat covers because the original seats are torn. Original paint and motor. 13" chrome wheels with newer tires. New NGK wires,plugs,cap,rotor,thermostat, radiator, fan switch, air &oil filters and oil all changed recently. Included in sale will be 2 new rear shocks and also a good OEM carb. All registration fees have been paid and is current only awaiting smog. TAKING OFFERS






Modified by fitfreak3 at 5:31 PM 4/16/2008

NW Classic Honda

I love that wagon! Good luck with the sale, it should go fast! Why are you selling it now?

fitfreak3

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmda7 &raquo;</TD></TR><TR><TD CLASS="quote">I love that wagon! Good luck with the sale, it should go fast! Why are you selling it now?</TD></TR></TABLE>

Thanks, I'm selling because I need to pay bills and I really don't need to have 4 cars.

fitfreak3

FOR SALE: PM ME IF INTERESTED
16X7 ET+38 KONIG REMEMBERS 4X100(BBS RS COPIES) AND BF GOODRICH TIRES ABOUT 50% TREAD LEFT. NO CURBS AT ALL AND I'D SAY AN OVERALL 8 OUT OF 10. 1 WHEEL MISSING CENTERCAP BUT CAN BE PURCHASED THRU DRFLICKNER FOR $30 SHIPPED. SOLD

*CAR NOT INCLUDED*


Modified by fitfreak3 at 6:09 PM 1/28/2008

DADOHCturbo

NW Classic Honda

I bought the wrong OEM repair manual on Ebay the other day. Its a rare OEM 1987 Honda CRX Si (only) repair manual. I needed one for a 87 Si hatch. These are getting rare and expensive. Its in great shape with very minor smudges and no tears. A must for any CRX owner so use what the dealer uses to fix your rex! Very detailed. These were over $100 at the dealer. I only want what I paid for it. $63 shipped firm. Boxed and ready to ship! Im me for more details!

NW Classic Honda

I also have a spare 84-87 Honda Civic hatch RARE red refective panel. (Si or optional) It mounts between the taillights. It has two minor small cracks but is in otherwise great shape. Update your Civic hatch! $50 shipped obo Im me for more details!

funkmaster

Im selling a ton of parts since after long consideration I have decided to part out my 87 CRX si.
Im going to start with a list of all the parts already off the car, and then list parts still on the car but available.

All prices are OBO, no dibs, first one with paypal to me gets the part. NO credit card payments will be accepted, so please keep that in mind. I also will accept Money orders, cash, and personal checks (shipment held until chcek clears).
All shipments will originate from 45246 and the buyer will pay for EXACT S&H charges. Im not here to rape ppl on S&H charges like youll find on Ebay.

Pictures are coming, but I havent brought my camera into work where I have all these parts. If you want a pic of something specific, let me know.

Parts off the car and ready to ship:

Autopower 6pt Bolt-in Roll cage
SOLD, Thanks!!!

Perfect OEM Honda header panel.
SOLD, Thanks!!!

Like new hatch struts, purchased at Autozone.
$20


B pillar garnish, both sides, includes CRX emblems.
$20


85si 140mph Instrument cluster.
Has customized (made to fit, since straight from ebay it doesnt fit at all) aluminum guage overlay.
Works perfectly
$40



Modified by funkmaster at 7:58 AM 1/29/2008