which cams with following spec
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: United Kingdom
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
which cams with following spec
b18c6 typer block
Wiseco 12.2:1 pistons
LS 89mm Crank
eagle rods and arp rods bolts
Fully ported and .040 skimmed pr3 head
rev racing 8 flat face and 8 dished valves
rev racing valve springs and retainers
rev racing bronze valve guides
type r manifold port matched to the head
BLox 68mm throttle body port matched
thats my spec as of now, wanted to know which cams would best for this set up, i have looked at quite few but can't really make a choice but need your opinions guys, Amer
Wiseco 12.2:1 pistons
LS 89mm Crank
eagle rods and arp rods bolts
Fully ported and .040 skimmed pr3 head
rev racing 8 flat face and 8 dished valves
rev racing valve springs and retainers
rev racing bronze valve guides
type r manifold port matched to the head
BLox 68mm throttle body port matched
thats my spec as of now, wanted to know which cams would best for this set up, i have looked at quite few but can't really make a choice but need your opinions guys, Amer
#5
Honda-Tech Member
Join Date: Sep 2002
Location: Little Rock, AR
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
#6
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: United Kingdom
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: which cams with following spec
i have got a 5zigen jasma, but i have been thinking of buying that kid racing rmf relica or hytech ones, with 3" exhaust allround like skunk2 mega power r
#7
Honda-Tech Member
Join Date: Sep 2002
Location: Little Rock, AR
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: which cams with following spec
Kidd's Header is a nice one. You'll hear conflicting ideas on the 3" exhaust, but I happen to think you're going in the right direction.
Thread
Thread Starter
Forum
Replies
Last Post
civicboyvtec
All Motor / Naturally Aspirated
3
03-23-2009 12:26 PM