Official FS/WTB thread for all classic hondas - Page 2 - Honda-Tech - Honda Forum Discussion

Classic Hondas All Pre-1988 Hondas.

Official FS/WTB thread for all classic hondas

Old 07-10-2007, 12:04 AM
  #26  
Honda-Tech Member
 
NW Classic Honda's Avatar
 
Join Date: May 2006
Location: Seattle, WA USA
Posts: 2,838
Default 86-89 Integra Mugen wing (Rare), OEM armrest, OEM sunroof visor

Mugen wing for a 86-89 Integra in great shape with the origional Mugen emblem. Factory red paint. VERY RARE!!!

OEM black armrest MINT!!! No cracks no rips!

OEM sunroof visor with hardwear, super clean!

Make offers!


Modified by jdmda7 at 6:28 PM 7/10/2007
NW Classic Honda is offline  
Old 07-10-2007, 10:40 AM
  #27  
Honda-Tech Member
 
Jonathan_ED3's Avatar
 
Join Date: Nov 2001
Location: Dallas, Tejas
Posts: 8,651
Default Re: Official FS/WTB thread for all classic hondas (Fennec)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fennec &raquo;</TD></TR><TR><TD CLASS="quote">

damn man you are still looking for the window seal? i remember you looking for that on 1stgencivic.com a long time ago.... sorry man good luck with the search.

you could always just reuse an old one from the junk yard. i have an S window seal still on my junk hatch but i would like to have another window seal to put back when i take it out and get it running again, it doesn't have to be an S window seal

stuff is so hard to find on these cars, they've been abandoned by the aftermarket (not just performance parts but just regular replacement parts)</TD></TR></TABLE>

Hey man! Yeah, I'm still looking for it. I haven't come across a good used one yet that would be worth my time to go through the PITA to swap. They are in about the same condition mine is in. The Texas sun is brutal on weatherstripping and rubber pieces.


FS: OEM 86-89 Integra armrest. Brown in color, but in awesome shape! Best Offer!
Jonathan_ED3 is offline  
Old 07-10-2007, 10:52 AM
  #28  
Member
 
86si's Avatar
 
Join Date: Dec 2003
Location: Hyde Park, NY, USA
Posts: 2,526
Default Re: Official FS/WTB thread for all classic hondas (Jonathan_ED3)

WTB drivers door body side molding for my 86 civic hatch. it has to be as mint as possible.
86si is offline  
Old 07-10-2007, 03:28 PM
  #29  
Honda-Tech Member
 
bubba_crx's Avatar
 
Join Date: Mar 2007
Posts: 77
Default Re: Official FS/WTB thread for all classic hondas (86si)

WTB: Pre-88 Honda Civic, CRX, anything but accords and preludes. Older the better, but prefer somewhat ok shape. I'm located in Fargo, but would be willing to travel to get it.
bubba_crx is offline  
Old 07-10-2007, 04:36 PM
  #30  
Honda-Tech Member
 
cb07's Avatar
 
Join Date: Dec 2006
Location: Houston, TX, u.s.a
Posts: 422
Default

How far you wanna travel?? ^^^
cb07 is offline  
Old 07-11-2007, 02:13 PM
  #31  
Honda-Tech Member
 
bubba_crx's Avatar
 
Join Date: Mar 2007
Posts: 77
Default Re: (cb07)

It all depends on the car, price, etc...
bubba_crx is offline  
Old 07-13-2007, 07:17 AM
  #32  
Member
 
86si's Avatar
 
Join Date: Dec 2003
Location: Hyde Park, NY, USA
Posts: 2,526
Default Re: (bubba_crx)

FS 3G/1G fuel injectin stuff


harness 75.00 shipped

manifold with injectors/TB and rail 75.00 shipped

control box 20.00 shipped

resistor box 20.00 shipped
86si is offline  
Old 07-15-2007, 07:05 AM
  #33  
Honda-Tech Member
iTrader: (1)
 
Mr.Milton's Avatar
 
Join Date: Feb 2007
Location: Los Angeles, CA, USA
Posts: 4,445
Default Re: Official FS/WTB thread for all classic hondas (89efDUSTY)

FS:87' honda civic hatch DX. clean body (White).complete interior not running. Great project car. $300 OBO PM me if interested..
Mr.Milton is offline  
Old 07-16-2007, 01:53 PM
  #34  
Honda-Tech Member
iTrader: (1)
 
Mr.Milton's Avatar
 
Join Date: Feb 2007
Location: Los Angeles, CA, USA
Posts: 4,445
Default Re: Official FS/WTB thread for all classic hondas (EF8-B18C)

Bump
Mr.Milton is offline  
Old 07-16-2007, 06:40 PM
  #35  
11:11
 
smithenhiven's Avatar
 
Join Date: Nov 2003
Location: Hopewell, PA, USA
Posts: 3,887
Default Re: Official FS/WTB thread for all classic hondas (EF8-B18C)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8-B18C &raquo;</TD></TR><TR><TD CLASS="quote">Bump </TD></TR></TABLE>

This thread is a sticky my friend, no need for bumps.
smithenhiven is offline  
Old 07-16-2007, 07:37 PM
  #36  
Member
 
86si's Avatar
 
Join Date: Dec 2003
Location: Hyde Park, NY, USA
Posts: 2,526
Default Re: Official FS/WTB thread for all classic hondas (86si)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 86si &raquo;</TD></TR><TR><TD CLASS="quote">WTB drivers door body side molding for my 86 civic hatch. it has to be as mint as possible. </TD></TR></TABLE>
i really need tis thing bad. somebody please help!!
86si is offline  
Old 07-17-2007, 10:30 PM
  #37  
Honda-Tech Member
 
cb07's Avatar
 
Join Date: Dec 2006
Location: Houston, TX, u.s.a
Posts: 422
Default

Not mine, but I thought someone might be interested:

http://phoenix.craigslist.org/car/376075263.html

I'd pick it up if I had the cash.
cb07 is offline  
Old 07-20-2007, 02:54 PM
  #38  
Honda-Tech Member
 
thatDA's Avatar
 
Join Date: Apr 2007
Location: WestCovina/Orange/Anaheim, socal, usa
Posts: 19
Default

thatDA is offline  
Old 07-20-2007, 05:30 PM
  #39  
Member
 
rotten's Avatar
 
Join Date: Jul 2002
Location: Renton, WA
Posts: 1,006
Default Parting out an 70 N600

Not really sure that pre 87 counts as a "classic" honda. For me the newest car you could even call a 'classic' would be the 2nd generation Civics.... I fear that this forum is going to be split between two 'camps' on this forum--one that has 3g civics/crxes which are MUCH more prevalant, and then the rest of the 'classic' cars like the N600/Z600, S cars, 1200s, etc. Kinda like having a "road race and drag race" forum--not a lot of overlap between the camps.

But anyway.

We're going to be parting out an 1970 N600. It was at one point in a roll-over style accident (with the Bondo job to prove it) and the body is rusted pretty well. I'm going to be putting over a lot of the parts from this car onto our 1971 N600 and 1972 Z600s. But the car is essentially complete so if you're looking for something obscure let me know.

Car is located in Bellingham, WA. Will probably be stripping it down tomorrow.

I know that I am looking for some driver's side door/fender trim parts if you're considering trades. The thin chrome part that goes down the side of the car.

Cheers,
-k
rotten is offline  
Old 07-26-2007, 09:46 AM
  #40  
11:11
 
smithenhiven's Avatar
 
Join Date: Nov 2003
Location: Hopewell, PA, USA
Posts: 3,887
Default Re: Parting out an 70 N600 (rotten)

Well, I knew I shouldn't have bought that 83 1500S, the local municipality says I can't have an unregistered car just sitting in my driveway, and I've got nowhere else to put it, so I'm going to try and sell it.

It's a 83 Civic 1500S, 124K miles, interior is in exceptionally well condition, one small crack in the dash, a few tears in the seats, but otherwise nice.

The body needs some attention. There are some rust spots, but nothing rusted through, very minor stuff. Faded paint on roof, and some dents/dings/scratches here and there.

I personally haven't heard the car run, but the previous owner assures me that it runs and drives fine. It's not running at the moment because the down-pipe that runs off of the exhuast manifold was off (I guess the original peice failed, and I've got a new peice to put on). I just haven't gotten around to putting it on yet.

Now I would just like to just get back what I have into it. I paid $400 for the car, $50 to my friend to pick it up, and something like $200 in parts (new cat convertor, and the exhuast peice I mentioned had to be custom made, new distrib cap/rotor, and a few other minor things).

So $650 will buy the car as-is. However, if it appears the car would make me more money by parting it out, I will certainly consider doing that (if interested in parts, please post or PM me with what you might be interested in).

Jason.
smithenhiven is offline  
Old 07-26-2007, 02:27 PM
  #41  
Honda-Tech Member
 
JamesS's Avatar
 
Join Date: Jan 2003
Location: Bay Area, CA, usa
Posts: 962
Default Re: Parting out an 70 N600 (smithenhiven)

Ran across this 77civic in local craigslist:

http://sfbay.craigslist.org/sby/car/377597299.html

JamesS is offline  
Old 08-11-2007, 08:51 AM
  #42  
Honda-Tech Member
iTrader: (1)
 
87mugenprocr-x's Avatar
 
Join Date: Sep 2006
Location: San Diego
Posts: 115
Default

WTB - AWD EW Wagon Block 84-87. Willing to pay good money for this item. Serious buyer with cash in hand, please email me with any information and availability. Located in SoCal but I dont mind paying for the shipping.

Thank you,
Julian
[email protected]
87mugenprocr-x is offline  
Old 08-12-2007, 06:52 PM
  #43  
Honda-Tech Member
 
Jonathan_ED3's Avatar
 
Join Date: Nov 2001
Location: Dallas, Tejas
Posts: 8,651
Default

Still WTB....rear window seal for 1980-1983 Civic 3dr hatchback!!!!
Jonathan_ED3 is offline  
Old 08-14-2007, 01:09 PM
  #44  
11:11
 
smithenhiven's Avatar
 
Join Date: Nov 2003
Location: Hopewell, PA, USA
Posts: 3,887
Default Re: (Jonathan_ED3)

WTB: Carb, or carb rebuild kit for 1983 Civic 1500S (not sure, but other carbs from other years might work)

Also need a brake master cylinder for same car.
smithenhiven is offline  
Old 08-17-2007, 06:14 PM
  #45  
 
Javi_CR-X's Avatar
 
Join Date: Jul 2007
Location: San Jose, CA, United States
Posts: 8
Default

WTB: passenger side fender for 85' CRX.
Javi_CR-X is offline  
Old 08-18-2007, 02:30 PM
  #46  
 
stevet10's Avatar
 
Join Date: Aug 2007
Location: Philadelphia, pa
Posts: 1
Default Re: Parting out an 70 N600 (smithenhiven)

Could you let me know if the 83 1500S is still available? PM me.
stevet10 is offline  
Old 08-18-2007, 10:18 PM
  #47  
11:11
 
smithenhiven's Avatar
 
Join Date: Nov 2003
Location: Hopewell, PA, USA
Posts: 3,887
Default Re: Parting out an 70 N600 (stevet10)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stevet10 &raquo;</TD></TR><TR><TD CLASS="quote">Could you let me know if the 83 1500S is still available? PM me. </TD></TR></TABLE>

You can't recieve PM's until you loose the trial member status.

But yes, the 83 1500S is still available, but the price has gone up a bit. This is due to the fact that I had some mechanical work done to the car, and it's running pretty good right now.

If you want to discuss it privately, you can email me at [email protected]

Thanks,
Jason.
smithenhiven is offline  
Old 08-20-2007, 07:57 PM
  #48  
Honda-Tech Member
 
b16a2rex's Avatar
 
Join Date: Jul 2005
Location: Tupelo, MS, U.S.
Posts: 109
Default

Right now i have a few cars that i'm parting out if any one is interested

a 78 civic hatch
a 79 civic hatch
a 80 prelude

just post whatcha need and ill see if its there
b16a2rex is offline  
Old 08-20-2007, 08:14 PM
  #49  
Honda-Tech Member
 
Jonathan_ED3's Avatar
 
Join Date: Nov 2001
Location: Dallas, Tejas
Posts: 8,651
Default

Hey guys... still WTB rear window seal for 2G Civic hatchback!!!!
Jonathan_ED3 is offline  
Old 08-28-2007, 08:34 PM
  #50  
Honda-Tech Member
 
CRX91SE's Avatar
 
Join Date: Feb 2007
Location: Canada
Posts: 371
Default Re: (Jonathan_ED3)





Ok I decided to put it up for sale, I am looking to get $200.00 + Shipping.

Here is a link on here, VISOR

It’s rare and I would like to see it go to a good home. A nice clean addition to your 1g, It has all the hard wear to install. If you interested or you would like to purchase please pm me, keep this thread clean!

Thanks
-Chris
CRX91SE is offline  

Thread Tools
Search this Thread
Quick Reply: Official FS/WTB thread for all classic hondas


Contact Us About Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: