Realtime Splitter / Undertray Information
 

From Andrew:
================================================== =====
I will be selling them on a made to order basis (2-3 weeks) for $400
(shipping is extra). This includes the lip and undertray and does not
include mounting hardware -- I just used 8 dzus fasteners on the bumper.

If you would like to purchase the pieces separately, the lip is $300 and
the undertray is $100. The lip is constructed of fiberglass and the
undertray is 10mm expanded PVC sheet. Originally, I had it constructed out of
Carbon fiber and honeycomb. However, after one off-track experience that
destroyed it, I realized that we needed to make it out of more "affordable"
materials. The result was a fiberglass piece that was MUCH more rigid, with a
minimal increase in weight. The dimensions are also to World Challenge
requirements. The lip itself is about 2 inches lower than the factory
ITR lip.

Unfortunately, I didn't take any pictures of it before I sold the R, but
I will have the new owner snap a few pics and send them to me in the next
few days. Once I receive them, I will forward them to you.

If you have any other questions, please feel free to ask.

Thanks,
Andy

================================================== ========
Please look here for more information, as I dont really think it would be cool to flood his inbox with repeated questions.. ask them here and what I cant answer, I will forward to him.

Re: Realtime Splitter / Undertray Information (Chris)
 

I am going to guess that the undertray does not have to be used with the lip? Just trying to be absolutely sure http://images.zeroforum.com/smile/emsmile.gif

Thanks!

Re: Realtime Splitter / Undertray Information (JohnnyK)
 

correct.

Dont forget it will have to be painted as well. (Krylon 0wnZ)

Re: Realtime Splitter / Undertray Information (carl_aka_carlos)
 

They are replicas.. more info will be posted as I get it.

Re: Realtime Splitter / Undertray Information (Chris)
 

Chris,

Thanks for helping out everyone when you really didn't have to. http://images.zeroforum.com/smile/emthup.gif http://images.zeroforum.com/smile/emsmile.gif

Re: Realtime Splitter / Undertray Information (Reid)
 

Now you tell me! http://images.zeroforum.com/smile/emwink.gif
I just picked up one of these:
http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx

But am always open to the possibilities.
I could probably make use of at least an undertray and a set of some dzus fasteners, because I don't think this thing would survive long on the streets around here.

Re: Realtime Splitter / Undertray Information (Reid)
 

I don't know if this was directed at me, I was actually trying to inquire about only purchasing the undertray, not the lip. Sorry if I confused anyone!!

Re: Realtime Splitter / Undertray Information (goern-R)
 

what about the rear understray?
don't we need to balance out the front and the rear.

Re: Realtime Splitter / Undertray Information (papasuperman)
 

A rear undertray (diffuser) would be nice but normally the rear "touring" wing is apparently enough to "balance" the front splitter.

Chris -- sorry about the side tracking of the present topic with my pic. Ed

Re: Realtime Splitter / Undertray Information (paste)
 

No really im serious in the undertray without the lip because i have a tendency to hit curbs http://images.zeroforum.com/smile/emhammer.gif

Re: Realtime Splitter / Undertray Information (paste)
 

Forgive me for my ignorance but could you clarify how the undertray would mount to an OEM Type-R lip? This looks tempting...

Shingo

note
 

Speaking of undertrays...

http://www.we-todd-did-racing.com/we...EzZGZkMzF5NTQx

Re: Realtime Splitter / Undertray Information (Chris)
 

u got my interest... but what is a dzus?

Re: Realtime Splitter / Undertray Information (d8168055)
 

Oh boy...every race-car-driver-wannabe should know what dzus fasteners are. http://images.zeroforum.com/smile/emsmilep.gif

Check it.
http://www.kartek.com/race/dzus-num5fasteners.jpg

In short, it allows for convenient & quick removal of any body part. All it takes is a single turn (or less) of the screw. And voila! The body piece is fastened just like that.

Honestly, I just like the way "dzus" is pronounced. http://images.zeroforum.com/smile/emsmile.gif

Re: Realtime Splitter / Undertray Information (Mario)
 

Turns out I was incorrect in assuming it was a Realtime Replica.. SORRY!

From Andy:

One quick clarification. I want to make it clear that my lip and
undertray are not a copy of the Realtime setup. I will send the pics as soon as I
receive them.


So.. you will all have to just wait for pics.

Sorry again.

Re: Realtime Splitter / Undertray Information (vapors2k)
 

BTW, there's a Japanese company called Beat Rush that is offering a vented aluminum underpanel for the DC2 (JY18,000).

Re: Realtime Splitter / Undertray Information (Mario)
 

how is it pronounced?

Re: Realtime Splitter / Undertray Information (d8168055)
 

zeus tabs. ...

Re: Realtime Splitter / Undertray Information (Chris)
 

Is the undertray compatible with a 94-97 Comptech Type R front lip? If so, I would be interested in purchasing one. Also, does anyone know if a rear diffuser has ever been engineered for the DC2?
http://www.ocf.berkeley.edu/~nirad/Integra55.jpg
http://www.ocf.berkeley.edu/~nirad/integra12.jpg

Re: Realtime Splitter / Undertray Information (Zygspeed)
 

Pleeeeease show me some pics on the car.

Re: Realtime Splitter / Undertray Information (94integrals)
 

No, the extended air dam is molded to fit the 98+ bumper design. The undertray is a flat sheet that bolts to the bottom of the air dam extension, so if you want to make up some sort of mounting scheme, it's possible, but not that easy.

Re: Realtime Splitter / Undertray Information (zyg)
 

Forget hte car being done, go slap it on real quick, c'moooooon man.

Re: Realtime Splitter / Undertray Information (Chris)
 

Let us know, how the deal turns out, because I'm very interested in purchasing both products.
Cal

Re: Realtime Splitter / Undertray Information (94integrals)
 

I am (was) working on a rear diffuser, and full-body undertray for my DC2. You can purchase a 4' by 8' sheet of ABS plastic from a local sign shop for less than $80. It comes black, (or any color you want) and is very easy to work with.

I have put this project aside due to the summer temps here in TX, (I don't have a garage to work in.)

You can use sheets of cardboard (displayboard works well for the final template) to test fit and create templates before you actually fabricate the pieces from plastic.

Another thing to keep in mind is that, if you are (very) well funded, you can use the plastic as a mold to lay CF on. I would only recomment this for track drivers though, as CF would not last on most city streets. It is not impact resistant like ABS and PVC.

Re: Realtime Splitter / Undertray Information (WOTTEG)
 

good post wotteg...time to go look at the local sign shops.

I think I will take the car to the lift and to some templating.