LS VTEC CAM OPINION: BUDDY CLUB OR BRIAN CROWER CAMS
05-08-2008, 06:33 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: ny, ny, usa
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
LS VTEC CAM OPINION: BUDDY CLUB OR BRIAN CROWER CAMS
Just need to know if anyone has any experience with these cams:
Buddy club spec 4 or Brian crower stage 3
I have a Ls Vtec with:
b16 head with 3 angle valve job.
skunk 2 intake manifold
jdm type r headers
b18a bottom end with jdm b16 p30 pistons.
The car is going to be daily driven.
Buddy club spec 4 or Brian crower stage 3
I have a Ls Vtec with:
b16 head with 3 angle valve job.
skunk 2 intake manifold
jdm type r headers
b18a bottom end with jdm b16 p30 pistons.
The car is going to be daily driven.
05-10-2008, 04:43 PM
#3
Re: (Rollo Lawson)
Why are you limiting yourself to those two options only? My roomate had the B. Crower stage 2's and neither one of us were very impressed with his numbers. If he wants to chime in he can, thats all I'll say about his particular situation. He's since switched to S2S2's.
05-10-2008, 05:07 PM
#4
Pirate General...YARRRR
Join Date: Jun 2004
Location: Kills, United States
Posts: 12,355
Likes: 0
Received 2 Likes
on
2 Posts
Re: (clean rice)
If it has to be one of those 2, I'd go with the BCs, but I'm sure if you don't mind getting something else you can end up with a better cam.
05-10-2008, 05:59 PM
#5
Honda-Tech Member
Join Date: Feb 2004
Location: T Dot
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: (clean rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean rice »</TD></TR><TR><TD CLASS="quote"> My roomate had the B. Crower stage 2's and neither one of us were very impressed with his numbers</TD></TR></TABLE>
every set up responds differently. i have 0012's in my lsv at they make good power. its funny that ur roomy changed to s2s2's, bcuz there specs are very close in terms of lift and duration when compared to the 0012's
every set up responds differently. i have 0012's in my lsv at they make good power. its funny that ur roomy changed to s2s2's, bcuz there specs are very close in terms of lift and duration when compared to the 0012's
05-10-2008, 06:07 PM
#7
Honda-Tech Member
Join Date: Feb 2004
Location: T Dot
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS VTEC CAM OPINION: BUDDY CLUB OR BRIAN CROWER CAMS (mar778c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mar778c »</TD></TR><TR><TD CLASS="quote">Pro Series 
</TD></TR></TABLE>
oh, no. here we go again.......
edit: DRobs dad made made good power with bc 0013's
Modified by Rollo Lawson at 10:12 PM 5/10/2008
</TD></TR></TABLE>oh, no. here we go again.......
edit: DRobs dad made made good power with bc 0013's
Modified by Rollo Lawson at 10:12 PM 5/10/2008
Trending Topics
05-10-2008, 06:12 PM
#8
Re: LS VTEC CAM OPINION: BUDDY CLUB OR BRIAN CROWER CAMS (Rollo Lawson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rollo Lawson »</TD></TR><TR><TD CLASS="quote">
oh, no. here we go again.......</TD></TR></TABLE>
What do you mean? Those cams work. Pro1 or 2 will work pretty well. The 2s will be a bit high strung.
oh, no. here we go again.......</TD></TR></TABLE>
What do you mean? Those cams work. Pro1 or 2 will work pretty well. The 2s will be a bit high strung.
05-10-2008, 06:49 PM
#9
Member
Join Date: Apr 2006
Location: CA
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
05-10-2008, 08:10 PM
#10
Re: (Rollo Lawson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rollo Lawson »</TD></TR><TR><TD CLASS="quote">
every set up responds differently. i have 0012's in my lsv at they make good power. its funny that ur roomy changed to s2s2's, bcuz there specs are very close in terms of lift and duration when compared to the 0012's</TD></TR></TABLE>
"Spec" wise maybe, but there are more to camshafts than just duration/lift "#'s."
every set up responds differently. i have 0012's in my lsv at they make good power. its funny that ur roomy changed to s2s2's, bcuz there specs are very close in terms of lift and duration when compared to the 0012's</TD></TR></TABLE>
"Spec" wise maybe, but there are more to camshafts than just duration/lift "#'s."
05-10-2008, 08:41 PM
#11
Honda-Tech Member
Join Date: Feb 2004
Location: T Dot
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: (clean rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean rice »</TD></TR><TR><TD CLASS="quote">
"Spec" wise maybe, but there are more to camshafts than just duration/lift "#'s."</TD></TR></TABLE>
very true, but i have all of the specs documented from both cams (0012 and s2s2). btdc, abdc, lobe center, lift and duration for both the intake and exhaust. most stg.2 cams are similar, just like these 2 are. i dyno next week so we'll see if the 0012's work. but from the street tune, the motor makes good power with untouched timing maps. strictly a/f
"Spec" wise maybe, but there are more to camshafts than just duration/lift "#'s."</TD></TR></TABLE>
very true, but i have all of the specs documented from both cams (0012 and s2s2). btdc, abdc, lobe center, lift and duration for both the intake and exhaust. most stg.2 cams are similar, just like these 2 are. i dyno next week so we'll see if the 0012's work. but from the street tune, the motor makes good power with untouched timing maps. strictly a/f
05-10-2008, 10:10 PM
#13
Honda-Tech Member
Join Date: Jul 2004
Location: 909, ca, usa
Posts: 1,943
Likes: 0
Received 0 Likes
on
0 Posts
Re: (clean rice)
you can also try s2s2.. very easy to get ahold of, easy on the valvetrain, and most tuners know what to do with them. crower II's are smaller than these
05-11-2008, 11:20 AM
#14
Honda-Tech Member
Join Date: Oct 2006
Location: San Diego, Ca
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS VTEC CAM OPINION: BUDDY CLUB OR BRIAN CROWER CAMS (mar778c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mar778c »</TD></TR><TR><TD CLASS="quote">Pro Series </TD></TR></TABLE>
x2
</TD></TR></TABLE>x2
05-15-2008, 10:21 AM
#17
Join Date: May 2008
Location: SAN DIEGO, CA, US
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Rollo Lawson)
I HEAR BRIAN CROWERS PARTS ARE ALL MADE FROM CHINA AND HAS NO SHOP OR BUILDING AND EVERYTHING IS OUT OF HIS HOUSE.ONLY ACTUAL CROWER MAKES PARTS IN HOUSE.
05-15-2008, 07:25 PM
#18
Honda-Tech Member
Join Date: Feb 2004
Location: T Dot
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: (OUTKASTEG619)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OUTKASTEG619 »</TD></TR><TR><TD CLASS="quote">I HEAR BRIAN CROWERS PARTS ARE ALL MADE FROM CHINA AND HAS NO SHOP OR BUILDING AND EVERYTHING IS OUT OF HIS HOUSE.ONLY ACTUAL CROWER MAKES PARTS IN HOUSE.</TD></TR></TABLE>
05-15-2008, 07:30 PM
#19
Re: (OUTKASTEG619)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OUTKASTEG619 »</TD></TR><TR><TD CLASS="quote">I HEAR BRIAN CROWERS PARTS ARE ALL MADE FROM CHINA AND HAS NO SHOP OR BUILDING AND EVERYTHING IS OUT OF HIS HOUSE.ONLY ACTUAL CROWER MAKES PARTS IN HOUSE.</TD></TR></TABLE>
Wow, that was a useful post.
Wow, that was a useful post.
06-09-2008, 06:13 PM
#20
Junior Member
Join Date: Jan 2008
Location: usa
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mmk21)
i had the guts and i got absolutly no glory with the crower stage 2's for my lsv i hit vtec and the exhaust snapped in 4 now my engine runs like **** im not blaming the cams i read after that the lsm assembally ran out of spring and caused the cams to snap i don't know what i want to do anymore 
06-09-2008, 10:03 PM
#22
Honda-Tech Member
Join Date: Feb 2004
Location: T Dot
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: (allmotaking)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allmotaking »</TD></TR><TR><TD CLASS="quote">pro series>bc4's>BC</TD></TR></TABLE>
lol
lol
06-10-2008, 12:53 AM
#23
Honda-Tech Member
Join Date: Jan 2004
Location: Sydney, NSW, Australia
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
I think most people over cam there engines trying to chase those magic dyno numbers,After a long chat with Clean Rice today there seems to be lots of misinformation regarding cams and setups.There are some very good cams around that make good solid mid range power but most guys still look at peak numbers and whatever is the flavour of the month cam.I am sponsored by Buddyclub here in Australia and I sell and use Buddyclub/Rocket/Skunk2/Toda cams and any other that makes the customers setup just a little better for his/her needs.Sorry for the rant but just my 2cents worth.
Regards Dyno Dave
Regards Dyno Dave
06-10-2008, 06:59 PM
#25
Honda-Tech Member
Join Date: Feb 2004
Location: T Dot
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Re: (allmotaking)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allmotaking »</TD></TR><TR><TD CLASS="quote">Different cams for different set-ups...had no personal experience with BC's but heard of their great quality and performance. dont get me wrong..</TD></TR></TABLE>
once again, opinion not fact. one has had no 1st hand experience with probably any of the products mentioned (s2, bc, b.crow) yet knows which cam is superior and inferior. simply amazing
once again, opinion not fact. one has had no 1st hand experience with probably any of the products mentioned (s2, bc, b.crow) yet knows which cam is superior and inferior. simply amazing