For Sale and WTB: June/July 2016
#1
ProFunction/GT Motoring
Thread Starter
Join Date: May 2001
Location: IL
Posts: 4,930
Likes: 0
Received 0 Likes
on
0 Posts
For Sale and WTB: June/July 2016
Sorry guys the month went by too fast and it needs a new thread.
All parts are to be ITR related or it will be removed.
All items for sale must have a price posted or the item will be removed.
If someone posts a FS price and you disagree, don't buy or comment on it.
Anyone posting multiple items please try to use one post.
Don't quote a post with pics repeated, or don't quote your own post.
Comments need to be through email or PM - All unrelated posts would be deleted.
All parts are to be ITR related or it will be removed.
All items for sale must have a price posted or the item will be removed.
If someone posts a FS price and you disagree, don't buy or comment on it.
Anyone posting multiple items please try to use one post.
Don't quote a post with pics repeated, or don't quote your own post.
Comments need to be through email or PM - All unrelated posts would be deleted.
#2
H-T Order of Merit
FS: ITR ENGINE (SHORT BLOCK)
ITR ENGINE (SHORT BLOCK)
This short block is from the original engine from my 2001 Integra Type R, with 77,000 miles on it. WARNING, it is using a lot of oil. Last year it was starting to use oil (a quart every 700 street miles) so I decided to get it rebuilt. First, it was rebuilt with the cylinders being honed and using new pistons, valves, rings, oil pump, etc., but after the rebuild it was using even more oil (a quart every 200 miles). It was then rebuilt again; we noticed that the valve stems were loose in the valve guides, so we replaced the valve guides with new. But even after that rebuild, it was still using a quart every 200 miles. So I decided to buy a new short block for my ITR, and I am selling the old one, with full disclosure that it is using this much oil.
I am selling this short block for $1250 firm (no haggling, please). You can pay cash upon pickup, or you can pay by check if I can allow two weeks for the check to clear. I'll also take Paypal with a total price of $1290 that covers the Paypal fees. I'll give preference to anyone willing to pick it up in the Chicago area. I can also ship it and the buyer will pay the shipping costs in addition to these prices.
Contact me via Private Message or e-mail.
This short block is from the original engine from my 2001 Integra Type R, with 77,000 miles on it. WARNING, it is using a lot of oil. Last year it was starting to use oil (a quart every 700 street miles) so I decided to get it rebuilt. First, it was rebuilt with the cylinders being honed and using new pistons, valves, rings, oil pump, etc., but after the rebuild it was using even more oil (a quart every 200 miles). It was then rebuilt again; we noticed that the valve stems were loose in the valve guides, so we replaced the valve guides with new. But even after that rebuild, it was still using a quart every 200 miles. So I decided to buy a new short block for my ITR, and I am selling the old one, with full disclosure that it is using this much oil.
I am selling this short block for $1250 firm (no haggling, please). You can pay cash upon pickup, or you can pay by check if I can allow two weeks for the check to clear. I'll also take Paypal with a total price of $1290 that covers the Paypal fees. I'll give preference to anyone willing to pick it up in the Chicago area. I can also ship it and the buyer will pay the shipping costs in addition to these prices.
Contact me via Private Message or e-mail.
#3
H-T Order of Merit
FS: Steelies, Harness Bar
Steelies (Black Steel Wheels)
Set of four 15" steel wheels for the ITR in good condition. Perfect for a set of winter tires. $65 plus shipping; free local pickup in the Chicago area available.
Contact me via Private Message or e-mail.
ITR Harness Bar
This mounts to the A-pillars, no cutting needed. Very good condition. $150 plus shipping. Local pickup available in the Chicago area.
Contact me via Private Message or e-mail.
Set of four 15" steel wheels for the ITR in good condition. Perfect for a set of winter tires. $65 plus shipping; free local pickup in the Chicago area available.
Contact me via Private Message or e-mail.
ITR Harness Bar
This mounts to the A-pillars, no cutting needed. Very good condition. $150 plus shipping. Local pickup available in the Chicago area.
Contact me via Private Message or e-mail.
#4
Re: For Sale and WTB: June/July 2016
for sale
NEW :
rear trunk bar $35 flaky paint
usdm Driver seat rail * some rust sold
usdm driver headrest sold
thermo switch $25
iavc newish valve $55
new in bag thermo unit $20
S2000 cr all black wheel nutkit and lock nut $90
soda blasted valve cover ready for paint SOLD
jdm 4-1 header lower cover $20
Jdm hid washing bottle and flex spout $20
New jdm shifting rod set $Sold(waited 3 month fr japan )
rear calipers set $50 need rebuilt
abs cervo and line $50
ABS COMPUTER
ob1 chip computer $35
new fuel filter and mounting bracket $sold
new breather box $25
mint mint rear all red tailight $70
bare front center console usdm sold
front new \A acura emblem $35
46374-ST7-A11 new discontinued brake line
power stering rebuilt kit $35 with bearing and all seal and bolts
window corner clips (6)discontinued corner clips $25
discontinued rubber cowl /hinges cover sold
jdm fog light switch sold
new horn and harness tail SOlD
NEW rear sway bar endlink set $30
ac line ...ect rad condenser compressor $50
Vibrant EXHAUST component all for $200
Please add at least $15 shipping for small stuff $25-30 for bigger stuff thanks
and location
i ship fedex signature required from Michigan or Canada thanks again
1x vibrant Ultra quiet resonator 2.5 icnh
2x vibrant 6inch flex pipe 2.5 inch
4x 2.5 inch ss v-band obxr Thick flange
NEW :
rear trunk bar $35 flaky paint
usdm Driver seat rail * some rust sold
usdm driver headrest sold
thermo switch $25
iavc newish valve $55
new in bag thermo unit $20
S2000 cr all black wheel nutkit and lock nut $90
soda blasted valve cover ready for paint SOLD
jdm 4-1 header lower cover $20
Jdm hid washing bottle and flex spout $20
New jdm shifting rod set $Sold(waited 3 month fr japan )
rear calipers set $50 need rebuilt
abs cervo and line $50
ABS COMPUTER
ob1 chip computer $35
new fuel filter and mounting bracket $sold
new breather box $25
mint mint rear all red tailight $70
bare front center console usdm sold
front new \A acura emblem $35
46374-ST7-A11 new discontinued brake line
power stering rebuilt kit $35 with bearing and all seal and bolts
window corner clips (6)discontinued corner clips $25
discontinued rubber cowl /hinges cover sold
jdm fog light switch sold
new horn and harness tail SOlD
NEW rear sway bar endlink set $30
ac line ...ect rad condenser compressor $50
Vibrant EXHAUST component all for $200
Please add at least $15 shipping for small stuff $25-30 for bigger stuff thanks
and location
i ship fedex signature required from Michigan or Canada thanks again
1x vibrant Ultra quiet resonator 2.5 icnh
2x vibrant 6inch flex pipe 2.5 inch
4x 2.5 inch ss v-band obxr Thick flange
#5
Honda-Tech Member
iTrader: (10)
Join Date: Apr 2003
Location: TN, USA
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
Please call or text for faster response.
Travis 423-488-3775
Driveshaft Shop DSS 3.9 Axles, with 850hp intermediate shaft. Hubs are in EG/DC2 knuckles with new wheel bearings, new lower ball joints and ARP extended studs. $1000 shipped
BWR Catch Can. SOLD
B Series Valve Cover with -10an fittings for catch can setup. Painted with Automotive PPG paint. $100 plus shipping. SOLD
EG/DC2 Hasport Black Anodized Engine Mounts (Street Rubber 62A). Brand new, 12 miles. Sold
Edlebrock B Series 65mm Throttle Body with 3 Bar Map Sensor. Part number 4789. $200. Comes with Mishimoto 2.75’-2.5” reducer.
B Series AEM High Volume Fuel rail with fittings, and extra –an fitting. Comes with B&M pressure gauge. 12 miles total. Basically new. SOLD
B Series AEM Fuel Pressure Regulator with upgraded 90 degree banjo fitting. SOLD
B/D Series RC550cc Injectors. Part No. SL9-550. Less than 1000 miles. $300 shipped.
Mugen Gen 2 Rear Bar for EG/DC2. Almost Perfect Shape. SOLD
Travis 423-488-3775
Driveshaft Shop DSS 3.9 Axles, with 850hp intermediate shaft. Hubs are in EG/DC2 knuckles with new wheel bearings, new lower ball joints and ARP extended studs. $1000 shipped
BWR Catch Can. SOLD
B Series Valve Cover with -10an fittings for catch can setup. Painted with Automotive PPG paint. $100 plus shipping. SOLD
EG/DC2 Hasport Black Anodized Engine Mounts (Street Rubber 62A). Brand new, 12 miles. Sold
Edlebrock B Series 65mm Throttle Body with 3 Bar Map Sensor. Part number 4789. $200. Comes with Mishimoto 2.75’-2.5” reducer.
B Series AEM High Volume Fuel rail with fittings, and extra –an fitting. Comes with B&M pressure gauge. 12 miles total. Basically new. SOLD
B Series AEM Fuel Pressure Regulator with upgraded 90 degree banjo fitting. SOLD
B/D Series RC550cc Injectors. Part No. SL9-550. Less than 1000 miles. $300 shipped.
Mugen Gen 2 Rear Bar for EG/DC2. Almost Perfect Shape. SOLD
Last edited by slo4door; 07-15-2016 at 06:53 PM.
#6
Honda-Tech Member
iTrader: (1)
Join Date: Jul 2001
Location: ainrofilac, Anti Stickers
Posts: 5,071
Likes: 0
Received 1 Like
on
1 Post
Re: For Sale and WTB: June/July 2016
All parts located in OC, Socal, and local pick up only.
BNIB Mugen Sport Pedals - $180
Mugen Hood - $3500
Mugen Front Bumper - $1400
Mugen Intake - $500
Mugen Front strut bar - $350
JDM 4-1 header with lower heatshield no dents - $350
JDM ITR Radiator Support (brand new) - $500
JDM ITR HID headlights - $600
JDM ITR Lip - $250
JDM ITR Grill - $80
Carbing 1st gen front strut bar - $250
BNIB Mugen Sport Pedals - $180
Mugen Hood - $3500
Mugen Front Bumper - $1400
Mugen Intake - $500
Mugen Front strut bar - $350
JDM 4-1 header with lower heatshield no dents - $350
JDM ITR Radiator Support (brand new) - $500
JDM ITR HID headlights - $600
JDM ITR Lip - $250
JDM ITR Grill - $80
Carbing 1st gen front strut bar - $250
Last edited by Seedc2; 07-06-2016 at 06:54 AM.
Trending Topics
#8
Re: For Sale and WTB: June/July 2016
Price: $2,500
Trades: MF10 16" only with or without tires don't matter
Contact: 860-986-4859 call or text.
Location: CT area willing to meet up for trades if purchased has to be picked up and if shipped it can be discussed further.
specs:
16x8+45
16x7 +45
205/45/16 Yokohama s drives all around as of 7/1/16 no vibrations or shaking at all!
Tires are brand new!
Condition:
No bends or cracks
The 16x8 are original finish
16x7 original color but were resprayed in exact color code.
Wheels are 9/10 being very picky due to not all being the original finish.
Trades: MF10 16" only with or without tires don't matter
Contact: 860-986-4859 call or text.
Location: CT area willing to meet up for trades if purchased has to be picked up and if shipped it can be discussed further.
specs:
16x8+45
16x7 +45
205/45/16 Yokohama s drives all around as of 7/1/16 no vibrations or shaking at all!
Tires are brand new!
Condition:
No bends or cracks
The 16x8 are original finish
16x7 original color but were resprayed in exact color code.
Wheels are 9/10 being very picky due to not all being the original finish.
#9
Honda-Tech Member
iTrader: (4)
Join Date: Sep 2006
Location: Fl, usa
Posts: 4,175
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
1998 ITR head with JUN springs and retainers $900
ITR Intake manifold, fuel rail, injectors and IACV $300
ITR Intake manifold with IACV (very clean, low mileage) $150
USDM ITR valve cover $100
( cut for valve adjustment)
ITR alternator $50
ITR transmission bracket (trimmed for big tube header) $45
ITR intermediate shaft $50
Distributer cap with oem wires $25
NGK blue wires $50
ITR flywheel $75
ITR Intake manifold, fuel rail, injectors and IACV $300
ITR Intake manifold with IACV (very clean, low mileage) $150
USDM ITR valve cover $100
( cut for valve adjustment)
ITR alternator $50
ITR transmission bracket (trimmed for big tube header) $45
ITR intermediate shaft $50
Distributer cap with oem wires $25
NGK blue wires $50
ITR flywheel $75
Last edited by Devon M; 07-21-2016 at 02:11 AM.
#12
Honda-Tech Member
iTrader: (10)
Join Date: Apr 2003
Location: TN, USA
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
The 97R I purchased came with these Fikse Forged wheels/tires. Very high end rims, 2 piece design, 10 spoke. Almost new Nitto Neogen Tires, 215/40-17. Will get offset and width from Fikse tomorrow.
$2500 shipped in the US.
Please text or call if interested. More pictures available upon request.
Travis 423-488-3775
On the 97R......
One rim did have a weld repair but no sign of leaking. Quality job.
$2500 shipped in the US.
Please text or call if interested. More pictures available upon request.
Travis 423-488-3775
On the 97R......
One rim did have a weld repair but no sign of leaking. Quality job.
#15
Honda-Tech Member
Join Date: Jun 2008
Location: Houston, Tx, USA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
ITR wheels gunmetal. 8.5/10 condition asking 550 no center caps. Shipping will be @ buyers expense. Located in Cypress tx.
#16
Honda-Tech Member
Join Date: Sep 2007
Location: Midwest
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
FS: Password JDM carbon fiber B series intake
Password:JDM Dry Carbon Fiber PowerChamber Intake 94-01 Integra Type R / LS / RS | Password JDM
$140 shipped
Password:JDM Dry Carbon Fiber PowerChamber Intake 94-01 Integra Type R / LS / RS | Password JDM
$140 shipped
#20
Honda-Tech Member
Re: For Sale and WTB: June/July 2016
Work RSZ-Rs 16x7.5 +26 powdercoated RAL 9010 (closest to CW) with closed ended Work Lugnuts torqued and removed once. $2000 USD plus shipping.
New in unopened package UKDM/EDM clear corners $250 USD shipped from 20901.
New in open box never installed JDM B-Series valve cover, Spoon v2 plug cover, Feel's oil cap (prefer not to part) $400 USD shipped from 20901.
New in unopened package UKDM/EDM clear corners $250 USD shipped from 20901.
New in open box never installed JDM B-Series valve cover, Spoon v2 plug cover, Feel's oil cap (prefer not to part) $400 USD shipped from 20901.
Last edited by dc24me; 07-14-2016 at 06:34 PM.
#21
Honda-Tech Member
Join Date: Jan 2016
Location: in a home
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
Mugen exhaust system off my itr. Has a dent from privious owner but does not leak or affect performance. Has a few scratches. Could use a nice deep clean.
$500. Will ship at buyers expense. Located in Washington starte. 98387.
PM for more pics and info. Don't really go on here much.
Email: joeysilva80@yahoo.com
$500. Will ship at buyers expense. Located in Washington starte. 98387.
PM for more pics and info. Don't really go on here much.
Email: joeysilva80@yahoo.com
#24
Honda-Tech Member
iTrader: (2)
Join Date: Feb 2004
Location: NJ
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
For sale
Fujitsubo rm10a catback exhaust $500
T1R resonated cat $100
T1R axleback muffler $150
Jdm 4-1 Itr header with heat shields $400
Jdm black recaros 8.5/10 $1000
SSR TYPE C WHEELS 16x7 +42 $1000
Email: dalves28@aol.com
Text: 908-868-41five five
Can send more pics through email or text
Fujitsubo rm10a catback exhaust $500
T1R resonated cat $100
T1R axleback muffler $150
Jdm 4-1 Itr header with heat shields $400
Jdm black recaros 8.5/10 $1000
SSR TYPE C WHEELS 16x7 +42 $1000
Email: dalves28@aol.com
Text: 908-868-41five five
Can send more pics through email or text
#25
Honda-Tech Member
Join Date: Dec 2003
Location: Craig from QC
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale and WTB: June/July 2016
Hi,
FS is a BNIB Mugen metal head gasket for B-Series, opened it up for install once. Asking 130$ shipped.
A two-layer construction is used instead of the normal three-layer gasket plate construction, and a rib (+0.07mm) is laser-welded close to the plate surface sleeve to prevent blowout occurring at high compression.
This head gasket raises the compression ratio by 0.4 points. Construction is entirely of stainless steel.
I alsi have these BNIB AEM B-Series Tru-Time ajustable Cam gears in anodized red for sale. Asking 120$ shipped.
Thanks!
FS is a BNIB Mugen metal head gasket for B-Series, opened it up for install once. Asking 130$ shipped.
A two-layer construction is used instead of the normal three-layer gasket plate construction, and a rib (+0.07mm) is laser-welded close to the plate surface sleeve to prevent blowout occurring at high compression.
This head gasket raises the compression ratio by 0.4 points. Construction is entirely of stainless steel.
I alsi have these BNIB AEM B-Series Tru-Time ajustable Cam gears in anodized red for sale. Asking 120$ shipped.
Thanks!
Last edited by Mugen Type R; 07-29-2016 at 05:09 PM.