Post Your Race Header (Whatever It Is)
#27
Re: (fmrprojects)
My D-series SMSP Jet Hot ceramic coated.... yes I know SMSP isn't cut into the flange.... went through this argument before on my local boards just to have Dave sign on and prove them wrong.
Best header ever!!! The only other header I would have consider is a Bisi...
Best header ever!!! The only other header I would have consider is a Bisi...
#30
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: New York
Posts: 17,994
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xDEFTONESx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xDEFTONESx »</TD></TR><TR><TD CLASS="quote">
just go getcha a ITR header with a 2.5'' collector. thats plenty of header for a mild ITR motor and itll "fit" just fine. oh ****, and its legal. </TD></TR></TABLE>
I had that heard on the last car this motor was in, but after seeing dyno tests with some race headers and the JDM 4-1 and seeing them make much more power on stock ITR motors I figured it was time to switch it up.
just go getcha a ITR header with a 2.5'' collector. thats plenty of header for a mild ITR motor and itll "fit" just fine. oh ****, and its legal. </TD></TR></TABLE>
I had that heard on the last car this motor was in, but after seeing dyno tests with some race headers and the JDM 4-1 and seeing them make much more power on stock ITR motors I figured it was time to switch it up.
#33
Honda-Tech Member
iTrader: (2)
Join Date: Feb 2003
Location: Stockton, CA
Posts: 4,774
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your race header (_adirondackR_)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _adirondackR_ »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
thats off the hook right there!!!
thats off the hook right there!!!
#39
#41
Imperious: Mod of Valor
Join Date: Oct 2003
Location: Seattle, WA
Posts: 12,393
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ATS*Mark)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*Mark »</TD></TR><TR><TD CLASS="quote">im loving this thread</TD></TR></TABLE>
I concur.
That is ******* sick.
I concur.
That is ******* sick.
#44
Honda-Tech Member
Re: (crstfr14)
Here is my old Apex 4-2-1, trying to squeeze as much low end torque out of my torqueless B16 as possible. Paid $100 bucks for it, the original owner got coolant all over it and ruined the finish, but I polished it up and made it looks as good as new.
#46
Honda-Tech Member
Join Date: Sep 2004
Location: North Carolina
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Felix.)
I demand more! haha
Im trying to decide a nice header to go with for my new set up. Its going to be a semi-built b20vtec in my crx.
Im just worried about clearance issues with them. Anyone have any suggestions, or know about fitment in an "ef" chassis?
Im trying to decide a nice header to go with for my new set up. Its going to be a semi-built b20vtec in my crx.
Im just worried about clearance issues with them. Anyone have any suggestions, or know about fitment in an "ef" chassis?