GreatWave's not-so-jdm Integra build
#259
Re: not_so_jdm_eh2's not-so-jdm Integra build
Thanks dude.
So I'm up in the air about putting my set of B16 pistons in the GSR. I really don't remember if I bought PR3 or P30, and that's where my hesitation is coming from. Looks like I'm gonna have to tear down my old LS block and see what I have.
So I'm up in the air about putting my set of B16 pistons in the GSR. I really don't remember if I bought PR3 or P30, and that's where my hesitation is coming from. Looks like I'm gonna have to tear down my old LS block and see what I have.
#264
Re: not_so_jdm_eh2's not-so-jdm Integra build
We'll see how these do after work tonight. Our parking lot at work isn't very level, so I kind of eyeballed everything for the time being. It's hard to pick up the blue in this light, but it's still very much there.
#269
Re: not_so_jdm_eh2's not-so-jdm Integra build
I went to dad's shop tonight to change a starter and aim these headlights.
Pre-aiming:
Starter shorted itself out somehow...
Post-aiming:
They're a little high, but that's a pretty easy fix. Hopefully I didn't suffer any real electrical damage. I replace the power lead to the starter from the battery, and the ground from battery to chassis, and trans to chassis. That's all the damage I've found so far, and the alternator is still putting out 14 volts. It seemed fine the whole 45 minute ride home.
Pre-aiming:
Starter shorted itself out somehow...
Post-aiming:
They're a little high, but that's a pretty easy fix. Hopefully I didn't suffer any real electrical damage. I replace the power lead to the starter from the battery, and the ground from battery to chassis, and trans to chassis. That's all the damage I've found so far, and the alternator is still putting out 14 volts. It seemed fine the whole 45 minute ride home.
#271
Honda-Tech Member
iTrader: (2)
Re: not_so_jdm_eh2's not-so-jdm Integra build
I had my starter attempt to short itself out on my car too, it was the ground wire from the trans to the chassis. It finally fell apart after 21 years of service lol.
i am really impressed with how those lights turned out, they look awesome. great job!
i am really impressed with how those lights turned out, they look awesome. great job!
#272
Re: not_so_jdm_eh2's not-so-jdm Integra build
I wound up replacing the battery to chassis strap, trans to chassis strap, and power from the battery to fuse box and starter. I haven't noticed any other damage, but I think I'll swap in a new harness just to be safe. I'm seriously happy with my lights though. Once I bring them back down they'll be great. Stock projectors with a clear lenses and 6500 Kelvin kit from TRS.