pepebuho

Hi.
The 2-way transmiter for the Viper 5002 has nice icons for showing what type of sensor was activated. for example if Zone 2 (shock) is activated you see like a hammer hitting the car on the remote control.

My question is How do I like the other icons to the corresponding Zones?

I have a Tilt Sensor (507M), a glass breakage (506T) and the motion sensor (AU94Tm).

507M goes into Zone 6 (Hood Pin input),
506T goes into Sensor 2 input
AU94Tm goes into Sensor 3 input

Whenever one goes off, the corresponding zone number shows on the transmitter screen, but not the Icon. How do I link zone number to Icon?

I have read twice the manual and it is not clear, neither on the owners manual nor in the installation manual.

Javier

wrx-killer-Sti-eater

iTrader: (1)

The remote will not show glass being broke or a car being tilted

B18C_EJ8

If you wire the glass break sensor into the shock sensor input wire (and diode isolate), wouldn't that show the hammer icon on the remote??

JLEK

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C_EJ8 &raquo;</TD></TR><TR><TD CLASS="quote">If you wire the glass break sensor into the shock sensor input wire (and diode isolate), wouldn't that show the hammer icon on the remote??</TD></TR></TABLE>

the 5002 have builtin shock sensor.

pepebuho

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C_EJ8 &raquo;</TD></TR><TR><TD CLASS="quote">If you wire the glass break sensor into the shock sensor input wire (and diode isolate), wouldn't that show the hammer icon on the remote??</TD></TR></TABLE>
Yes, I imagine it would happen. But i want that when the tilt sensor is fired, the Tilt indicator in the remote also goes off instead of only showing the zone number, likewise, when the glass break sensor is fired, I want the icon for the glass break sensor to show up, same thing for the motion sensor.

So far, only the shock sensor and the doors open icons show up.

For an example of what I am talking about you can see
(I hope the won't mind my linking to their image)


Modified by pepebuho at 4:52 PM 5/16/2007


Modified by pepebuho at 4:54 PM 5/16/2007


Modified by pepebuho at 4:55 PM 5/16/2007

JSPECSIR

last time i talked to a dei tech you have to set those icons with a bitwriter.

suspendedHatch

I like the "wheel falling off" sensor.

prjct92eh2

i have the same sensors and was wondering the EXACT same thing. looks like i'll try to find somebody local with a bitwriter.

pepebuho

I feel dumb. The installation manual does not mention that at all (JSPECSIR). Time to look for a tech with a 998T that has halve an idea what it is useful for.