My new 87 CRX SI
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
My 87 CRX Si's Worklog
This is my first Honda.. Its an 87 CRX SI... I didn't see an area for the 87 CRX, this was the closest thing to it...
1987 CRX si 5 speed with 170xxx,
The car isn't going to have anything major done, but I figured I would show my work...
The car was bought for $750. Day one fuel pump is going to be replaced (Tomorrow) since I ran the tank dry and merked it test driving it...
The car was red, someone JDM primer'd it black, w/e, IDC, I'll clean up the paint sometime down the road.
It has 2 quarter sized rusted out holes in the spare tire area, which will be welded with chicken wire and new plates.
Rear windows are tinted with probably about 5%-20%, IDK really.
The interior has been taken apart. The owner was looking for rust and only found those 2 spots in the tire area... I will be putting in floor mats. (Interior pics come tomorrow.
AC/Heat works, all the lights work, etc etc. Should be a fun car to work on.
This is the car as it sits...
New pics will follow when I put the interior back together...
T.O.C.
Bad Fuel Pump...WEEEE
Sports Authority Meet... Fogs Gone...
New Plugs/Wires, Adjusted Ride Height, CRX on Lift...
NO HOOD... FEELS SO GOOD...
YAY LEAKING OIL
1987 CRX si 5 speed with 170xxx,
The car isn't going to have anything major done, but I figured I would show my work...
The car was bought for $750. Day one fuel pump is going to be replaced (Tomorrow) since I ran the tank dry and merked it test driving it...
The car was red, someone JDM primer'd it black, w/e, IDC, I'll clean up the paint sometime down the road.
It has 2 quarter sized rusted out holes in the spare tire area, which will be welded with chicken wire and new plates.
Rear windows are tinted with probably about 5%-20%, IDK really.
The interior has been taken apart. The owner was looking for rust and only found those 2 spots in the tire area... I will be putting in floor mats. (Interior pics come tomorrow.
AC/Heat works, all the lights work, etc etc. Should be a fun car to work on.
This is the car as it sits...
New pics will follow when I put the interior back together...
T.O.C.
Bad Fuel Pump...WEEEE
Sports Authority Meet... Fogs Gone...
New Plugs/Wires, Adjusted Ride Height, CRX on Lift...
NO HOOD... FEELS SO GOOD...
YAY LEAKING OIL
Last edited by Gabe87CRX; 04-28-2010 at 04:41 PM.
#4
Honda-Tech Member
Join Date: Mar 2007
Location: ROLL TIDE, USA
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new 87 CRX SI
Heck yeah, nice Hond! Engine bay a lil rough but maaan that body is in great shape for these cars. That nose is all lined up real nice and I didn't notice any cracks. The factory front air dam will make it look even better if you can find one
Trending Topics
#10
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new 87 CRX SI
The car has this stupid Ricer Steering wheel... Probably gonna go back to OEM....
http://cgi.ebay.com/ebaymotors/1986-...Q5fAccessories
http://cgi.ebay.com/ebaymotors/1986-...Q5fAccessories
#11
Honda-Tech Member
Join Date: Mar 2007
Location: ROLL TIDE, USA
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new 87 CRX SI
RS Type lol..Basket case on the interior huh GL with that. I'm in the process of tearing one down for parts, lemme know if I can help.
#13
Honda-Tech Member
Join Date: Mar 2007
Location: ROLL TIDE, USA
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new 87 CRX SI
Got one but its rough. This car was hit hard on driver side, so no window glass, so before I got to it it had sat for a decade in the weather
#15
Honda-Tech Member
Thread Starter
Join Date: Apr 2010
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new 87 CRX SI
The shitty fuel pump... I couldn't get the damper off, since I didn't have my larger wrenches... had to leave it sit over night..
Current interior with that stupid riced steering wheel.
Current interior with that stupid riced steering wheel.
#16
Re: My new 87 CRX SI
Dude I just bought an 87 crx si for 400 bucks and its all stock but any ways those rims throw some paint stripper on them and they look great polished if your not going to rim it up I am currently looking for body kits for mine its hard to find body parts for them if any one can help shoot me a pm
#18
#24
Honda-Tech Member
Join Date: Mar 2007
Location: ROLL TIDE, USA
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new 87 CRX SI
Front ride height is adjusted by turning bolt #33 in this pic. http://www.hondaautomotiveparts.com/...RONT+LOWER+ARM
use a tape measure between the bottom of the fender & top of the tire for reference; will post spec 2moro
sorry its a blow-up parts diagram not a pic.. will maybe get on that 2moro
I have a tail light, no fender, tail light is rough, will post pic 2moro