1st gen CRX sheet metal
#1
1st gen CRX sheet metal
I am looking for floor sections, I've struck out one way or another with the vendors I can link to from here. My passenger floor was worse than I thought, the undercoating hid some rust. I can fab, but I'd rather cut and replace with a pre-fabbed piece. Any suggestions? Thanks, Mike
#3
Honda-Tech Member
Join Date: Aug 2001
Location: Havelock, NC, USA
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1st gen CRX sheet metal
Double check with your Honda dealer and ask them to check Vintage Parts. Even though most parts for our cars are discontinued there is sometimes stock still floating around in the system. The front floor for the hatchback still shows as a Vintage Parts item. But, I can about promise it won't be cheap.
#4
Honda-Tech Member
Join Date: Sep 2006
Location: tulsa, ok, usa
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1st gen CRX sheet metal
Double check with your Honda dealer and ask them to check Vintage Parts. Even though most parts for our cars are discontinued there is sometimes stock still floating around in the system. The front floor for the hatchback still shows as a Vintage Parts item. But, I can about promise it won't be cheap.
Thread
Thread Starter
Forum
Replies
Last Post
joshd_bh
Honda CRX / EF Civic (1988 - 1991)
11
12-18-2012 07:31 AM
1st, bike, crx, cycle, floor, gen, generation, honda, metal, motorcycle, motorcycles, parts, replace, sheet, sheetmetal, vintage