Buddy Club Spec 4 Cams Released!!!!!
Hey guys,
I know I've been keeping you guys waiting on these and finally I can release them. I have included the specs of the cams below and I will post the dyno sheet in a little bit. If you have any questions please contact me at the office after 3:00pm. Take care guys and enjoy!!! Spec IV Cam lift: IN 12.3mm EX 11.8mm Duration: IN 306 EX 302 IN 37 BTDC (1mm OPEN) 52 ABDC (1mm OPEN) EX 62 BBDC (1mm OPEN) 32 ATDC (1mm OPEN) V/C IN .007 EX .008 https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif |
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
what motor were they dyno'd on? and what were the specs of that motor?
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
I will be giving you guys the information at about 3:00pm or after. I apologize I am just really busy here at the office. I just wanted to post and let you guys know that we are releasing.
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BuddyClubUSA9 »</TD></TR><TR><TD CLASS="quote">
Spec IV Cam lift: IN 12.3mm EX 11.8mm Duration: IN 306 EX 302 IN 37 BTDC (1mm OPEN) 52 ABDC (1mm OPEN) EX 62 BBDC (1mm OPEN) 32 ATDC (1mm OPEN) V/C IN .007 EX .008 https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE> Looks good! 2 questions! 1. Whats the price? 2. What Valvesprings are recommended for use with these cams? |
Re: Buddy Club Spec 4 Cams Released!!!!! (hybrid_vtec)
1. PM me where you live and I'll refer you to a dealer closest to you.
2. Any good quality aftermarket dual valve springs should do. Of course I recommend our titanium dual springs but it's up to you. |
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
Hmm, you guys have titanium dual valvesprings, or do you mean Ti retainers. I thought spirng steel was a must for valve springs.
|
Re: Buddy Club Spec 4 Cams Released!!!!! (rjay8604)
I apologize for that. That was my mistake. I carry titanium retainers and not titanium springs. Thank you for pointing that out.
|
Re: Buddy Club Spec 4 Cams Released!!!!! (hybrid_vtec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid_vtec »</TD></TR><TR><TD CLASS="quote">
Looks good! 2 questions! 1. Whats the price? 2. What Valvesprings are recommended for use with these cams? </TD></TR></TABLE> PM me for pricing, we have them ready to ship! http://www.robearracing.com https://honda-tech.com/forums/images/smilies/emthup.gif |
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BERT-O)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BERT-O »</TD></TR><TR><TD CLASS="quote">
its about damn time https://honda-tech.com/forums/images/smilies/emwink.gif </TD></TR></TABLE> yup it is! https://honda-tech.com/forums/images/smilies/emthup.gif check my sig for pricing https://honda-tech.com/forums/images...es/emsmile.gif |
Re: Buddy Club Spec 4 Cams Released!!!!! (Espec_rep)
Subscribing to this thread.
Thanks BC. |
Re: Buddy Club Spec 4 Cams Released!!!!! (Espec_rep)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Espec_rep »</TD></TR><TR><TD CLASS="quote">
yup it is! https://honda-tech.com/forums/images/smilies/emthup.gif check my sig for pricing https://honda-tech.com/forums/images...es/emsmile.gif </TD></TR></TABLE> check IM |
Re: Buddy Club Spec 4 Cams Released!!!!! (BERT-O)
Can't wait to see the dyno's!!!
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
I'll be sure to give them a test https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
man now i have to try to sell my spec 3s https://honda-tech.com/forums/images/smilies/emsad.gif
|
Re: Buddy Club Spec 4 Cams Released!!!!! (Tbone)
oooohhhh i know what motor they were tested on! https://honda-tech.com/forums/images...es/emsmile.gif
|
Re: Buddy Club Spec 4 Cams Released!!!!! (GOLDBERG)
yummmmmmmmmmmm https://honda-tech.com/forums/images...es/emsmile.gif
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
so how would these compare to JUN 3 cams
|
Re: Buddy Club Spec 4 Cams Released!!!!! (rochesterricer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rochesterricer »</TD></TR><TR><TD CLASS="quote">Can't wait to see the dyno's!!!</TD></TR></TABLE>
I curious to see these too! |
Re: Buddy Club Spec 4 Cams Released!!!!! (hybrid_vtec)
Buddy Club is gonna take over, wheels, seats, cams, valves, they make nice sh*t though, so let the empire grow. https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Buddy Club Spec 4 Cams Released!!!!! (rjay8604)
yes and i do argee... BUDDY CLUB is on the come up https://honda-tech.com/forums/images/smilies/emthup.gif
|
wow buddyclub IV... https://honda-tech.com/forums/images/smilies/emthup.gif
cant wait to see the dyno results https://honda-tech.com/forums/images/smilies/emthup.gif |
are these gonna need like 12.1 compression plus. Or are they gonna be as streetable as the bc3+. The one question i would liked asked though is will the powerband be as good as the bc3+
|
A streetable cam.....sorry I'm laggin on those dynos guys....I promise I'll get them to you. The compression ratios are the same as the Spec 3+.
|
Re: Buddy Club Spec 4 Cams Released!!!!! (BuddyClubUSA9)
I want to know how these will compare to Crane Stage 2 (253-0012), Stage 3 (253-0012) and Skunk2 Stage camshafts.
Crane Camshaft Specs: http://www.importperformancepa....html Also, what are the benefits of the Buddy Club high compression valves? I already realize springs/retainers are a necessity (given the cam profile) but am unsure of how the valves will be of help on any thing but an all out race motor. BTW this will be for a street driven B16A1 with I/H/E, valve springs and retainers being the only mods for. I will do a stroker kit with high compression pistors later. Or I may go turbo. Depends how I like the results I'm getting with all motor. |
All times are GMT -8. The time now is 07:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands