Formula1

High, I'm looking to buy a 5 main block girdle but try as I might, I can't find anywhere to buy one. Can I get it directly from ERL? I've seen several people selling blocks with them in the blocks, I've also seen many other people considering buying them, but no one ever says where they're getting them from. Thanks for the help

pomansouth01

you can buy z10's directly from z10...dont know if you want theirs or not...

Formula1

well I'm looking to rev past 11k so I was hoping to get as much stability as possible. So while I'm not making the hp to merit the 5 main girdle, I think the revs might. Not sure though because no one talks about girdles in that sense.

Darton

Closest shop to you that would have them is:

Full-Race Motorsports
Contact: Todd Yager
4107 E Winslow Ave. Ste. B
Pheonix, Arizona 85040
United States
602-437-2101
Fax: 602-437-1061
http://www.full-race.com
todd@full-race.com

Formula1

Are they a direct dealer that can get them for me? Because on their site they only have ERL sleeves.

k24em2

Yes they can get them, although I think you have to send your block to ERL for them to install it.

ERL PERFORMANCE, INC.
P.O. Box 1026
2560 Charlestown Road
New Albany, Indiana 47150

Phone: (812) 948 - 8484

Formula1

So I could buy the girdle, get my engine assembled without the girdle, oil pan, etc and send it to erl for the rest of that?

rodimus

have you called ERL yet?

Formula1

No, didn't think it was necessary at this point since I won't be buying one for a while. Though they would definitely have more info on how to/who can install it and where to get it

EDIT: didn't answer

PPMOZ

There is a guy on ebay that sells them complete with studs and is cheaper then most outlets.

Hope this helps and he is a erl dealer.

k24em2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Formula1 &raquo;</TD></TR><TR><TD CLASS="quote">So I could buy the girdle, get my engine assembled without the girdle, oil pan, etc and send it to erl for the rest of that?</TD></TR></TABLE>

I think ERL line bores the mains after they install it, so you would need to get that done first.

Formula1

I talked to Sean at ERL and he said I could send the mains to them to get them prepped and then they would send the shop I'm having assemble everything instructions on how to install the girdle so. The prepping of the mains is free he said.

Thanks for the help guys.

CivicVX94

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Formula1 &raquo;</TD></TR><TR><TD CLASS="quote">I talked to Sean at ERL and he said I could send the mains to them to get them prepped and then they would send the shop I'm having assemble everything instructions on how to install the girdle so. The prepping of the mains is free he said.

Thanks for the help guys.</TD></TR></TABLE>
sweet..How much for the girdle itself?