Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
#54
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
well if you decide to run gutted go for a miracle : ) hopefully ill see the car around NY when its done
#56
#58
#62
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
This is my planned set up at the moment will see what happens. I am hoping for a solid 270-280 hp.
K24 block bored to 87.5
Wiseco Pistons
Eagle Rods
ARP Headstuds
Type S oil pump
Cometic headgasket
K20a2 head
Super tech Valve springs and retainers
Drag cartel stage 4 cams
Hondata IMG
Hondata K-Pro
RBC Intake Manifold (ported? Maybe 70mm tb)
hytech replica header
EP3 5 speed trans
Competition Clutch flywheel
Competition Clutch
RDX injectors
Hybrid Fuel Rail
Walbro 255
Aeromotive fuel pressure regulator
Aeromotive in-line fuel filter
If any one has some suggestions let me know!
K24 block bored to 87.5
Wiseco Pistons
Eagle Rods
ARP Headstuds
Type S oil pump
Cometic headgasket
K20a2 head
Super tech Valve springs and retainers
Drag cartel stage 4 cams
Hondata IMG
Hondata K-Pro
RBC Intake Manifold (ported? Maybe 70mm tb)
hytech replica header
EP3 5 speed trans
Competition Clutch flywheel
Competition Clutch
RDX injectors
Hybrid Fuel Rail
Walbro 255
Aeromotive fuel pressure regulator
Aeromotive in-line fuel filter
If any one has some suggestions let me know!
#67
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
Here are some pics of the bay which I have been sanding and taking all of the body paste off of.
You can see part of the head light harness that is almost done. Will get pics of that when its all said and done.
These holes will be welded along with a few other tiny ones on the firewall from removing the brackets.
Pic of the studs getting ready to grind then all off. Taping up the lines so no sparks get in there!
Some of the studs removed need to get them all flush to the fire wall.
You can see part of the head light harness that is almost done. Will get pics of that when its all said and done.
These holes will be welded along with a few other tiny ones on the firewall from removing the brackets.
Pic of the studs getting ready to grind then all off. Taping up the lines so no sparks get in there!
Some of the studs removed need to get them all flush to the fire wall.
#68
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
How are you doing the brake line routing? Looks great though, not having those studs really clean up nice. Good work!
#71
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
Im trying to work out something for tucking the clutch line still.
Damn shocked you are even on here.
#74
Honda-Tech Member
iTrader: (2)
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
This is my planned set up at the moment will see what happens. I am hoping for a solid 270-280 hp.
K24 block bored to 87.5
Wiseco Pistons
Eagle Rods
ARP Headstuds
Type S oil pump
Cometic headgasket
K20a2 head
Super tech Valve springs and retainers
Drag cartel stage 4 cams
Hondata IMG
Hondata K-Pro
RBC Intake Manifold (ported? Maybe 70mm tb)
hytech replica header
EP3 5 speed trans
Competition Clutch flywheel
Competition Clutch
RDX injectors
Hybrid Fuel Rail
Walbro 255
Aeromotive fuel pressure regulator
Aeromotive in-line fuel filter
If any one has some suggestions let me know!
K24 block bored to 87.5
Wiseco Pistons
Eagle Rods
ARP Headstuds
Type S oil pump
Cometic headgasket
K20a2 head
Super tech Valve springs and retainers
Drag cartel stage 4 cams
Hondata IMG
Hondata K-Pro
RBC Intake Manifold (ported? Maybe 70mm tb)
hytech replica header
EP3 5 speed trans
Competition Clutch flywheel
Competition Clutch
RDX injectors
Hybrid Fuel Rail
Walbro 255
Aeromotive fuel pressure regulator
Aeromotive in-line fuel filter
If any one has some suggestions let me know!
#75
Re: Crazyjetsfan22’s “Ek” hatch build! Lots of pics!
Picked up a few parts just never posted the pics up.
Here is a k24a4 block will be cleaned well and get bored out to 87.5
Here is a type s head I picked up. Looking to get some Drag cartel stage 4 cams and some supertech valve springs, retainers, and keepers ect.
Few other small things I have Rsx type-s engine harness and charge harness and coil packs
K20a2 water pump ,alternator, ep3 idle pulley and k24 crank pulley
Spare k series valve cover I have (I am unsure what color to powder coat this. Not sure if I want to do the Teal again or switch it up) and k24 chain cover need to clean this good and replace the bottom seal.
Here is a k24a4 block will be cleaned well and get bored out to 87.5
Here is a type s head I picked up. Looking to get some Drag cartel stage 4 cams and some supertech valve springs, retainers, and keepers ect.
Few other small things I have Rsx type-s engine harness and charge harness and coil packs
K20a2 water pump ,alternator, ep3 idle pulley and k24 crank pulley
Spare k series valve cover I have (I am unsure what color to powder coat this. Not sure if I want to do the Teal again or switch it up) and k24 chain cover need to clean this good and replace the bottom seal.