Official FS/WTB thread for all classic hondas
11-16-2007, 10:17 AM
#76
Honda-Tech Member
Join Date: Mar 2002
Location: North Central, WV, USA
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Re: (smithsonjake)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smithsonjake »</TD></TR><TR><TD CLASS="quote">looking for '84 crx side mirrors and headlights.</TD></TR></TABLE>
I have a set.
I have a set.
11-16-2007, 10:34 AM
#77
Honda-Tech Member
Join Date: Mar 2002
Location: North Central, WV, USA
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out an 70 N600 (smithenhiven)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smithenhiven »</TD></TR><TR><TD CLASS="quote">Well, I knew I shouldn't have bought that 83 1500S, the local municipality says I can't have an unregistered car just sitting in my driveway, and I've got nowhere else to put it, so I'm going to try and sell it.
It's a 83 Civic 1500S, 124K miles, interior is in exceptionally well condition, one small crack in the dash, a few tears in the seats, but otherwise nice.
The body needs some attention. There are some rust spots, but nothing rusted through, very minor stuff. Faded paint on roof, and some dents/dings/scratches here and there.
I personally haven't heard the car run, but the previous owner assures me that it runs and drives fine. It's not running at the moment because the down-pipe that runs off of the exhuast manifold was off (I guess the original peice failed, and I've got a new peice to put on). I just haven't gotten around to putting it on yet.
Now I would just like to just get back what I have into it. I paid $400 for the car, $50 to my friend to pick it up, and something like $200 in parts (new cat convertor, and the exhuast peice I mentioned had to be custom made, new distrib cap/rotor, and a few other minor things).
So $650 will buy the car as-is. However, if it appears the car would make me more money by parting it out, I will certainly consider doing that (if interested in parts, please post or PM me with what you might be interested in).
Jason. </TD></TR></TABLE>
Your local municipality is full of ****. They cannot tell you what you can have on "your" property. They "can" say you can't park and unregistered vehicle on a city street. If it is actually in your drive way, tell them to expletive off.
It's a 83 Civic 1500S, 124K miles, interior is in exceptionally well condition, one small crack in the dash, a few tears in the seats, but otherwise nice.
The body needs some attention. There are some rust spots, but nothing rusted through, very minor stuff. Faded paint on roof, and some dents/dings/scratches here and there.
I personally haven't heard the car run, but the previous owner assures me that it runs and drives fine. It's not running at the moment because the down-pipe that runs off of the exhuast manifold was off (I guess the original peice failed, and I've got a new peice to put on). I just haven't gotten around to putting it on yet.
Now I would just like to just get back what I have into it. I paid $400 for the car, $50 to my friend to pick it up, and something like $200 in parts (new cat convertor, and the exhuast peice I mentioned had to be custom made, new distrib cap/rotor, and a few other minor things).
So $650 will buy the car as-is. However, if it appears the car would make me more money by parting it out, I will certainly consider doing that (if interested in parts, please post or PM me with what you might be interested in).
Jason. </TD></TR></TABLE>
Your local municipality is full of ****. They cannot tell you what you can have on "your" property. They "can" say you can't park and unregistered vehicle on a city street. If it is actually in your drive way, tell them to expletive off.
11-19-2007, 12:11 PM
#78
Honda-Tech Member
Join Date: Feb 2006
Location: Norman, OK, USA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out an 70 N600 (WhiteSTi)
most muni laws (actual incorporated cities and towns) do not allow non-street legal vehicles exposed on one's property (even tarp'd in the back yard behind a privacy fence). the only way to keep it, is to put it in the garage (and some cities will bitch about that)
and, to a city, non-tagged, non-registered, non-insured, is non-street legal.
and, really....there's nothing the private home owner can do, except move.
(i have 20 hondas in my current collection, only 5 of them are fully street legal.....
i've played this game more than a couple times)
and, to a city, non-tagged, non-registered, non-insured, is non-street legal.
and, really....there's nothing the private home owner can do, except move.
(i have 20 hondas in my current collection, only 5 of them are fully street legal.....
i've played this game more than a couple times)
11-20-2007, 07:55 PM
#79
Honda-Tech Member
Re: Parting out an 70 N600 (psychoboy)
looking for any square bodied front lip for a 2gen lude. i believe the 1gen teg is the best fit but anything out there lemme know, we can compare measurements.
11-25-2007, 09:42 PM
#80
Honda-Tech Member
Re: Parting out an 70 N600 (WhiteSTi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhiteSTi »</TD></TR><TR><TD CLASS="quote">
Your local municipality is full of ****. They cannot tell you what you can have on "your" property. They "can" say you can't park and unregistered vehicle on a city street. If it is actually in your drive way, tell them to expletive off.</TD></TR></TABLE>
Yup, your wrong! In my city every car on your property has to be licenced and currently tabed. Cant have a car on jackstands for more than 20 days at a time either. It sucks but Im not payin the $850 fine for each violation! Gota move outa the city if you want to get away with that one...
Your local municipality is full of ****. They cannot tell you what you can have on "your" property. They "can" say you can't park and unregistered vehicle on a city street. If it is actually in your drive way, tell them to expletive off.</TD></TR></TABLE>
Yup, your wrong! In my city every car on your property has to be licenced and currently tabed. Cant have a car on jackstands for more than 20 days at a time either. It sucks but Im not payin the $850 fine for each violation! Gota move outa the city if you want to get away with that one...
11-28-2007, 10:11 PM
#81
Honda-Tech Member
Wanted: 87 Civic Si parts...
Wanted: 87 Civic Si sunroof (trunk) bag and cover that snaps on the inside. Pass rear black floor mat. Rear mud gaurds? Plus any other OEM 87 Si accessories. Im also looking for any Mugen parts for this as well! Pm me or jdmda7@hotmail.com...
Modified by jdmda7 at 3:35 PM 12/3/2007
Modified by jdmda7 at 3:35 PM 12/3/2007
12-04-2007, 07:59 AM
#82
Honda-Tech Member
FS: 2nd gen Civic parts
Well, a project from last winter resulted in a car with much more cancer than was expected. So, I have some parts from an 82 1500 GL.
5spd gauge cluster in decent shape. Not sure on mileage, but I can check.
Passenger side tail light in good shape. Not cracked, and did not have any condensation in it.
I also have a set of 13" beauty rings that have little bit of pitting, but in pretty good shape.
I might have a speedo cable and a hood release laying around too, but most other parts have been sold or weren't worth keeping.
PM me if you want pics or shoot me an offer!
Well, a project from last winter resulted in a car with much more cancer than was expected. So, I have some parts from an 82 1500 GL.
5spd gauge cluster in decent shape. Not sure on mileage, but I can check.
Passenger side tail light in good shape. Not cracked, and did not have any condensation in it.
I also have a set of 13" beauty rings that have little bit of pitting, but in pretty good shape.
I might have a speedo cable and a hood release laying around too, but most other parts have been sold or weren't worth keeping.
PM me if you want pics or shoot me an offer!
12-05-2007, 12:32 PM
#86
Honda-Tech Member
Re: (Mr.Nasty)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.Nasty »</TD></TR><TR><TD CLASS="quote">Im looking for any Civic, Prelude or CRX for sale. Any info on any car would be appreciated. Thank you. </TD></TR></TABLE>
Um check the for sale thread on HT, craigslist, ebay or any other webpage on the net. Its not that hard to find classic Hondas for sale plus it helps to be more specific...
Um check the for sale thread on HT, craigslist, ebay or any other webpage on the net. Its not that hard to find classic Hondas for sale plus it helps to be more specific...
12-06-2007, 04:24 PM
#88
Honda-Tech Member
Re: (Mr.Nasty)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.Nasty »</TD></TR><TR><TD CLASS="quote">Specific how?
As in; I would prefer a honda civic, manual transmission, under $750.</TD></TR></TABLE>
That sounds like a graigslist find. I got my 87 Civic Si for $750 on there so good luck and show us when you get it!
As in; I would prefer a honda civic, manual transmission, under $750.</TD></TR></TABLE>
That sounds like a graigslist find. I got my 87 Civic Si for $750 on there so good luck and show us when you get it!
12-06-2007, 04:52 PM
#89
Join Date: Jan 2007
Location: san diego, ca, usa
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official FS/WTB thread for all classic hondas (89efDUSTY)
F/S
an entire ED motor (yes with fly wheel) out of an 1978-82 civic make me an offer. Iam also willing to trade for a complete vtec head for the f22 from a fifth gen accord.
an entire ED motor (yes with fly wheel) out of an 1978-82 civic make me an offer. Iam also willing to trade for a complete vtec head for the f22 from a fifth gen accord.
12-08-2007, 12:05 AM
#91
Honda-Tech Member
Join Date: Mar 2005
Location: MD, US
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
CRX seat on eBay.
this is not mine, just thought i'd post it up.
http://cgi.ebay.com/ebaymotors...idget
this is not mine, just thought i'd post it up.
http://cgi.ebay.com/ebaymotors...idget
12-08-2007, 11:17 AM
#92
Honda-Tech Member
Re: (B18Ch1ck)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18Ch1ck »</TD></TR><TR><TD CLASS="quote">CRX seat on eBay.
this is not mine, just thought i'd post it up.
http://cgi.ebay.com/ebaymotors...idget</TD></TR></TABLE>
You posted in the wrong section. This is pre-88, take it to the EF fourm...
this is not mine, just thought i'd post it up.
http://cgi.ebay.com/ebaymotors...idget</TD></TR></TABLE>
You posted in the wrong section. This is pre-88, take it to the EF fourm...
12-09-2007, 10:27 PM
#93
Join Date: Oct 2007
Location: Atlant, Ga, USA
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
1987 Civic hatch for sale. I am not positive on the milage. the car runs and drives. Has a brand new clutch installed with a 5 speed transmission. 12valve carbed engine. No rust but has some light dents in the rear quarter panels. The rear taillights need to be replaced. asking $900
Modified by shadow102 at 11:52 PM 12/9/2007
Modified by shadow102 at 11:52 PM 12/9/2007
12-11-2007, 07:38 AM
#94
Honda-Tech Member
Join Date: Nov 2004
Location: Hopkinton, ma, usa
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
87 CRX D15A3 engine/tranny out of racecar $1000 or part
D15A3 that came out of my racecar. Bottom end was built about 5 years ago, new head by Chuck Noonan, LSD is CRE (aka by Chuck Noonan), big aluminum oil pan. SCCA IT legal. Tranny has some grinding between gears and the clutch is worn, but drivable for HPDE's. ECU and wiring also included. I'm putting a B in the CRX so this is available complete. Otherwise, I'll start parting. If you want a major assembly (just engine, just tranny, for example), I'll do it. Local pickup in Hopkinton, MA for the whole thing as a unit. I can ship the tranny. Not the engine....too heavy for me to carry. This thing was bulletproof. I'm in prepared class, so can put any 4 cyl engine in the car that I want, so am doing a poor man's type R setup with a quaife. aka....spending real money.
email me at Jackffr1846 "at" msn "dot" com
pics for serious inquiries
email me at Jackffr1846 "at" msn "dot" com
pics for serious inquiries
12-12-2007, 12:33 PM
#95
Honda-Tech Member
iTrader: (3)
Join Date: May 2004
Location: Henderson, pasadena,fontana, NV/CA, USA
Posts: 4,076
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1 gen integra edm/jdm corner and side markers...
well guys since this is the FS thread for all classic hondas here it goes...
got a set of jdm/edm corner lights and side markers for the 1gen integra. they all come with bulbs (don't know if they work) and pigtails....throw me some offers and if u got some stuff to trade just pm me.SOLD.
also have a set of old skool jdm Drag)) Progressive rims. one has a small curb. they have the drag stickers.....but fading. also have 11 lug caps that would need rechroming. 3 of they are missing 1 tab.
specs
15x6.5 4x100 38 offset.
lug caps
hit me up with some offers, and if u wanna trade let me know.......for the rims i'm looking to get some jdm rims in white....but let me know what u got.
Modified by AZTEKEF9 at 2:03 PM 12/12/2007
Modified by AZTEKEF9 at 3:26 PM 1/9/2008
got a set of jdm/edm corner lights and side markers for the 1gen integra. they all come with bulbs (don't know if they work) and pigtails....throw me some offers and if u got some stuff to trade just pm me.SOLD.
also have a set of old skool jdm Drag)) Progressive rims. one has a small curb. they have the drag stickers.....but fading. also have 11 lug caps that would need rechroming. 3 of they are missing 1 tab.
specs
15x6.5 4x100 38 offset.
lug caps
hit me up with some offers, and if u wanna trade let me know.......for the rims i'm looking to get some jdm rims in white....but let me know what u got.
Modified by AZTEKEF9 at 2:03 PM 12/12/2007
Modified by AZTEKEF9 at 3:26 PM 1/9/2008
12-14-2007, 07:43 AM
#96
Honda-Tech Member
Re: Official FS/WTB thread for all classic hondas (XANTHODC2R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XANTHODC2R »</TD></TR><TR><TD CLASS="quote">WTB 1978 Honda Civic CVCC Hatchback OEM Amber Fog Lights. Thanks in advance. 
</TD></TR></TABLE>
No such thing. First thing is that those weren't fog lights. They were turn signals. Next is that 1977 was the last year those "fog lights" were placed in that position. In 1978, they started integrating them under the bumper.
</TD></TR></TABLE>No such thing. First thing is that those weren't fog lights. They were turn signals. Next is that 1977 was the last year those "fog lights" were placed in that position. In 1978, they started integrating them under the bumper.
12-19-2007, 06:41 PM
#97
Honda-Tech Member
Join Date: Dec 2007
Location: Austin, TX, United States
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
my car- 86 si hatch
WTB:
working tachometer/ entire cluster if i have to
jdm headlights, corners, tail lights and center piece, and header panel in white if possible.
sunroof shade?
oem foam spoiler
i think thats about it
WTB:
working tachometer/ entire cluster if i have to
jdm headlights, corners, tail lights and center piece, and header panel in white if possible.
sunroof shade?
oem foam spoiler
i think thats about it
12-26-2007, 08:22 AM
#98
Join Date: Dec 2007
Location: Tunnel Hill, Ga, USA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
WTB 1st Gen Civic Stuff...
WTB a good 1st gen civic EB3 already "done" or a good 1st gen accord non cvcc engine (?EN1?) for my 1979 1200 civic. The current EB3 is leaking oil like a sieve around the flywheel. Located in N.W. Georgia (Dalton area). Also, if anyone has any AZ or N 600 parts (1969-1972) local let me know.
Thanks,
KCandtheZ
1972 AZ600 Coupe
1979 1200 Civic
Thanks,
KCandtheZ
1972 AZ600 Coupe
1979 1200 Civic
12-28-2007, 03:48 PM
#99
Junior Member
Join Date: Nov 2004
Location: Honolulu, HI, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
1st gen parts
87 teg throttle body $10
http://img.photobucket.com/alb...7.jpg
engine wire harness $40 used on an 87 d16a1 in an 85 crx si minus vacuum black box
http://img.photobucket.com/alb...3.jpg
new OEM spark plug wire set with coil wire $10
new OEM civic valve cover gasket $5
(2) bumper turn signal light pairs $10 each pair
1 pair sun visor beige $10
http://img.photobucket.com/alb...2.jpg
1 passenger side a-pillar grab handle beige (oh **** handle) $5
http://img.photobucket.com/alb...5.jpg
84-87 civic gauge cluster (condition unknown but looks ok) $15
pair of used ground controls 250lb $20
85 crx si parts:
rear deforster switch $5
http://img.photobucket.com/alb...6.jpg
dash clock $5
http://img.photobucket.com/alb...7.jpg
gauge cluster suround $5
http://img.photobucket.com/alb...2.jpg
dimmer control $5
http://img.photobucket.com/alb...1.jpg
sunroof switch $5
http://img.photobucket.com/alb...0.jpg
a/c , heater controls $20
combination switch for turn signals, wipers etc. $10
pair of side view mirrors $20
http://img.photobucket.com/alb...4.jpg
all prices are without shipping.
i can combine multiple purchases to save on shipping.
if local can meet up.
mahalo
b
http://img.photobucket.com/alb...7.jpg
engine wire harness $40 used on an 87 d16a1 in an 85 crx si minus vacuum black box
http://img.photobucket.com/alb...3.jpg
new OEM spark plug wire set with coil wire $10
new OEM civic valve cover gasket $5
(2) bumper turn signal light pairs $10 each pair
1 pair sun visor beige $10
http://img.photobucket.com/alb...2.jpg
1 passenger side a-pillar grab handle beige (oh **** handle) $5
http://img.photobucket.com/alb...5.jpg
84-87 civic gauge cluster (condition unknown but looks ok) $15
pair of used ground controls 250lb $20
85 crx si parts:
rear deforster switch $5
http://img.photobucket.com/alb...6.jpg
dash clock $5
http://img.photobucket.com/alb...7.jpg
gauge cluster suround $5
http://img.photobucket.com/alb...2.jpg
dimmer control $5
http://img.photobucket.com/alb...1.jpg
sunroof switch $5
http://img.photobucket.com/alb...0.jpg
a/c , heater controls $20
combination switch for turn signals, wipers etc. $10
pair of side view mirrors $20
http://img.photobucket.com/alb...4.jpg
all prices are without shipping.
i can combine multiple purchases to save on shipping.
if local can meet up.
mahalo
b
