91 Civic Sedan> in the making?!
 

TABLE OF CONTENT IS DOWN DUE TO POST COUNT BEING BACK TO 25. MESSED MY SHIT UP LOL!!
Updated Pix 5/09/09
http://img.photobucket.com/albums/v6..._3671sized.jpg

March 01 2010
http://img.photobucket.com/albums/v6...n/_MG_4764.jpg

October 10th 2010
http://img.photobucket.com/albums/v6...n/IMG_1520.jpg

THEN this thread took a path to an Endless Road =)
http://img.photobucket.com/albums/v6...n/IMG_5046.jpg

Thread Started 1-27-2007

i just bought a 91 honda civic sedan. its salvage dude to a lil accident at the front passenger side, lil frame bent but everything still sits right.

car came with:
all four blown shocks
no corner lights
88-91 Si seats (no tear)
no rear trunk carpet or quarter panel carpet.
14' blackouts with falkens azenis with barely any treads left.
3of4 door locks are broken
no exhaust system
several dinks and Dents here and there


the thing about the car is that it came with a stock beat up b20b with a crack b16 tranny. and an Aem intake with 3 nitrous ports (holes) on it. which it needed state ref for. apparently i got it cleared and it didnt need one.

car cost me 1500 dollars cash.

heres some pix

https://i74.photobucket.com/albums/i...%20sedan/2.jpg

how i first got it.

https://i74.photobucket.com/albums/i...%20sedan/3.jpg

the b20 engine, the aem intake with the nitrous holes, those aftermarket headers are 2 piece. and the second piece (downpipe) was an h22 and it wasnt even connected so its was like driving with open headers.

ill get some more pix up of whats coming next.

Re: 91 Civic Sedan> in the making?! (My_EFsedan)
 

nice good luck on your build! so youre saying a b20b passed the states ref? just stock?

Re: 91 Civic Sedan> in the making?! (My_EFsedan)
 

yessssss https://honda-tech.com/forums/images/smilies/emthup.gif nice start

Re: 91 Civic Sedan> in the making?! (DarrinM)
 

i personaly think you got burned. and theres no way that a b20 will smog in that car no way no how.

Re: 91 Civic Sedan> in the making?! (e jay one)
 

the car, i just got it smogged 3 days ago for o7 tag, so im good for 2 years.
the car didnt go state ref, i was cleared so that i didnt have to do.
so the car i got it last year on dec 8th

got some pix of wat is done to car. ill post lil my lil

https://i74.photobucket.com/albums/i...n/IMG_0015.jpg
https://i74.photobucket.com/albums/i...n/IMG_0055.jpg
got some hub caps to make the car look stock/sleeper. SJ cali, cars are getting cracked down hard here.

https://i74.photobucket.com/albums/i...n/IMG_0008.jpg
got some rear mudflaps off a ef civic hatchback

https://i74.photobucket.com/albums/i...sedan/wow4.jpg
got a new exhaust, 2.5 inch pipe for my b20 to flow well. new muffler new regsinator and cat.

also got some tokico white illuminas gas shocks (4) with some coilover (rides smooth) picked these up from a fresh DA at the pick n pulls for 150. non-blown

https://i74.photobucket.com/albums/i...20sedan/10.jpg

droppped about 2 finger between the tires and fender well.

ill get some more pix today

Re: 91 Civic Sedan> in the making?! (My_EFsedan)
 

car is looking good https://honda-tech.com/forums/images/smilies/emthup.gif

Re: 91 Civic Sedan> in the making?! (JKGONZALEZ3)
 

Hey whats the interior look like?

Re: 91 Civic Sedan> in the making?! (143MYVTECEF)
 

interior:

https://i74.photobucket.com/albums/i...n/IMG_0002.jpg
https://i74.photobucket.com/albums/i...edan/seats.jpg

88-91 Si seats

https://i74.photobucket.com/albums/i...dan/integ3.jpg
https://i74.photobucket.com/albums/i...edan/integ.jpg
https://i74.photobucket.com/albums/i...dan/integ2.jpg

94-01 integra center console. it aligns but besides the gap in the front


https://i74.photobucket.com/albums/i.../rearseats.jpg

stained rear seats

https://i74.photobucket.com/albums/i...edan/wheel.jpg
https://i74.photobucket.com/albums/i...edan/quick.jpg
https://i74.photobucket.com/albums/i...edan/front.jpg

NRG quick release, i had to order a 5 hole pattern for my GT Grant steering wheel cause i cant afford the Sparco or momo.

http://www.intakeone.com/Inter....html
for people who has a 5 hole pattern like mines and not a 6 hole pattern like momo/sparco


https://i74.photobucket.com/albums/i...%20sedan/5.jpg

got some bumper corners and i still need the fender corner lights

https://i74.photobucket.com/albums/i...%20sedan/6.jpg

now before i even put on those tokico shocks i found out that the car came with a Rigs suspension (ghetto) dirver side had an integra kunckle assembly and passenger side with a civic knuckle assembly

https://i74.photobucket.com/albums/i...%20sedan/7.jpg

i was putting on my tranny from the crx (bro gave me for xmas) along with his hasport motor mounts cause mines was tearing, it now has the crome mounts that hasport had for 6 bills back in the days, i decide to take out his engine as well because hes not in the scene anymore.

https://i74.photobucket.com/albums/i...%20sedan/8.jpg

i have the J1 tranny from japans 95 delsol, its optional cause it also comes in hydro

https://i74.photobucket.com/albums/i...IMG_0002-1.jpg

heres the engine bay currently, i took out the blue aem intake with the nitrous holes and out on a carb legal red aem intake, replaced the radiator with brackets (old pix of engine bay had zipties) got LS headers with heatshield, for some batteriy bracket and the lil red rubber that goes on the positive wire.

more pix in a bit


Modified by My_EFsedan at 8:40 PM 1/29/2007

Re: 91 Civic Sedan> in the making?! (My_EFsedan)
 

nice project dude, i have a thing for the four door. NICE! https://honda-tech.com/forums/images/smilies/emthup.gif

Re: 91 Civic Sedan> in the making?! (psikotc)
 

Lose the theft magnet tach and install another cluster https://honda-tech.com/forums/images/smilies/emwink.gif Besides that, I'm feeling those seats.

Re: 91 Civic Sedan> in the making?! (DarrinM)
 

https://honda-tech.com/forums/images/smilies/emthup.gif

I love the look of that engine, its so clean. and sleeperific!

Re: (~sp33~)
 

got sidemarkers from password jdm for 37 with lightbulb wires etc, in 5 days i recieved it.

relocated my license plate with an eg bracket, its bolted on no screwed onto the molding like some ppl do.

https://i74.photobucket.com/albums/i...0sedan/581.jpg
https://i74.photobucket.com/albums/i...0sedan/wow.jpg
https://i74.photobucket.com/albums/i...sedan/wow2.jpg
https://i74.photobucket.com/albums/i...sedan/wow3.jpg
https://i74.photobucket.com/albums/i...20sedan/58.jpg

Random pix

thing is my house has the whole ef squad.

https://i74.photobucket.com/albums/i...sedan/wago.jpg

mines and the wago (bros)

https://i74.photobucket.com/albums/i...dan/fambom.jpg
https://i74.photobucket.com/albums/i...viewphoto4.jpg
https://i74.photobucket.com/albums/i...viewphoto3.jpg

The Real Family EF squad (hatch crx sedan & wagon)

Re: (My_EFsedan)
 

looks good man, i like how its coming along nicely

Not to be an ass but your indicators are way too high. Any pics of your sisters 4 door? Looks good.

Ill have a whole family of my own one day https://honda-tech.com/forums/images...es/emsmile.gif

Re: (~sp33~)
 

my indicator is high? lol, whats that?, well my sisters car i dont have pix of it, its an automatic everything stock, she got the car painted super sonic blue in and out

Re: (My_EFsedan)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by My_EFsedan &raquo;</TD></TR><TR><TD CLASS="quote">my indicator is high? lol, whats that?</TD></TR></TABLE>

Your side marker.

I like your car dude, i wish i had a sedan for a DD...maybe one day https://honda-tech.com/forums/images...s/emsmilep.gif

Re: (Cheeech)
 

o0h ok, well i like it that way, cause to me, it looked kind of weird close to my moldings

http://www.jdmuniverse.com/for...arker

i followed through this for ef8 and ef9 sidemarkers, i cut it the way it is on the diagram but a lil more away and up more..like this ( note that those inches are the length of the outside of the sidemarker, not the cutout)

https://i74.photobucket.com/albums/i...sedan/side.jpg

Re: (My_EFsedan)
 

Good looking project! Very clean 4 door and keep us updated!

Re: (mr_hahn73)
 

ill keep yall updated, im still waiting on getting my stickers on down my window( ef sedan squad, i &lt;3 jdm/honda etc), then im looking to get the 1st gen integra front lip on and do the 50$ paintjob as a thread stated on HT. an hoping i can get enough mula for rota track Rs in '16 white

Re: (My_EFsedan)
 

aha yeah the real EF family https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emwink.gif

Re: (KNoTTo)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KNoTTo &raquo;</TD></TR><TR><TD CLASS="quote">aha yeah the real EF family https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emwink.gif </TD></TR></TABLE>

https://i74.photobucket.com/albums/i...people/4-1.jpg
https://i74.photobucket.com/albums/i...people/3-1.jpg

yes!

nice man, i like it.

keeping the car maintained well! that is top priority!

Re: (allsho)
 

Nice build... gota love the EF sedans.. i just picked one up in december and LOVE it.. im building a B20 v-tec for it once i finish my crx build (boosted dohc zc that is semi built) did ur bro ever sell his crx shell? i have seen it on CL a lot

Re: (xx89civicracer89xx)
 

Out of curiosity, how did you manage to smog a b20? Clean 4 door btw, and good luck with the build! https://honda-tech.com/forums/images/smilies/emthup.gif