**skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#51
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (pkdog167)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pkdog167 »</TD></TR><TR><TD CLASS="quote">just lower half of one of my door, it probably take two big cans or about 5 small cans.. and the small one are a lot more expensive then the big one.</TD></TR></TABLE>
Ah that sucks dude. But it is ridiculous how much more the small cans cost! I went through 9 on my lip. It would have been soo much nicer to have like 3 big cans lol. GL with the painting
Ah that sucks dude. But it is ridiculous how much more the small cans cost! I went through 9 on my lip. It would have been soo much nicer to have like 3 big cans lol. GL with the painting
#52
Honda-Tech Member
Join Date: Apr 2007
Location: Dirty Jerz!
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skipunk4)
yeh, heres a couple pics since u asked. I didnt wanna thread jack
back in winter
spring
i need to wash her and take some more pics. Prob tomorrow since its my day off
back in winter
spring
i need to wash her and take some more pics. Prob tomorrow since its my day off
#53
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Random_Monkey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Random_Monkey »</TD></TR><TR><TD CLASS="quote">yeh, heres a couple pics since u asked. I didnt wanna thread jack </TD></TR></TABLE>
Ya that looks sick man, I REALLY want to shave my emblems and side moldings but body shops want waaaay too much. Nice job with your emblems though
So I will FINALLY have an update very very soon, nothin major but I think it looks sweet
And here are a few of my favorite pics
Ya that looks sick man, I REALLY want to shave my emblems and side moldings but body shops want waaaay too much. Nice job with your emblems though
So I will FINALLY have an update very very soon, nothin major but I think it looks sweet
And here are a few of my favorite pics
Last edited by skipunk4; 06-18-2010 at 11:21 AM.
#55
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Random_Monkey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Random_Monkey »</TD></TR><TR><TD CLASS="quote">dam bro, bring it to jersey and ill do all the body work for real cheap! and i kick myself for not shaving the side moldings and license plate holes
</TD></TR></TABLE>
Ha ha ya I wish dude. But just get it back in there and shave that **** off lol! Your car looks good how it is the only thing I'm not feelin is the spoiler. Would look super hot w/o it but to each his own
So here is that update. I got a great idea from SHG_Riley, so I figured I would try it out and see how it turned out
Polished up the stock muffler
Before: That thing was dirty as HELL!
During: ha ha nice setup right?
After: nice n' fresh
On the car
Stay fresh!
Modified by skipunk4 at 1:14 AM 5/23/2008
</TD></TR></TABLE>
Ha ha ya I wish dude. But just get it back in there and shave that **** off lol! Your car looks good how it is the only thing I'm not feelin is the spoiler. Would look super hot w/o it but to each his own
So here is that update. I got a great idea from SHG_Riley, so I figured I would try it out and see how it turned out
Polished up the stock muffler
Before: That thing was dirty as HELL!
During: ha ha nice setup right?
After: nice n' fresh
On the car
Stay fresh!
Modified by skipunk4 at 1:14 AM 5/23/2008
#58
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Na-Spirit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by A's 94 GSR »</TD></TR><TR><TD CLASS="quote">dang this polished stock muffler thing is catching everybody.
anyways looks good. How long did it take you? </TD></TR></TABLE>
I had only seen a couple and I thought it looked sweet so I figured I'd try it out and I like it a lot! But mine was dirty as hell so it took me a good 4 hours. Steel wool was my best friend
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Na-Spirit »</TD></TR><TR><TD CLASS="quote">proper enthusiast , nice work!</TD></TR></TABLE>
Thanks
anyways looks good. How long did it take you? </TD></TR></TABLE>
I had only seen a couple and I thought it looked sweet so I figured I'd try it out and I like it a lot! But mine was dirty as hell so it took me a good 4 hours. Steel wool was my best friend
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Na-Spirit »</TD></TR><TR><TD CLASS="quote">proper enthusiast , nice work!</TD></TR></TABLE>
Thanks
#59
Honda-Tech Member
Join Date: Apr 2007
Location: Dirty Jerz!
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skipunk4)
OEM Type R wing is the shiznit! though i do like spoilerless cars too
nice polish job i was thinking bout doing that but dont have the time....plus when my WS2 comes in itll be polished enough
nice polish job i was thinking bout doing that but dont have the time....plus when my WS2 comes in itll be polished enough
#65
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (9k4play)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Random_Monkey »</TD></TR><TR><TD CLASS="quote">OEM Type R wing is the shiznit! though i do like spoilerless cars too
nice polish job i was thinking bout doing that but dont have the time....plus when my WS2 comes in itll be polished enough</TD></TR></TABLE>
Ya I had a type r wing for like 3 days lol then I decided it wasn't for me. But for sure that ws2 will be nice and shiny
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 140sx »</TD></TR><TR><TD CLASS="quote">In oly? havenent seen you around. keep up the good work </TD></TR></TABLE>
Yup born and raised lol, but thanks I am tryin!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gabebauman »</TD></TR><TR><TD CLASS="quote"> Nice. Can I have your RPF1's? </TD></TR></TABLE>
lol your car looks sick with those polished slips, regamasters?(I'm guessing?) but I'll think about it I'll take that b20 off your hands
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mnskateboarder »</TD></TR><TR><TD CLASS="quote">pretty clean </TD></TR></TABLE>
Thanks
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ron M »</TD></TR><TR><TD CLASS="quote">Nice! You should get a newer gsr exhaust tip </TD></TR></TABLE>
Dude I know I want one, but I can't find any used and from Honda there [FREAK]in 50 bucks!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9k4play »</TD></TR><TR><TD CLASS="quote">Nice Car, Very Clean </TD></TR></TABLE>
I'm tryin, thanks mang!
So I am hoping to have an update here pretty quick, but right now I am tryin to save money and go to work and school at the same time so it sucks!!!
But for now here are a few old ones
Take it eazy
nice polish job i was thinking bout doing that but dont have the time....plus when my WS2 comes in itll be polished enough</TD></TR></TABLE>
Ya I had a type r wing for like 3 days lol then I decided it wasn't for me. But for sure that ws2 will be nice and shiny
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 140sx »</TD></TR><TR><TD CLASS="quote">In oly? havenent seen you around. keep up the good work </TD></TR></TABLE>
Yup born and raised lol, but thanks I am tryin!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gabebauman »</TD></TR><TR><TD CLASS="quote"> Nice. Can I have your RPF1's? </TD></TR></TABLE>
lol your car looks sick with those polished slips, regamasters?(I'm guessing?) but I'll think about it I'll take that b20 off your hands
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mnskateboarder »</TD></TR><TR><TD CLASS="quote">pretty clean </TD></TR></TABLE>
Thanks
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ron M »</TD></TR><TR><TD CLASS="quote">Nice! You should get a newer gsr exhaust tip </TD></TR></TABLE>
Dude I know I want one, but I can't find any used and from Honda there [FREAK]in 50 bucks!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9k4play »</TD></TR><TR><TD CLASS="quote">Nice Car, Very Clean </TD></TR></TABLE>
I'm tryin, thanks mang!
So I am hoping to have an update here pretty quick, but right now I am tryin to save money and go to work and school at the same time so it sucks!!!
But for now here are a few old ones
Take it eazy
#72
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CRXone)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9KRevLimitDC2 »</TD></TR><TR><TD CLASS="quote">Seriously lets get goin here.. i thought i was slow </TD></TR></TABLE>
lol I'm gettin on it I promise! It's hard workin full time
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXone »</TD></TR><TR><TD CLASS="quote">Exactally how i want to build an integra </TD></TR></TABLE>
Thanks man there is A LOT more to be done.
UPDATES FINALLY
So I started tearin down the car so I can do my "wire tuck" lol
I got all the body panels off piece a cake, then it was to getting off all the oem wire clips and sleeving.
Here is what I got so far. . .
Removed:
-Cruise control
-Window sprayer
-OEM Air box
-A LOT of electrical tape
Just a cool pic
Also picked up some sleeving, heat shrink and a heat gun to do my drivers side light harness and a brand new OEM gsr strut bar with some fresh hardware nice and fresh.
Just a quick test fit. . .
Stay tuned, more to come
lol I'm gettin on it I promise! It's hard workin full time
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXone »</TD></TR><TR><TD CLASS="quote">Exactally how i want to build an integra </TD></TR></TABLE>
Thanks man there is A LOT more to be done.
UPDATES FINALLY
So I started tearin down the car so I can do my "wire tuck" lol
I got all the body panels off piece a cake, then it was to getting off all the oem wire clips and sleeving.
Here is what I got so far. . .
Removed:
-Cruise control
-Window sprayer
-OEM Air box
-A LOT of electrical tape
Just a cool pic
Also picked up some sleeving, heat shrink and a heat gun to do my drivers side light harness and a brand new OEM gsr strut bar with some fresh hardware nice and fresh.
Just a quick test fit. . .
Stay tuned, more to come
#73
Honda-Tech Member
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
welp..now your doing something that seperates yours from mine, to hell if i could manage a "proper" tuck ha...eh maybe when i get a second car ill give it a go.
awesome enthusiast work as usual! im assuming me and you will be building our motors around the same time.... that should be quite the experience..basically means my car will never run again :/
awesome enthusiast work as usual! im assuming me and you will be building our motors around the same time.... that should be quite the experience..basically means my car will never run again :/
#74
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Na-Spirit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Na-Spirit »</TD></TR><TR><TD CLASS="quote">welp..now your doing something that seperates yours from mine, to hell if i could manage a "proper" tuck ha...eh maybe when i get a second car ill give it a go.
awesome enthusiast work as usual! im assuming me and you will be building our motors around the same time.... that should be quite the experience..basically means my car will never run again :/ </TD></TR></TABLE>
Ha ha ya dude it is taking me some time... I work full time so it sucks cuz when I get home I dont want to work. But its comin along... slowly lol. But ya I think im just gonna go ls vtec but im so undecided its ridiculous!
Made a little progress on the car...
Driver side harness out... now to untaping, depinning and sleeving
I &hearts my Honda
Modified by skipunk4 at 2:58 AM 7/1/2008
awesome enthusiast work as usual! im assuming me and you will be building our motors around the same time.... that should be quite the experience..basically means my car will never run again :/ </TD></TR></TABLE>
Ha ha ya dude it is taking me some time... I work full time so it sucks cuz when I get home I dont want to work. But its comin along... slowly lol. But ya I think im just gonna go ls vtec but im so undecided its ridiculous!
Made a little progress on the car...
Driver side harness out... now to untaping, depinning and sleeving
I &hearts my Honda
Modified by skipunk4 at 2:58 AM 7/1/2008