All Motor Integra's DC's
#1
Thread Starter
Join Date: Jan 2004
Location: rebuilding in, wv, United States
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
All Motor Integra's DC's
Well it seems that i am having mixed feelings about my gsr build and the outcome..
please people post your mods and your dyno results and also your 1/4 ET's.. Also list street tires, slicks, gearing, gutted interior..weight etc and i will make a list of honda-tech's fastest DC N/A Integra's...
Honda-Tech's Fastest N/A DC Chassis
1. Skunked N/A H22 12.23 @ 112 H2b GSR Trans
2. b18avtec N/A 84mm LS/VTEC 23x8.5x15 12.4@108 w/ 228 153
3. Allmotor18 N/A B18c1 22x8x13 12.9 @ 105 w/188whp
4. BigTeggie N/A 85x89 225whp 13.01 @ 109 205/50 bfg's
5. H22atch 13.1 @ 109 w/ 221 161
6. 96TurboTeg 14.3 @ ?? w. 185/125
7. dc2kid N/A B18c1 199/137 14.01 @ 100.79
8. TeamDiesel 14.1 @ 99 JDM ITR Swap
9. GSRMorris 14.4 @ 96 I/E B16 Trans B18c1
10. alfaaay 171/129 14.6 @96
Modified by Yambor at 8:20 PM 5/29/2006
Modified by Yambor at 8:24 PM 5/29/2006
please people post your mods and your dyno results and also your 1/4 ET's.. Also list street tires, slicks, gearing, gutted interior..weight etc and i will make a list of honda-tech's fastest DC N/A Integra's...
Honda-Tech's Fastest N/A DC Chassis
1. Skunked N/A H22 12.23 @ 112 H2b GSR Trans
2. b18avtec N/A 84mm LS/VTEC 23x8.5x15 12.4@108 w/ 228 153
3. Allmotor18 N/A B18c1 22x8x13 12.9 @ 105 w/188whp
4. BigTeggie N/A 85x89 225whp 13.01 @ 109 205/50 bfg's
5. H22atch 13.1 @ 109 w/ 221 161
6. 96TurboTeg 14.3 @ ?? w. 185/125
7. dc2kid N/A B18c1 199/137 14.01 @ 100.79
8. TeamDiesel 14.1 @ 99 JDM ITR Swap
9. GSRMorris 14.4 @ 96 I/E B16 Trans B18c1
10. alfaaay 171/129 14.6 @96
Modified by Yambor at 8:20 PM 5/29/2006
Modified by Yambor at 8:24 PM 5/29/2006
#2
Re: All Motor Integra's DC's (JH4DC4-2GSR)
I had a built gsr motor 81.5mm, with type r cams in it at the time 185whp/125tq, ran a 14.3 @ 98 at MIR with full interior on street tires.
Modified by 96turboteg at 12:41 PM 4/4/2006
Modified by 96turboteg at 12:41 PM 4/4/2006
#3
Honda-Tech Member
Join Date: Apr 2005
Location: ca, usa
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
228whp153tq.1.7 60ft 12.4 108 the motor was hurt on that pass.
took seats out,rear panels .and bumper supports.23x8.5x15's
84mm lsvtec 12.5:1
rs street cams
type r manifold and throttle body
took seats out,rear panels .and bumper supports.23x8.5x15's
84mm lsvtec 12.5:1
rs street cams
type r manifold and throttle body
#4
Honda-Tech Member
Join Date: Feb 2002
Location: CA
Posts: 3,970
Likes: 0
Received 0 Likes
on
0 Posts
Re: (b18avtec(A!!M0TOR))
12.9@105 with my old 1.8L setup making 188whp Dynojet (207whp Clayton). It was in a 1995 GSR weighing 2450lbs with driver on 22x8x13 slicks..
https://honda-tech.com/zerothread?id=1263436
https://honda-tech.com/zerothread?id=1263436
#7
Honda-Tech Member
Join Date: Mar 2002
Location: Southern California, U.S.A.
Posts: 9,854
Likes: 0
Received 3 Likes
on
3 Posts
Re: (JH4DC4-2GSR)
Gordon Mack (MackSpeed-616) 94 Integra 11.70@116.
https://honda-tech.com/zero...=1325
https://honda-tech.com/zero...=1325
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2003
Location: the backwoods, usa
Posts: 2,841
Likes: 0
Received 0 Likes
on
0 Posts
Re: (b19coupe)
jeff aka lip went 12.54 @ 108.99 back in the day. maybe faster idk.
link to the car https://honda-tech.com/zerothread?id=102818
link to the car https://honda-tech.com/zerothread?id=102818
#12
Honda-Tech Member
Join Date: Feb 2002
Location: CA
Posts: 3,970
Likes: 0
Received 0 Likes
on
0 Posts
Re: All Motor Integra's DC's (JH4DC4-2GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JH4DC4-2GSR »</TD></TR><TR><TD CLASS="quote">
Allmotor18
N/A B18c1? on 22x8x13's
WHP:188
TQ:?
ET: 12.9 @ 105
</TD></TR></TABLE>
This is my OLD 1.8L setup on 91 octane... Chassis was DC2 weighing 2450lbs wit driver...
B18C1 block - 81.5mm JDM ITR pistons, Stock 98 ITR head, Skunk2 Stage 1 cams, ITR valvetrain, Mugen 2-Layer headgasket, ITR intake manifold, ITR TB, Injen shortram intake
188whp/130tq
Allmotor18
N/A B18c1? on 22x8x13's
WHP:188
TQ:?
ET: 12.9 @ 105
</TD></TR></TABLE>
This is my OLD 1.8L setup on 91 octane... Chassis was DC2 weighing 2450lbs wit driver...
B18C1 block - 81.5mm JDM ITR pistons, Stock 98 ITR head, Skunk2 Stage 1 cams, ITR valvetrain, Mugen 2-Layer headgasket, ITR intake manifold, ITR TB, Injen shortram intake
188whp/130tq
#15
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: All Motor Integra's DC's (XtraFastCRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtraFastCRX »</TD></TR><TR><TD CLASS="quote">sinister's got this...
their black dc2 runs 11.3's... correct me if im wrong</TD></TR></TABLE>
11.4X@118mph on the motor.
the 11.3's and 11.2's were with a little juice.
their black dc2 runs 11.3's... correct me if im wrong</TD></TR></TABLE>
11.4X@118mph on the motor.
the 11.3's and 11.2's were with a little juice.
#16
Re: All Motor Integra's DC's (skunked)
Hey, It's been a while sicne I posted on here.
My old car (R.I.P.)
Stock bore GSR w/ CTR pistons, ported b16 head w/JUN 3's and Header Tech header. Made around 215ish to the wheels.
Best time was 13.0 @ 106 with a 1.9ish 60 ft on 22-13-8 M/H.
I'm pretty sure I could of got that e.t. down with a better 60 ft.
There's some old pics in my Bio section.
Thanks,
Johnny Y
My old car (R.I.P.)
Stock bore GSR w/ CTR pistons, ported b16 head w/JUN 3's and Header Tech header. Made around 215ish to the wheels.
Best time was 13.0 @ 106 with a 1.9ish 60 ft on 22-13-8 M/H.
I'm pretty sure I could of got that e.t. down with a better 60 ft.
There's some old pics in my Bio section.
Thanks,
Johnny Y
#17
Honda-Tech Member
Join Date: Mar 2003
Location: Greenville, SC
Posts: 4,027
Likes: 0
Received 0 Likes
on
0 Posts
Re: All Motor Integra's DC's (JH4DC4-2GSR)
I've never put mine on a Dynojet or taken to the drag strip (plenty of times to the other kind of track ).
RLZ built 85x89mm, 11.6:1, pump gas, ATS 4.9, Kumho R Comps, street car.
It put down 209whp at P1 Automotive's Mustang Dyno. It reads 14% lower than the Dynojet down the street. The car also weighs 2283 with a full tank of gas without me in it.
RLZ built 85x89mm, 11.6:1, pump gas, ATS 4.9, Kumho R Comps, street car.
It put down 209whp at P1 Automotive's Mustang Dyno. It reads 14% lower than the Dynojet down the street. The car also weighs 2283 with a full tank of gas without me in it.
#19
Re: All Motor Integra's DC's (Bradstard)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bradstard »</TD></TR><TR><TD CLASS="quote">I've never put mine on a Dynojet or taken to the drag strip (plenty of times to the other kind of track ).
RLZ built 85x89mm, 11.6:1, pump gas, ATS 4.9, Kumho R Comps, street car.
It put down 209whp at P1 Automotive's Mustang Dyno. It reads 14% lower than the Dynojet down the street. The car also weighs 2283 with a full tank of gas without me in it.
</TD></TR></TABLE>
im in love, will you be at the expo?
and how did you get it down to 2283?
not to get off topic...
C5
street tires
13.45 @104
206
138
no spare or seats, weight unknown.
Modified by 1slowcivic at 4:08 PM 2/11/2006
RLZ built 85x89mm, 11.6:1, pump gas, ATS 4.9, Kumho R Comps, street car.
It put down 209whp at P1 Automotive's Mustang Dyno. It reads 14% lower than the Dynojet down the street. The car also weighs 2283 with a full tank of gas without me in it.
</TD></TR></TABLE>
im in love, will you be at the expo?
and how did you get it down to 2283?
not to get off topic...
C5
street tires
13.45 @104
206
138
no spare or seats, weight unknown.
Modified by 1slowcivic at 4:08 PM 2/11/2006
#20
Honda-Tech Member
Join Date: Mar 2003
Location: Greenville, SC
Posts: 4,027
Likes: 0
Received 0 Likes
on
0 Posts
Re: All Motor Integra's DC's (1slowcivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1slowcivic »</TD></TR><TR><TD CLASS="quote">
im in love, will you be at the expo?
and how did you get it down to 2283?
</TD></TR></TABLE>
I'm not going to make it to Expo this year. I've got the car completely gutted. I still have the heater core, ABS, and the dash. Other than that, she's empty.
im in love, will you be at the expo?
and how did you get it down to 2283?
</TD></TR></TABLE>
I'm not going to make it to Expo this year. I've got the car completely gutted. I still have the heater core, ABS, and the dash. Other than that, she's empty.
#22
Re: All Motor Integra's DC's (Felix.)
Bradstard, what make etc are those extractors? I'm from New Zealand, and dont see many extractors of that design. In my JDM 98 ITR with filter 2.25" exhaust, did a 14.2 on road tyres (factory 16" rims) with a 60foot of 2.2 and trap speed 157km/hr (98mph) . Have that engine in a stripped JDM EF7 CRX now with some engine work.
#23
Member
Join Date: Feb 2003
Location: Detroit City, MI, Planet Rock
Posts: 3,427
Likes: 0
Received 1 Like
on
1 Post
Re: All Motor Integra's DC's (NZ Vtec Weapon)
Cool thread since it concerns me. Errrr'one keep the posts coming.
Here's my contribution:
'98 DC, 75k miles (when I made my quickest pass), USDM ITR tranny, 25-ish psi in near bald Yokohama AVS ES100's (195/55/15), Toda Spec A cams, ITR valvetrain, Skunk2 gears, Ebay 3" intake, AN-R IM, DENTED JDM DC Header, 2.5" Carsound Cat, tuned on Uberdata. I make 171.7 whp and 129 ft-lb of torque, and shift at 8500. I removed everything from the rear seats back, including side panels, spare tire, rear seats, cargo cover, etc... left the sounde deadening, car weighed ~2650-ish? ...can't remember.
The results:
14.6 @ 96 mph. I had an absolutely shitty launch though, giving me a 2.4 60'. I'm convinced I could get a low 14 or even tap 13's with some drag slicks.
Here's my contribution:
'98 DC, 75k miles (when I made my quickest pass), USDM ITR tranny, 25-ish psi in near bald Yokohama AVS ES100's (195/55/15), Toda Spec A cams, ITR valvetrain, Skunk2 gears, Ebay 3" intake, AN-R IM, DENTED JDM DC Header, 2.5" Carsound Cat, tuned on Uberdata. I make 171.7 whp and 129 ft-lb of torque, and shift at 8500. I removed everything from the rear seats back, including side panels, spare tire, rear seats, cargo cover, etc... left the sounde deadening, car weighed ~2650-ish? ...can't remember.
The results:
14.6 @ 96 mph. I had an absolutely shitty launch though, giving me a 2.4 60'. I'm convinced I could get a low 14 or even tap 13's with some drag slicks.
#24
Re: All Motor Integra's DC's (alfaaay)
13.8@95mph 2.0 60ft 22x8x13 m&h slicks. 91 integra, 2450 w/ me and interior. check sig for setup. going to try to hit high 12's this year with stock internal itr with just suspension work/ weight reduction and few more engine/ ecu mods.
#25
Honda-Tech Member
Re: All Motor Integra's DC's (91integraLSVTEC)
Well, I don't drive an Integra, but I DO drive a '98 Civic coupe, so it's comparable in weight to you DC chasis guys.
22x8x13 M&H slicks on Lenso's.
Full interior minus rear seats, and no bumper supports.
Waiting on my RMF narrow header, as well as to weld up and install my SMSP 2.5" exhaust. That run was done with JDM DC 4-1 and DC Sports 2.25" catback.
I've only ever made 192whp at the most.
...Sorry to interrupt the DC-palooza.
- Derek
EDIT: I also ran a 13.17 @ 104mph as well. That was the best time that day. I trapped 105mph on a 13.2 pass earlier that day.
22x8x13 M&H slicks on Lenso's.
Full interior minus rear seats, and no bumper supports.
Waiting on my RMF narrow header, as well as to weld up and install my SMSP 2.5" exhaust. That run was done with JDM DC 4-1 and DC Sports 2.25" catback.
I've only ever made 192whp at the most.
...Sorry to interrupt the DC-palooza.
- Derek
EDIT: I also ran a 13.17 @ 104mph as well. That was the best time that day. I trapped 105mph on a 13.2 pass earlier that day.