need a RSX Type S head
 

i need a cylinder head for a RSX Type S.

https://honda-tech.com/zerothread?id=653766

Re: need a RSX Type S head (JDM nerbie)
 

as do i...if you happen to find two....i'll take the other https://honda-tech.com/forums/images/smilies/emwink.gif good luck though..they are somewhat ahrd to comeby

Re: need a RSX Type S head (1abSi)
 

i know, i cant find one anywhere https://honda-tech.com/forums/images/smilies/mad.gif

Re: need a RSX Type S head (JDM nerbie)
 

http://www.car-part.com

Re: need a RSX Type S head (1EuroEp)
 

just got mine the other day it was madd hard to get. how much would you guys say is a good price? jus to make sure i didnt get ripped off https://honda-tech.com/forums/images...es/emsmile.gif

Re: need a RSX Type S head (JoeyBallzSI)
 

well without ecu i would say in the 800 range...give or take 100...and with ecu i would say around 1k give or take 100...for low miles

Re: need a RSX Type S head (1abSi)
 

hmm just checked that link and showed 650 for one...wonder what kind of shap that is in...not bad when you could send you ecu off to hondata and get a reflash and possibly have some good results for about 1250

Re: need a RSX Type S head (1abSi)
 

so thats where you find em! hahah salvage huh! https://honda-tech.com/forums/images/smilies/emthup.gif

man, i have been searching forever for this

Re: need a RSX Type S head (simann)
 

hmmm well after thinking about this in depth..**and i can very easily be wrong**..but, if someone were to do the head swap with the prb ecu...we would at best only have 10:1 compression with a thinner head gasket...but the ecu would think it was the A2 motor with the 11:1 compression, thus making it run richer than needed...not sure by how much, but i would think a noticable difference. so that would mean staying with the pnl ecu which would still leave the vtec at 2200 and 6800 redline....but the swap is to get rid of those two...i suppose that is why Jack (b18cxr) is still on the pnl ecu....awaiting a stand alone...if i am wrong feel free to correct me....i would actually like to be wrong in this, so that way i could do it this way and come out with good results.... https://honda-tech.com/forums/images/smilies/embeer.gif

Re: need a RSX Type S head (1abSi)
 

I thought as compression raises, the fuel to air ratio thins out? Well, skunk 2 did it, and a friend of mine, which i havnt seen in about 1/2 a year has done it to his Si. Every one in my town is just saying.."his car is REALLY fast" . All you need is just a v-tec controller. anyways, its not that big a deal.

Re: need a RSX Type S head (1abSi)
 

word thats good shit i got mine for 400 https://honda-tech.com/forums/images...es/emsmile.gif

Re: need a RSX Type S head (JoeyBallzSI)
 

Buy it new...You really think some type s owner is going to drop his head? for no reason? A GSR head can go for 1k with no prob or a type r......This I see at over 1500

Re: need a RSX Type S head (1abSi)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1abSi &raquo;</TD></TR><TR><TD CLASS="quote">hmmm well after thinking about this in depth..**and i can very easily be wrong**..but, if someone were to do the head swap with the prb ecu...we would at best only have 10:1 compression with a thinner head gasket...but the ecu would think it was the A2 motor with the 11:1 compression, thus making it run richer than needed...not sure by how much, but i would think a noticable difference. so that would mean staying with the pnl ecu which would still leave the vtec at 2200 and 6800 redline....but the swap is to get rid of those two...i suppose that is why Jack (b18cxr) is still on the pnl ecu....awaiting a stand alone...if i am wrong feel free to correct me....i would actually like to be wrong in this, so that way i could do it this way and come out with good results.... https://honda-tech.com/forums/images/smilies/embeer.gif </TD></TR></TABLE>

I thought the ecu that came on the EP3 and the RSX S rewrites fuel maps according to variables thrown at it?

Re: need a RSX Type S head (JDM nerbie)
 

I believe "racerdan" had one for sale...skunk2 makes a RSX head too (I believe) https://honda-tech.com/forums/images/smilies/emthup.gif