HondaSkyline87

Just thought I would let you all inside this motor swap in progress. Started off not knowing what this would entail and has now became in just a week to this point already. As you can see below that yes, I am putting a JDM F20B out of a Honda Accord SiR-T and putting a S2000 gauge cluster. Buying this motor was the greatest thing I have done since I got this accord. It came with Jasma Mugen headers and exhaust for just around 2K. I was majorly happy with this purchase after seeing those stainless steel headers and exhaust. There has been alot of set backs and alot of breakthroughs we have found. Like just today we got some axles off a 89 Acura integra and got a half shaft out of a 93 accord and now we have the front suspension all back together. It all fit like it was meant to be there. We tried to do a cable clutch and that didnt work(it was worth a shot). So we thought we might as well go back to the hydro clutch setup that was originally in there. Everything from the shifter linkage to the motor mounts to sectioning and lowering the cross member is all custom. From all the research me and my father have done, no one has done this swap successfully except one person in thailand. So this is a great opportunity for me and my father to show the honda community that this can be done. Sorry i've been babbling heres alot of pics













Then pulled in and out to make sure it fits well and gave it a new paint job in the engine bay






This is where we stand right now. The front suspension is back in and fully placed. All thats left to do is the hydro clutch, some vaccum lines and the ac line and the wiring of the engine and gauge cluster. Next for the project later this year is a turbo addition along with the blow off valve and new chipped ecu. Planning on 8-10 pounds of boost.

oneoffaccord

i like where did is going but one thing i dont like how you painted the bay. EVERYTHING is painted. you didnt tape up and hoses or wires. just sprayed the color. all in all im digging it

HondaSkyline87

I just figured i would rather have it ALL look silver instead of black hoses cause im doing it to look clean and im doin a wire tuck too.

89_accord

WOW that awesome! I haven't seen you on 3geez.com, you should join and I'm sure they would love it if you shared your knowledge!

HondaSkyline87

Hello everyone again just giving an update of the car as of right now. All ECU wiring is done the hydro clutch has been fixed and started it for the first time yesterday. heres a video for your viewing pleasure: http://www.youtube.com/watch?v=accTuzG6vKE&feature=plcp

all thats left now is the gauge cluster, the fan for the radiator, the O2 sensor being put on and lastly putting everything back together. I might even have a test drive video up this weekend too.

StreetsideStig

O_O I just...this is AWESOME!

I love the look, the thing sounds amazing, and it's really cool you get to work on it with your dad. Cheers!

HondaSkyline87

And here for your viewing pleasure is the first drive videos of the sweet and delicious F20B swapped Honda Accord )))))

http://www.youtube.com/watch?v=rxxut6lAxk4&feature=plcp
http://www.youtube.com/watch?v=cUlnTagHjog&feature=plcp
http://www.youtube.com/watch?v=JfQmtAGmqR4&feature=plcp
http://www.youtube.com/watch?v=oScPExQoMnQ&feature=plcp

northwests

Very nice. Need some better quality videos though. You did a good job

StreetsideStig

Awesome! Sounds like some little kid yelling about the Po-Po in the third one.

Also, tell your friend who shot the fourth one:

http://www.youtube.com/watch?v=Bt9zSfinwFA

TurboRob

Whoever shot that vert video thing has way too much time on their hands

RazoE

car's beast, just needs a new paint job that isnt so flashy! i love sleepers.

StreetsideStig

I don't know. It has, like, 1.8 million views. They're probably making bank.

89_accord

Oh man keep up the great work!

HondaSkyline87

Heres a update from me. got my 2 step goin on now! more videos to come very soon

StreetsideStig

Sounds mean!

2ndGenGuy

Very clean and professional looking build! Excellent work all around!

hondalude86

just watch your oil pan clearances!!

senor honda

Loggin in so I can keep up with the updates.-Bob

northwests

No updates yet guys. Saving up for my new stage 2 clutch and turbo setup. Stay tuned!