My eg build finally ready to start
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Las Cruces NM
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
My eg build finally ready to start
Well Im finally ready to begin with my project, is been over 2 years since I started this project, but because of school (in other words I was broke) I could not begin this. And I want to share this build with other fellow honda lovers. At first I was going to build the engine and install a turbo kit, but then I realized that the car needed new paint. I was able to get a few suspension parts and a good set of tires since I needed them.
Here are some pics I took with my phone that show the progress so far
Here is the car when I first got it.
With 17's
The rear disc conversion
I got a good deal on a front and rear sway bar and ASR subframe
I painted the valve cover with the wrinckle VHT paint and it came out
nice
A nice set of 15's that needed new rubber bad
New exhaust
At the shop when I installed the ws2 exhaust
This is how it looked a month ago
Before I started to remove everything to take the car to the paint shop,
I removed the old radiator support and installed the oem one.
After I removed engine and transmission
Stripped off the interior
I decided to replace the clutch with exedy stage 1 and fidanza flywheel
Ready to take it to the shop
I will upload more pics showing the progress. I still dont know what color I want. I would like to paint it milano red or roma red, but I am still thinking about it.
Here are some pics I took with my phone that show the progress so far
Here is the car when I first got it.
With 17's
The rear disc conversion
I got a good deal on a front and rear sway bar and ASR subframe
I painted the valve cover with the wrinckle VHT paint and it came out
nice
A nice set of 15's that needed new rubber bad
New exhaust
At the shop when I installed the ws2 exhaust
This is how it looked a month ago
Before I started to remove everything to take the car to the paint shop,
I removed the old radiator support and installed the oem one.
After I removed engine and transmission
Stripped off the interior
I decided to replace the clutch with exedy stage 1 and fidanza flywheel
Ready to take it to the shop
I will upload more pics showing the progress. I still dont know what color I want. I would like to paint it milano red or roma red, but I am still thinking about it.
#4
Honda-Tech Member
Join Date: Mar 2010
Location: Buffalo Area
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
Always loved EBP on EG hatches, also cant go wrong with a nice black. Either way nice progress, I was worried when I saw the 17's but it got better.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Las Cruces NM
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
About a year ago I tried to tow the car and the support bent, so
I bought a cheapo one to fix it fast, It was the taiwanese one, not the oem.
I was going to paint it like that but I saw the oem for sale on craigslist
and I got it, I prefer to have the oem.
I bought a cheapo one to fix it fast, It was the taiwanese one, not the oem.
I was going to paint it like that but I saw the oem for sale on craigslist
and I got it, I prefer to have the oem.
#11
Honda-Tech Member
Join Date: Oct 2009
Location: northeast
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
nice build so far ,what color you painting the car? i also like the vht paint i actually found a wrinkle gray that discontinued the other day. cant wait to paint mine
#12
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Las Cruces NM
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
Yes the VHT paint looks really nice, you are not going be disappointed.
#14
Honda-Tech Member
Join Date: Oct 2009
Location: northeast
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
yeah i used the black on one valve cover and it came out really nice , i wanted red like yours but all the stores in ct are sold out,so i wound up with wrinkle gray. i havent seen any w. gray
#15
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Las Cruces NM
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
UPDATE
I decided to paint the car milano red, here are some pics showing the progress.
some items had to be replaced such as the front bumper and the hood
I am going to start putting everything together this weekend and will upload more pics
I decided to paint the car milano red, here are some pics showing the progress.
some items had to be replaced such as the front bumper and the hood
I am going to start putting everything together this weekend and will upload more pics
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Las Cruces NM
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
I was able to put everything back in the car and also I got some goodies
I gave away my cold air intake and forgot to buy one so I used a vacuum filter hehe
and used it like that just to take the car home
The new intake
While I was working on it I discover that the intake manifold had a crack
so I got a skunk2 intake on craigslist with a Hondata gasket but they did not fit
because they are for a b16, the guy told me it was for the gsr and stupid me I did not check it until I was going to install it..so now I have an skunk2 mani for sale with Hondata gasket
Si I decided to get a new Intake and got the skunk2 mani
I also got the duckbill
a new shift ****
Before
After
This is how it looks as of today
I want to drop it because I dnt like the way it sits right now but I dnt know what to get.
I currently have the tokico blues and they are nice I like how they ride but I want to drop it more. I also want to be able to adjust the height, I dnt take the car to the track, but once in a while would be nice. Since the car is my DD I want something that is not bouncy or too stiff. I was thinking Function and Form Type 1's since I have read good things about them what do you guys think? your input would be appreciate it thanks
I gave away my cold air intake and forgot to buy one so I used a vacuum filter hehe
and used it like that just to take the car home
The new intake
While I was working on it I discover that the intake manifold had a crack
so I got a skunk2 intake on craigslist with a Hondata gasket but they did not fit
because they are for a b16, the guy told me it was for the gsr and stupid me I did not check it until I was going to install it..so now I have an skunk2 mani for sale with Hondata gasket
Si I decided to get a new Intake and got the skunk2 mani
I also got the duckbill
a new shift ****
Before
After
This is how it looks as of today
I want to drop it because I dnt like the way it sits right now but I dnt know what to get.
I currently have the tokico blues and they are nice I like how they ride but I want to drop it more. I also want to be able to adjust the height, I dnt take the car to the track, but once in a while would be nice. Since the car is my DD I want something that is not bouncy or too stiff. I was thinking Function and Form Type 1's since I have read good things about them what do you guys think? your input would be appreciate it thanks
#18
Honda-Tech Member
Re: My eg build finally ready to start
nice
a buddy of mine like his type1's over the koni/gc setup.
if your tight on cash, look at the progress cs-II. im running that right now and i love it. not too stiff. not soft at all. and it cost about 600 shipped.
look in the sponsors marketplace.
a buddy of mine like his type1's over the koni/gc setup.
if your tight on cash, look at the progress cs-II. im running that right now and i love it. not too stiff. not soft at all. and it cost about 600 shipped.
look in the sponsors marketplace.
#21
Honda-Tech Member
Join Date: Jul 2011
Location: Toulouse, France
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
Good job and very clean
This color is very nice when brand new !
Your car will be perfect a bit lower and with a SiR front lip.
This color is very nice when brand new !
Your car will be perfect a bit lower and with a SiR front lip.
#23
Honda-Tech Member
Join Date: Oct 2009
Location: northeast
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
do you care that you painted the windsheild black plastic border red? Lol cause it would bug me , looking good though ,like the valvecover
#25
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Las Cruces NM
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: My eg build finally ready to start
do you care that you painted the windsheild black plastic border red? Lol cause it would bug me , looking good though ,like the valvecover