CRX Turbo and water/air upgrade
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Cottonwood, AZ, USA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
CRX Turbo and water/air upgrade
The little old T3 started smoking pretty bad, so instead of rebuilding it I upgraded to a T3/To4e. Also upgraded from air/air intercooling to water/air. The water to air system holds about 1.5 gallons and flows 8 gpm and has a 7" fan on the heat exchanger and stays realy cold, and on race day I can fill the reservoir up with ice.
So I filled up the reservoir with ice after work today to see what happend, I was pleased. The picture shows the cooling potential if I ice it between races
So I filled up the reservoir with ice after work today to see what happend, I was pleased. The picture shows the cooling potential if I ice it between races
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Cottonwood, AZ, USA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: CRX Turbo and water/air upgrade
Yes it is a real 9 peice mugen kit, and no I didnt cut out the front two peices in the bumper, the whole lower front was broken out and missing so I just glassed in a peice across the bottom.
#6
Honda-Tech Member
Join Date: Feb 2009
Location: Oregon
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Re: CRX Turbo and water/air upgrade
thats way cool! deffinitely want to see more pics, the engine setup, and some more of the body. i have an '84, and when i get some more dough and more educated ive been wanting to do something similiar.
#7
Honda-Tech Member
Re: CRX Turbo and water/air upgrade
Nice car! Love to see you and your car at the Torsion Bar Meet in Las Vegas next week.
https://honda-tech.com/forums/classic-hondas-106/vegas-meet-saturday-march-21st-tortion-bar-meet-2480823/
Scott
https://honda-tech.com/forums/classic-hondas-106/vegas-meet-saturday-march-21st-tortion-bar-meet-2480823/
Scott
Thread
Thread Starter
Forum
Replies
Last Post
crxaddikt
Honda CRX / EF Civic (1988 - 1991)
3
03-18-2013 03:10 PM
allhonda
Welding / Fabrication
14
01-16-2009 05:07 AM