"The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
#79
Honda-Tech Member
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Damn, so bad ***! Does this qualify for the largest Honda engine bay? That's some space in there!
#81
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Thanks man!
Thank you, Sean
Thanks!
Thanks man, love your Integra build!
Bay has so much more room once you get rid of all that extra "garbage" as I call it haha.
Thanks man, I love the Honda styling in the 88-91 era.
Some might know this car is much farther along than this thread depicts but I had been dealing with a no start issue for quite awhile on this car.
I think about everything that was supposed to be a "bolt-on" has tuned into the complete opposite of that.
Turns out my Rywire harness had 3 wires pinned wrong. If I recall the cam and crank positions were 2 of them. Had them repinned and running by 9am the day I took it in.
Once it was running we discovered my water pipe was leaking and cracked where I had the factory h22 oil cooler lines welded shut.
Then discovered a massive vacuum leak on the intake manifold. The QSD Plate was hitting the head before making complete contact. trimmed that down to only discover Hondata thermal gaskets are garbage and don't seal worth a ****.
Car was supposed be tuned and out the door Tuesday night but I didn't take it home until Thursday. End vent.
Car also had a caliper lock up on the dyno so we were not able to complete the full tune for awhile. I drive it home that day...
In the meantime I fixed the brakes and took her to the dealership for an alignment.
Took the car back for that final tune and intake build
car made 180whp on a dyno jet. Low, but oh well. Runs good, sounds good, pulls good. No complaints here.
Thank you, Sean
Thanks!
Bay has so much more room once you get rid of all that extra "garbage" as I call it haha.
Some might know this car is much farther along than this thread depicts but I had been dealing with a no start issue for quite awhile on this car.
I think about everything that was supposed to be a "bolt-on" has tuned into the complete opposite of that.
Turns out my Rywire harness had 3 wires pinned wrong. If I recall the cam and crank positions were 2 of them. Had them repinned and running by 9am the day I took it in.
Once it was running we discovered my water pipe was leaking and cracked where I had the factory h22 oil cooler lines welded shut.
Then discovered a massive vacuum leak on the intake manifold. The QSD Plate was hitting the head before making complete contact. trimmed that down to only discover Hondata thermal gaskets are garbage and don't seal worth a ****.
Car was supposed be tuned and out the door Tuesday night but I didn't take it home until Thursday. End vent.
Car also had a caliper lock up on the dyno so we were not able to complete the full tune for awhile. I drive it home that day...
In the meantime I fixed the brakes and took her to the dealership for an alignment.
Took the car back for that final tune and intake build
car made 180whp on a dyno jet. Low, but oh well. Runs good, sounds good, pulls good. No complaints here.
#84
Honda-Tech Member
Join Date: May 2008
Location: Portrush, Antrim, Northern Ireland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Good to see it running, things never go quite right at first with project builds, they always test us to the last minute.
#85
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
I have some "finished" shots but I shall wait for a new page to post all of those.
#86
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Just got some fantastic pictures from my good friend Justin!
Some I snapped. Not sure what's up with the quality on mine. Photobucket screwed them up or my camera settings need to be played around with.
Some I snapped. Not sure what's up with the quality on mine. Photobucket screwed them up or my camera settings need to be played around with.
#89
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
#91
Daughter not possible
Join Date: Sep 2007
Location: In a lake of vaginal juices
Posts: 1,742
Likes: 0
Received 3 Likes
on
3 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Wow. This has has to be within top 3 of 3rd gen Preludes ever built.
Car is immaculate.
Hey, if we ever make to a same event, i.e. IA, I also have a Prelude F20B on CE28's. I think it'd be a good photo op.
Car is immaculate.
Hey, if we ever make to a same event, i.e. IA, I also have a Prelude F20B on CE28's. I think it'd be a good photo op.
#92
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Thanks guys, I will be at Summer IA this next summer for sure!
#95
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
#96
Honda-Tech Member
Join Date: Apr 2003
Location: West Chester, Pennsylvania
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
Re: "The World Has and Never Will Require 4ws" Rywire/Bisimoto/HybridRacing
Just revisited the thread and man the car came out phenomenal. Great work, well done.
#97
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
#98
Honda-Tech Member
Join Date: Apr 2003
Location: West Chester, Pennsylvania
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts