can we get a official b16 all motor dyno thread
yea i was wondering what you guys are making with yall b16
im running a 2.5in custom cold air hytec small tube header with a test pipe custom 2.5in exhaust piping i got the stock im port and polished dynoed at 145whp and 104wt |
Re: can we get a official b16 all motor dyno thread
My old B16 dyno'd 147hp and 107tq
AEM 2.5" intake, 2layer headgasket, lightweight crank pulley, lightweight flywheel, 2.25" exhaust. The rest was stock. |
Re: can we get a official b16 all motor dyno thread
well i was thinking should i get a itr throttle body and did the headgasket really do any improvements
|
Re: can we get a official b16 all motor dyno thread
I'll stick with my D thanks..
|
Re: can we get a official b16 all motor dyno thread
so only two people on here have b16 then
|
Re: can we get a official b16 all motor dyno thread
1 Attachment(s)
2 years ago i had a sir2 b16 with s2s2's, dc 4-1 jdm header (ran open), jg 65mm tb, aem cai, and ran it on an s200 with type r base map. It put down 177whp and 119wtq uncorrected.
Attachment 474821 |
Re: can we get a official b16 all motor dyno thread
great thread!!! doesnt look like 2 many ppl have a b16 these days, ne one else? =[
|
Re: can we get a official b16 all motor dyno thread
This is such a general question, but here we go.
In 2001 I had a b16a2, S2S3's gears and valve train, Cai, Fpr, Comptech Header, S2 IM, S2 Ecu. Dyno'd at 159hp 119ft lbs. I believe there is a thread with all motor b16's. |
Re: can we get a official b16 all motor dyno thread
|
Re: can we get a official b16 all motor dyno thread
b16 allmotor setups r for women and children
|
Re: can we get a official b16 all motor dyno thread
friends b16a2 that i built had ctr cams, pistons, hytech rep headers, short ram intake, 310 cc injectors, skunk works intake manifold put down 170 whp on the dynojet
|
Re: can we get a official b16 all motor dyno thread
keep them coming
|
Re: can we get a official b16 all motor dyno thread
Originally Posted by quicksilver1689
(Post 36913756)
b16 allmotor setups r for women and children
|
Re: can we get a official b16 all motor dyno thread
ITR head w/ headgames valvejob
bc3's, rm valvetrain & valves 60mm tb, p30 manifold 3' intake w/ pr velocity stack and k&n filter 1st gen b16 block w/ os pct's edelbrock header, shortened, w/ 2.5 collector mod smsp 200 cell cat, 2.5 exhaust tuned w/ BRE https://img90.imageshack.us/img90/82...dynomodue8.gif 167whp/116wtq |
Re: can we get a official b16 all motor dyno thread
There are alot more in the dyno thread uptop.
|
Re: can we get a official b16 all motor dyno thread
Originally Posted by quicksilver1689
(Post 36913756)
b16 allmotor setups r for women and children
|
Re: can we get a official b16 all motor dyno thread
Originally Posted by SOHCinWA
(Post 36916129)
x3. But I guess its cool to say that you have a swap??
When I did my first b16 swap there wasn't much info out there for d series builds and at that time b16a changeovers were only $900. So naturally that was the cheapest, easiest way to gain 50hp and a great trans. That original b16 lasted me 8 years without even a hiccup. I sold that to a friend 2 yrs ago who still runs it today and he is HARD on everything he drives. Still no problems whatsoever. All this while still getting 30mpg consistently. It may not be a power house but after all this time I have much respect for the little b16. I don't care that your D series was cheaper or that you beat them @ the drag strip. There are lots of them available and are very affordable so naturally people will build them. You don't need to criticize everyone who does. /Rant. |
Re: can we get a official b16 all motor dyno thread
Originally Posted by SOHCinWA
(Post 36909872)
I'll stick with my D thanks..
Originally Posted by SOHCinWA
(Post 36909872)
x3. But I guess its cool to say that you have a swap??
|
Re: can we get a official b16 all motor dyno thread
I made 178hp@10,000rpm with a standard bore b16.10.5compression, s2 pro 1, edelbrock manifold,s2 68mm tb,rage header
|
Re: can we get a official b16 all motor dyno thread
thx everyone and i have an em1 that i can work with if i could i would go k series but with the way the economy is going its either k series and have no roof......
but thx everyone and also i can have enough fun with my b16 anyway so is there anyone else would like to share |
Re: can we get a official b16 all motor dyno thread
Originally Posted by racebucket_eg
(Post 36916507)
Please quit cluttering this thread with senseless bullshit. No one in this thread is criticizing you for building a single cam.
|
Re: can we get a official b16 all motor dyno thread
B16a2 Head
B16a SIR1 Block Stock IM & TB PCT Pistons STD (CTR) Skunk2 Tuner Stage 2 Cheap 2.25 Header Custom 2.5 Exhaust Crome Pro 169 whp 115 wtq |
Re: can we get a official b16 all motor dyno thread
blinx9900, you might want to direct that comment towards bisimoto and see what he thinks about that, lol
|
Re: can we get a official b16 all motor dyno thread
Originally Posted by patriot
(Post 36918485)
blinx9900, you might want to direct that comment towards bisimoto and see what he thinks about that, lol
|
Re: can we get a official b16 all motor dyno thread
Originally Posted by blinx9900
(Post 36919366)
you would poop yourself if you learned how much his crank alone cost ;)
|
All times are GMT -8. The time now is 12:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands