NirVTEC

Tired of sorting through countless and useless posts.....
After you vote:
What was done?
Turnaround time?
Overall satisfaction with customer service?


Modified by ::-::NirVTEC::-:: at 9:50 PM 5/14/2007

Fkned

DAVE'S WORK RULES
brad's very good also





Modified by Fkned at 12:00 PM 6/19/2007

1 2 NV

brad has had 2 of my heads, both ported previously. his work has been excellent and the turnaround time has been good with RLZ.
my other headwork was done by HRD who used to or still might do skunk2s heads which was excellent as well. however brad improved upon their work.
the other headwork i had done was with jeff at IB and the port work was good however the VJ was not and the head didnt flow for ****. barely better than stock. turnaround time was excellent 3 weeks.
HRD and RLZ both had my heads in the off season so neither had a serious rush to get done.

91' LS-VTEC

Well I'm getting head worked over by Brad @ RLZ. I'm shure it will flow great, because thats all he puts out are great heads. The turn aounrd time, that was a diffrent story.

I'm getting ready to send in a head to Combustion Contraption. So I had to put him on the list.

Combustion Contraption

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91’ LS-VTEC &raquo;</TD></TR><TR><TD CLASS="quote">
I'm getting ready to send in a head to Combustion Contraption. So I had to put him on the list. </TD></TR></TABLE>

Thanks man.

There are a handful of guys on this forum running my cylinder heads, hopefully they can chime in with their experience.

1 2 NV

good point, although steve (combustion contraption) is not as well known i have "heard" of some stuff hes done. i personally wouldnt mind sending him a head as well.

Combustion Contraption

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ::-::NirVTEC::-:: &raquo;</TD></TR><TR><TD CLASS="quote">Where are you at??? </TD></TR></TABLE>

Im in So Cal with all the other brats youve been talking about.

Dont let this thread get off track though, if you want to discuss something, go ahead and PM me.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1 2 NV &raquo;</TD></TR><TR><TD CLASS="quote">good point, although steve (combustion contraption) is not as well known i have "heard" of some stuff hes done. i personally wouldnt mind sending him a head as well. </TD></TR></TABLE>

Thanks for the kind words. Though i have done hundreds of heads, most of them were for a shop i worked for. I just recently started doing Honda heads on my own. Im a baby in this scene compared to Tom and Brad, but im no spring chicken with a grinder.

NirVTEC

What needs to be "KNOWN" before headwork can begin?
Displacement?
Compression?
Cams?
Intake Manifold/TB?
Header?

1 2 NV

you hit the nail on the head, cams, compression, RPM range, displacement. the rest is up to the porter.

Aquafina

iTrader: (3)

Some match the cams to the head.

91' LS-VTEC

Modified by 91' LS-VTEC at 8:28 PM 5/14/2007

Aquafina

iTrader: (3)

It'd probably be better if we didn't get into all that (unless you're just telling about the transaction). Unless you're designing an engine from scratch, theres too much involved for a headwork poll.

PowerSpeed Motorsports

Got a few heads done for our race car and some of my homies cars by Mr. Gude. They all came out great and made great power. For the price you can't beat his packages.

91' LS-VTEC

true, editing my last post.

pingaturbo

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PowerSpeed Motorsports &raquo;</TD></TR><TR><TD CLASS="quote">Got a few heads done for our race car and some of my homies cars by Mr. Gude. They all came out great and made great power. For the price you can't beat his packages. </TD></TR></TABLE>

I'm running his cams on my turbo car too.

ShaunRR

Brad has a lot of satisfied customers on here and in the racing world. His list of credentials is ridiculous. My vote for the best bargain priced headwork would have to go to DonF. I know both George Knighton(the moderator on here) and Mike Corvey(VtecKiDD) have heads from Don. Feel free to ask them to comment on it.

WhoisDan

Portflow

onepoint6i

Tom at PORTFLOW all the way, he did an awesome job on my head about 5 yrs ago.. turn around time was exactly one week from when i dropped it off..

a couple yrs ago i took it in for a fresh valve job and rev valves...took a week for that too..

daygo_beanR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by onepoint6i &raquo;</TD></TR><TR><TD CLASS="quote">Tom at PORTFLOW all the way, he did an awesome job on my head about 5 yrs ago.. turn around time was exactly one week from when i dropped it off..


</TD></TR></TABLE>

+1 i can say the same thing.. i have two heads that have been worked on by portflow real good guy to talk to as well...

B16b-EJ8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by daygo_beanR &raquo;</TD></TR><TR><TD CLASS="quote">

+1 i can say the same thing.. i have two heads that have been worked on by portflow real good guy to talk to as well...</TD></TR></TABLE>

Turn around time 1 week...nice guy gave me a deal for paying cash...car goes to the dyno on thursday cant wait.

Pippen_001

Head Games is doing mine

Big Teggie

I have had two heads done by Brad at RLZ. A B-Series and K-Series head.

I first started talking to Brad before he became super popular here on HT. Turnaround has always been good on all the parts I have gotten from him, heads, pistons, cams, and other parts.

Its funny how everyone still wants an RLZ head, but I cant sell mine for ****.

NirVTEC

Damn, not a single vote for ALANIZ....thats a surprise to me. I know they have done some Honda Challenge heads. Although I know there are some strict limits to how much can be done, I don't think that would make a difference...

9200RPM

I'm dropping off my head at RLZ tomorrow...I'm using them because they are 20 miles away..

SP GARAGE

iTrader: (1)

my head is going to combustion contraption.