K24 Nippon Racing Pistons. Do the wrist pins fit stock rods? Ans: Yes
#1
Honda-Tech Member
Thread Starter
K24 Nippon Racing Pistons. Do the wrist pins fit stock rods? Ans: Yes
http://www.ebay.com/itm/Nippon-Racing-K24-Full-Floating-Pistons-PNC-87mm-Standard-HST-RSX-SI-HOT-TSX-/181515513171?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a432aed53&vxp=mtr
Anyone have any experience with these? Want to know if the wrist pins fit stock oem rods, as in not TSX k24A2 rods. I am talking about Accord, CRV, etc rods. I do not have a measurement for the Nippon Racing pin size or know of anyone that has ran them.
Anyone have any experience with these? Want to know if the wrist pins fit stock oem rods, as in not TSX k24A2 rods. I am talking about Accord, CRV, etc rods. I do not have a measurement for the Nippon Racing pin size or know of anyone that has ran them.
#2
I'm not Rick!
Join Date: Feb 2009
Location: under a prayer shawl
Posts: 6,940
Likes: 0
Received 4 Likes
on
4 Posts
re: K24 Nippon Racing Pistons. Do the wrist pins fit stock rods? Ans: Yes
might be way late, but for the sake of searching. yes they fit.
tsx/accord/crv/element have the same exact rod dimensions. TSX was stronger however.
the question is k24 with RBC head. do I use PNC pistons or RL5 pistons? which yields more CR
tsx/accord/crv/element have the same exact rod dimensions. TSX was stronger however.
the question is k24 with RBC head. do I use PNC pistons or RL5 pistons? which yields more CR
Thread
Thread Starter
Forum
Replies
Last Post
honda272
All Motor / Naturally Aspirated
1
05-07-2011 08:00 AM
LSVTECoupe
Tech / Misc
3
12-26-2003 04:05 PM