Piston /valve contact
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2012
Location: Lancashire, England
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Piston /valve contact
Hi I locked the vtec rockers and tried to get the limits by fully adv intake +10 and retard exhaust - 10 on aem tru time gears but no contact, same when both cams are adv +10 and ret - 10. Head is definatley skimmed, b20 block was skimmed once by me too. Oem b20 headgasket used. Camshafts are edelbrock 4730, pistons are ycp cast (ITR or b16a spec not sure). Am I doing something wrong because that's alot of adjustment with high lift cams although they've got relatively low duration. Anybody help?
Thread
Thread Starter
Forum
Replies
Last Post
qais_vtec
All Motor / Naturally Aspirated
4
09-04-2018 10:42 PM
eg2oreg6watuwant
Honda Civic / Del Sol (1992 - 2000)
6
02-11-2007 02:58 PM
2 0 3
All Motor / Naturally Aspirated
6
08-17-2003 06:45 PM
Shark Tank
Acura Integra Type-R
4
09-20-2002 01:13 PM