Cars For Sale: Integra TYPE-R's - September/October 2010
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Northern Virginia
Posts: 2,787
Likes: 0
Received 0 Likes
on
0 Posts
Cars For Sale: Integra TYPE-R's - September/October 2010
This will serve as the Integra TYPE-R "FOR SALE" thread.
This is for whole ITR vehicles only and will not have any parts for sale or parting out of such.
This is for YOUR CAR only. No "heads up" or links to auction sites for cars that do not belong to you.
Please refrain from replying with comments in this thread. If you would like to contact the seller, please contact them through PM or email.
No quoting with all the pics repeated, don't reply or quote your own post.
This is for whole ITR vehicles only and will not have any parts for sale or parting out of such.
This is for YOUR CAR only. No "heads up" or links to auction sites for cars that do not belong to you.
Please refrain from replying with comments in this thread. If you would like to contact the seller, please contact them through PM or email.
No quoting with all the pics repeated, don't reply or quote your own post.
#2
Honda-Tech Member
Join Date: Oct 2008
Location: Oakland, Maine
Posts: 1,004
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
EDIT: price drop $12,500 obro
Alright guys I really hate to be posting this but alls well must end well I guess.
Real deal JDM ITR 96spec, mileage is about 100k registered, titled, NO TRADES NO TRADES NO TRADES email for more info/pics cam.swett@gmail.com
Interior:
NRG slim hub matched with a NRG version 1 quick release and a Nardi deepcorn steering wheel, takata harnesses, F1Spec seats
Exterior:
J's Racing CF air duct
Engine:
B18C5 type R motor with Buddy Club Spec IV cams, Rocket motorsports Valve springs and retainers, ARP Head studs, AEM Cam gears, Skunk 2 intake manifold,Password JDM Carbon Fiber Intake, AEM fuel rail, B and M FPR with gauge, Hy-tech Replica header with nitrate coating, Skunk2 Mega Power R,T1R Test Pipe, Hasport billit motor mounts.
Hondata S-100 computer
ACT stage 3 6 puck clutch with stock ITR flywheel
Suspension:
Apexi world sport full coilovers,TDM rear X bars, Bennen tripod front strut bar
Original GAB sports 16x7 +45 offset and a fifth(spare) 16x7 +32 offset
Alright guys I really hate to be posting this but alls well must end well I guess.
Real deal JDM ITR 96spec, mileage is about 100k registered, titled, NO TRADES NO TRADES NO TRADES email for more info/pics cam.swett@gmail.com
Interior:
NRG slim hub matched with a NRG version 1 quick release and a Nardi deepcorn steering wheel, takata harnesses, F1Spec seats
Exterior:
J's Racing CF air duct
Engine:
B18C5 type R motor with Buddy Club Spec IV cams, Rocket motorsports Valve springs and retainers, ARP Head studs, AEM Cam gears, Skunk 2 intake manifold,Password JDM Carbon Fiber Intake, AEM fuel rail, B and M FPR with gauge, Hy-tech Replica header with nitrate coating, Skunk2 Mega Power R,T1R Test Pipe, Hasport billit motor mounts.
Hondata S-100 computer
ACT stage 3 6 puck clutch with stock ITR flywheel
Suspension:
Apexi world sport full coilovers,TDM rear X bars, Bennen tripod front strut bar
Original GAB sports 16x7 +45 offset and a fifth(spare) 16x7 +32 offset
Last edited by Thundercleese; 09-07-2010 at 03:45 PM.
#3
Honda-Tech Member
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
2000 PY ITR Shell FS:
63k miles on shell
Was previously involved in an accident, was totaled by insurance company. I purchased the car and rebuilt it strictly for a track car. It is as you see in the pics. I still have the clean, original title so the car can be registered with it and title wiped clean if that is important to you.
Will come with original cluster showing mileage, service history from the original owner, 5 lug, OEM brakes. The car has a full 6 point weld in roll cage (car was originally built to be a Honda Challenge car) Headlights are there, but not wired in. Full shell without OEM spoiler, but bumpers, fenders and all that are there. Rear quarter glass has been removed and replaced with Lexan. Stock sway bars included. Nothing in the interior other than cage, dash and cluster along with Momo Monte Carlo steering wheel and NRG quick release hub.
Lastly the suspension will be stock and all bushings have been replaced with the PIC bushing kit. I believe it was 24 or 26 pieces in all.
I'm asking 6k and pretty firm on it.
Contact method would be PM or email at bspandora at live.com Other parts seen in pics will be sold separately in another thread.
Was asked so I went ahead and took new pics. Pushed the car out of the garage and washed her.
Does NOT come with spoiler, SW388's, Spoon Twin blocks, mounts, rad hoses, ECU, seats. I do have the corner lenses however.
63k miles on shell
Was previously involved in an accident, was totaled by insurance company. I purchased the car and rebuilt it strictly for a track car. It is as you see in the pics. I still have the clean, original title so the car can be registered with it and title wiped clean if that is important to you.
Will come with original cluster showing mileage, service history from the original owner, 5 lug, OEM brakes. The car has a full 6 point weld in roll cage (car was originally built to be a Honda Challenge car) Headlights are there, but not wired in. Full shell without OEM spoiler, but bumpers, fenders and all that are there. Rear quarter glass has been removed and replaced with Lexan. Stock sway bars included. Nothing in the interior other than cage, dash and cluster along with Momo Monte Carlo steering wheel and NRG quick release hub.
Lastly the suspension will be stock and all bushings have been replaced with the PIC bushing kit. I believe it was 24 or 26 pieces in all.
I'm asking 6k and pretty firm on it.
Contact method would be PM or email at bspandora at live.com Other parts seen in pics will be sold separately in another thread.
Was asked so I went ahead and took new pics. Pushed the car out of the garage and washed her.
Does NOT come with spoiler, SW388's, Spoon Twin blocks, mounts, rad hoses, ECU, seats. I do have the corner lenses however.
#4
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
FS: 2000 Acura Integra Type R (Black)
Purchased new-ONE original owner
Clean Title
69,XXX Original miles
NO MODIFICATIONS EVER – 100% stock for entire life of vehicle
Adult owned driven – never raced or tracked
All scheduled maintenance – properly maintained
LoJack installed
4 brand new tires (Yokohama S drive) - Second set of steel wheels / all season tires included
Carfax report available upon request
Incredible car: “the performance standard against which all other small cars must be judged.” One of the finest Honda/Acuras ever produced, don’t miss your chance at owning a piece of Honda’s history. I will be sad to see it go, but my wife just had a baby moved to a house without a garage. Would like to sell to a fellow Honda enthusiast to make sure it’s well taken care of for the rest of its life. Asking $15,750 (price recently reduced), serious inquiries only (reasonable offers will be entertained - no trades). Email (vnovaitr@gmail.com) or PM me if you have any questions about the car.
Purchased new-ONE original owner
Clean Title
69,XXX Original miles
NO MODIFICATIONS EVER – 100% stock for entire life of vehicle
Adult owned driven – never raced or tracked
All scheduled maintenance – properly maintained
LoJack installed
4 brand new tires (Yokohama S drive) - Second set of steel wheels / all season tires included
Carfax report available upon request
Incredible car: “the performance standard against which all other small cars must be judged.” One of the finest Honda/Acuras ever produced, don’t miss your chance at owning a piece of Honda’s history. I will be sad to see it go, but my wife just had a baby moved to a house without a garage. Would like to sell to a fellow Honda enthusiast to make sure it’s well taken care of for the rest of its life. Asking $15,750 (price recently reduced), serious inquiries only (reasonable offers will be entertained - no trades). Email (vnovaitr@gmail.com) or PM me if you have any questions about the car.
#5
Honda-Tech Member
Join Date: May 2004
Location: New Jersey
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
SOLD!!!!!!!!!!!!!!!
1998 Integra Type R #335,
Clean title in hand, 88K original miles/motor/trans, clean exterior, mint interior, original paint w/ all vins on body panels, original glass all around, not daily driven, 100% garaged on battery tender mostly stock with light mods:
-Aem intake, Mugen 4-1 header, Mugen twin-loop exhaust, ACT clutch, ACT flywheel, Tein Type RA 14K/10K coilovers, Mugen bushings, Skunk2 Pro+ camber kits F+R, extended wheel studs, JDM 23mm rear swaybar, Goodridge brake lines, hawk Hp+ pads, new DBA4000 slotted rotor, motul fluid, custom alarm, custom alignment, corner balanced setup ready to go.
Timing belt/water pump service done, New Brake master cylinder,
stock untouched ECU, prob some other misc parts I'm forgetin right now...
Will include full A/C system (not installed) (will reinstall upon request) and some stock parts..
Engine/trans runs 100%, everything 100%, needs nothing...
meticulously adult Honda/Acura Technician owned/serviced/driven, please serious buyers only email or message me for more info.
Price: $12,399!!!!
(willing to removed parts to lower price if needed)
Trades: S2000, Ducati 848/1098/1198, Yamaha R6/R1, no FWD cars please.
Cash on your end or my end if needed
more pics/info upon request
Email: Jdmdc2r01@yahoo.com
Car located in central NJ
1998 Integra Type R #335,
Clean title in hand, 88K original miles/motor/trans, clean exterior, mint interior, original paint w/ all vins on body panels, original glass all around, not daily driven, 100% garaged on battery tender mostly stock with light mods:
-Aem intake, Mugen 4-1 header, Mugen twin-loop exhaust, ACT clutch, ACT flywheel, Tein Type RA 14K/10K coilovers, Mugen bushings, Skunk2 Pro+ camber kits F+R, extended wheel studs, JDM 23mm rear swaybar, Goodridge brake lines, hawk Hp+ pads, new DBA4000 slotted rotor, motul fluid, custom alarm, custom alignment, corner balanced setup ready to go.
Timing belt/water pump service done, New Brake master cylinder,
stock untouched ECU, prob some other misc parts I'm forgetin right now...
Will include full A/C system (not installed) (will reinstall upon request) and some stock parts..
Engine/trans runs 100%, everything 100%, needs nothing...
meticulously adult Honda/Acura Technician owned/serviced/driven, please serious buyers only email or message me for more info.
Price: $12,399!!!!
(willing to removed parts to lower price if needed)
Trades: S2000, Ducati 848/1098/1198, Yamaha R6/R1, no FWD cars please.
Cash on your end or my end if needed
more pics/info upon request
Email: Jdmdc2r01@yahoo.com
Car located in central NJ
Last edited by B18ek; 09-11-2010 at 06:58 AM.
#7
Snipper Snapper
iTrader: (2)
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
Looking to sell my 1996 CW - Right Hand Drive - Integra Type R - It is real and registered
96,000 km aka 60kish miles
Some of the mods/stock options on the car:
Tein Flex
Original 4x114.3 setup with Blitz Wheels
Project Mu front brake rotors
OEM Wing
OEM lip
DC header
Apexi N1 exhaust
Skunk2 camber kit
ITR front strut bar
Rear strut bar
USDM shift ****
J's racing front scoop
Non hid jdm front
USDM ITR front seats
Jdm itr rear seats
Mugen Steering wheel or Nardi Suede
JDM ITR motor w/ matching tranny (60k miles on the motor setup and was purchased through HMO by previous owner)
Stock JDM ITR p73 ECU
Comes equiped with the JDM parking sticker, and random jdm written stuff that I can't read, etc..
Price: 13k or 14k w/ the mf8s
If you are interested, send me a pm and we can discuss it some more - I DO NOT want trades.
96,000 km aka 60kish miles
Some of the mods/stock options on the car:
Tein Flex
Original 4x114.3 setup with Blitz Wheels
Project Mu front brake rotors
OEM Wing
OEM lip
DC header
Apexi N1 exhaust
Skunk2 camber kit
ITR front strut bar
Rear strut bar
USDM shift ****
J's racing front scoop
Non hid jdm front
USDM ITR front seats
Jdm itr rear seats
Mugen Steering wheel or Nardi Suede
JDM ITR motor w/ matching tranny (60k miles on the motor setup and was purchased through HMO by previous owner)
Stock JDM ITR p73 ECU
Comes equiped with the JDM parking sticker, and random jdm written stuff that I can't read, etc..
Price: 13k or 14k w/ the mf8s
If you are interested, send me a pm and we can discuss it some more - I DO NOT want trades.
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2003
Location: San Francisco, CA, USA
Posts: 2,377
Likes: 0
Received 0 Likes
on
0 Posts
2001 Acura Integra Type R
2001 Nighthawk Black Pearl ITR
Second Owner
33K Miles with a Clean Title
2 Liter BUILT engine ERL 84MM Sleeves, Carillo Rods, 12.5:1 Arias Pistons, OEM ITR Water and oil pump, Comptech Flywheel, ACT clutch. AEBS head studs, TODA timing belt, everything is Blueprinted, balanced, microposlished, OEM bearings, R&D Dyno CNC Port Race Head. hand finishing at the valve seats. Skunk Stage 2 cams. AEM cam gears, Super Tech valves, valve springs and retainers. 5 angle valve job, port matched manifold and TB, RPM service 70mm T/B, RC Injectors, Hasport Billit Mounts, Hondata S100 inside of a Hondata ECU with the built in jumper so no sloppy harness.
Red JDM Recaros
Buddy Club Racing Spec Suspension
T1R 2.5 Exhaust
Comptech Race Header
Comptech Airbox Intake
Fluidyne Radiator with FAL Fans
OEM Front and REAR ITR Strut Bars
HID Kit
OEM Gunmetal rims with 205/50/15 falken azenis tires
Lojack
Shaved Antenna
4 Door Rear Door Handles Installed (No Keyhole)
Asking $18,000 or trades for a Black on Black 335i 6spd coupe plus cash, Black on Black 04+ Acura TL , Black on Black AP2 S2000 with Hardtop, or Black Mercedes E320/E350. If You have something else that I might be interested, let me know. No Integras, Civics, 240s, etc. and nothing heavily modified. Parts can be taken off to reduce the price.
Second Owner
33K Miles with a Clean Title
2 Liter BUILT engine ERL 84MM Sleeves, Carillo Rods, 12.5:1 Arias Pistons, OEM ITR Water and oil pump, Comptech Flywheel, ACT clutch. AEBS head studs, TODA timing belt, everything is Blueprinted, balanced, microposlished, OEM bearings, R&D Dyno CNC Port Race Head. hand finishing at the valve seats. Skunk Stage 2 cams. AEM cam gears, Super Tech valves, valve springs and retainers. 5 angle valve job, port matched manifold and TB, RPM service 70mm T/B, RC Injectors, Hasport Billit Mounts, Hondata S100 inside of a Hondata ECU with the built in jumper so no sloppy harness.
Red JDM Recaros
Buddy Club Racing Spec Suspension
T1R 2.5 Exhaust
Comptech Race Header
Comptech Airbox Intake
Fluidyne Radiator with FAL Fans
OEM Front and REAR ITR Strut Bars
HID Kit
OEM Gunmetal rims with 205/50/15 falken azenis tires
Lojack
Shaved Antenna
4 Door Rear Door Handles Installed (No Keyhole)
Asking $18,000 or trades for a Black on Black 335i 6spd coupe plus cash, Black on Black 04+ Acura TL , Black on Black AP2 S2000 with Hardtop, or Black Mercedes E320/E350. If You have something else that I might be interested, let me know. No Integras, Civics, 240s, etc. and nothing heavily modified. Parts can be taken off to reduce the price.
#11
Re: 2001 Acura Integra Type R
2001 Nighthawk Black Pearl ITR
Second Owner
33K Miles with a Clean Title
2 Liter BUILT engine ERL 84MM Sleeves, Carillo Rods, 12.5:1 Arias Pistons, OEM ITR Water and oil pump, Comptech Flywheel, ACT clutch. AEBS head studs, TODA timing belt, everything is Blueprinted, balanced, microposlished, OEM bearings, R&D Dyno CNC Port Race Head. hand finishing at the valve seats. Skunk Stage 2 cams. AEM cam gears, Super Tech valves, valve springs and retainers. 5 angle valve job, port matched manifold and TB, RPM service 70mm T/B, RC Injectors, Hasport Billit Mounts, Hondata S100 inside of a Hondata ECU with the built in jumper so no sloppy harness.
Red JDM Recaros
Buddy Club Racing Spec Suspension
T1R 2.5 Exhaust
Comptech Race Header
Comptech Airbox Intake
Fluidyne Radiator with FAL Fans
OEM Front and REAR ITR Strut Bars
HID Kit
OEM Gunmetal rims with 205/50/15 falken azenis tires
Lojack
Shaved Antenna
4 Door Rear Door Handles Installed (No Keyhole)
Asking $18,000 or trades for a Black on Black 335i 6spd coupe plus cash, Black on Black 04+ Acura TL , Black on Black AP2 S2000 with Hardtop, or Black Mercedes E320/E350. If You have something else that I might be interested, let me know. No Integras, Civics, 240s, etc. and nothing heavily modified. Parts can be taken off to reduce the price.
Second Owner
33K Miles with a Clean Title
2 Liter BUILT engine ERL 84MM Sleeves, Carillo Rods, 12.5:1 Arias Pistons, OEM ITR Water and oil pump, Comptech Flywheel, ACT clutch. AEBS head studs, TODA timing belt, everything is Blueprinted, balanced, microposlished, OEM bearings, R&D Dyno CNC Port Race Head. hand finishing at the valve seats. Skunk Stage 2 cams. AEM cam gears, Super Tech valves, valve springs and retainers. 5 angle valve job, port matched manifold and TB, RPM service 70mm T/B, RC Injectors, Hasport Billit Mounts, Hondata S100 inside of a Hondata ECU with the built in jumper so no sloppy harness.
Red JDM Recaros
Buddy Club Racing Spec Suspension
T1R 2.5 Exhaust
Comptech Race Header
Comptech Airbox Intake
Fluidyne Radiator with FAL Fans
OEM Front and REAR ITR Strut Bars
HID Kit
OEM Gunmetal rims with 205/50/15 falken azenis tires
Lojack
Shaved Antenna
4 Door Rear Door Handles Installed (No Keyhole)
Asking $18,000 or trades for a Black on Black 335i 6spd coupe plus cash, Black on Black 04+ Acura TL , Black on Black AP2 S2000 with Hardtop, or Black Mercedes E320/E350. If You have something else that I might be interested, let me know. No Integras, Civics, 240s, etc. and nothing heavily modified. Parts can be taken off to reduce the price.
#13
Accident Prone
Join Date: May 2010
Location: The runoff of a track near you.
Posts: 2,418
Likes: 0
Received 1 Like
on
1 Post
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
very nice ^
i just had one of those things, you know, a picture in your brain: what if someone took a real deal JDM ITR and converted the front to USDM?
i just had one of those things, you know, a picture in your brain: what if someone took a real deal JDM ITR and converted the front to USDM?
#16
Honda-Tech Member
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
really wanna buy a itr shell
really want a black one...
hit me up text or pm me 425 343 4408
just about any condition ok with me unless recked
also have a black on black
2001 330ci 105k miles
needs a few minor things
partial trades for shell plus cash
just hit me up
really want a black one...
hit me up text or pm me 425 343 4408
just about any condition ok with me unless recked
also have a black on black
2001 330ci 105k miles
needs a few minor things
partial trades for shell plus cash
just hit me up
Last edited by c5stunna; 09-10-2010 at 02:19 PM.
#17
Honda-Tech Member
Join Date: Aug 2004
Location: BFE TX
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
FRONT BUMPER IS NOT BOLTED ON ALL THE WAY IN THESE PICS
Thanks to txhatch for the pics!
Up for sale is my NHBP 01 ITR #018 it has 69k original miles. Im the 2nd owner i bought the car 2 years ago from a good friend. The car does have a clean blue title. The inside is super clean minus the driver floor mat is pretty haggard, the outside is pretty clean few dents and dings here and there but overall its not bad. The motor is sleeved 2.0 with sc61 and built head. Car made 390whp on 15lbs a while back! Built motor has about 7000 miles on it.
Price ill say $16,000 just because i have to put one!
trades im looking for s2000,rsx,tsx just let me know what you have im not picky!
Inside:
F1 spec carbon kevlar buckets black
OEM radio
OEM 6 disc cd changer in trunk
Outside:
stock
Motor:
original b18c5
sleeved 2.0
JE pistons
Manly rods
supertech valves, valve springs, and retainers
OEM itr cams
Drag manifold
Precision 1000cc injectors
sc61 turbo
tial wastegate
tial BOV
precision medium fmic
honata s200
Greddy power extreme2 exhaust
OEM ITR tranny w/LSD
Competition stage 5 clutch(Brand new)
suspenion:
TEIN Flex(3000 miles)
Wheels:
16 WORK RSZ-R's gunmetal w/polished lip
Goodyear Eagle F1's 205/45
Heres a link to the only pics i have right now will be taking some new pics soon..
https://honda-tech.com/forums/honda-acura-28/lazerface-garage-rhd-itr-turbo-itr-2573611/
The Bad:
No A/C, no back seats, one wheel is curbed but not bent and very fixable, the car was broken into outside my house and my ecu/hondata was stolen however i have 2 ecu's one with s100 and one with s200, you can choose between those if you like but the car will come untuned!!!!
Im trying to be as honest as possible about selling this car and everything in this thread, im sure im forgetting several things but i will update as i can!
#18
Honda-Tech Member
Join Date: Mar 2010
Location: New Jersey
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
FS: 2001 Acura Integra Type R NHBP
Clean Title
95,XXX Original miles
Basically stock vehicle
Adult owned driven
All scheduled maintenance – properly maintained
Multiple secirity features installed. Will disclose to buyer
JDM 16" ITR wheels
15" stock wheels
OEM foglights
JDM SRS ITR steering wheel
Findanza Lightweight flywheel
Carfax report available upon request
Incredible car: I will be sad to see it go, but I was recently laid off and need to get rid of it. I'm not in a huge rush to sell it since I still have some money to hold me over for awhile. Would like to sell to a fellow Honda enthusiast to make sure it’s well taken care of for the rest of its life. Asking $13K or OBO, serious inquiries only (reasonable offers will be entertained - no trades). Email (rsx202002@yahoo.com) or PM me if you have any questions about the car.
Pics:https://honda-tech.com/forums/acura-integra-type-r-8/introducing-01-0193-a-2786148/
Clean Title
95,XXX Original miles
Basically stock vehicle
Adult owned driven
All scheduled maintenance – properly maintained
Multiple secirity features installed. Will disclose to buyer
JDM 16" ITR wheels
15" stock wheels
OEM foglights
JDM SRS ITR steering wheel
Findanza Lightweight flywheel
Carfax report available upon request
Incredible car: I will be sad to see it go, but I was recently laid off and need to get rid of it. I'm not in a huge rush to sell it since I still have some money to hold me over for awhile. Would like to sell to a fellow Honda enthusiast to make sure it’s well taken care of for the rest of its life. Asking $13K or OBO, serious inquiries only (reasonable offers will be entertained - no trades). Email (rsx202002@yahoo.com) or PM me if you have any questions about the car.
Pics:https://honda-tech.com/forums/acura-integra-type-r-8/introducing-01-0193-a-2786148/
#19
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
CAR IS SOLD, SOLD, SOLD...2001 PY ITR FOR SALE AND OR PART OUT..............
(FLORIDA REBUILT SALVAGE TITLE)
ENITIRE CAR AS SEEN IN THE PICS BELOW $7500
FULL SWAP $2800
INCLUDES: 99 GSR LONGBLOCK, 97 JDM TYPE R TRANNY,SKUNK2 I.M.,HYTECH BIG TUBE REP.,ACT CLUTCH 6 PUCK SPRUNG, AVID MOUNT KIT ETC.... ALL PAPER IN HAND
RED RECARO SRD'S $800
NON SRS JDM STEERING WHEEL $150
JDM 96 SPEC CLUSTER $150
16" BUDDY CLUB P1 WHEELS W/ FALKEN AZENIS $800
SHELL AS SEEN W/ WHEELS AND CLUSTER $4500
OR AS LISTED ABOVE ENTIRE CAR W EVERYTHING FOR $7500
CALL OR TEXT 347-251-7184
(FLORIDA REBUILT SALVAGE TITLE)
ENITIRE CAR AS SEEN IN THE PICS BELOW $7500
FULL SWAP $2800
INCLUDES: 99 GSR LONGBLOCK, 97 JDM TYPE R TRANNY,SKUNK2 I.M.,HYTECH BIG TUBE REP.,ACT CLUTCH 6 PUCK SPRUNG, AVID MOUNT KIT ETC.... ALL PAPER IN HAND
RED RECARO SRD'S $800
NON SRS JDM STEERING WHEEL $150
JDM 96 SPEC CLUSTER $150
16" BUDDY CLUB P1 WHEELS W/ FALKEN AZENIS $800
SHELL AS SEEN W/ WHEELS AND CLUSTER $4500
OR AS LISTED ABOVE ENTIRE CAR W EVERYTHING FOR $7500
CALL OR TEXT 347-251-7184
Last edited by chucky1213; 10-29-2010 at 07:28 AM. Reason: car is sold...
#22
Honda-Tech Member
Join Date: Sep 2009
Location: Wilmington, DE
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
#23
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
[QUOTE=chucky1213;43529014]2001 PY ITR FOR SALE AND OR PART OUT..............
(FLORIDA REBUILT SALVAGE TITLE)
ENITIRE CAR AS SEEN IN THE PICS BELOW $7500
This is very tempting I wish I wasn't moving glws
(FLORIDA REBUILT SALVAGE TITLE)
ENITIRE CAR AS SEEN IN THE PICS BELOW $7500
This is very tempting I wish I wasn't moving glws
#24
Honda-Tech Member
Join Date: Sep 2003
Location: sacramento, ca, usa
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cars For Sale: Integra TYPE-R's - September/October 2010
1998 CW
---1998 Integra Type-R Cw---
GS-R Swap complete stock
stock wheels
NO Kit/CPR/Taillights/seats all replace with stock
-----$8000 obo-----
Built b18b1/CTR head
RS Sleeved 2.0
11.1 CP
Eagle Rods
Arp stud
PF 3 angle
pF valves and valve train
ctr cams
blox 70mm
4.4 final drive
lsd
as is with kit/wheels/taillights/recaro/spoon steering wheel/msd/etc.
12500
---2000 Integra Type-R PY Shell---
Fresh Paint
jdm front
5 lug suspension
k20 swap
missing wing/ door panels/ here and there
unfinished porject
-----$8500 obo with k20-----
---2001 Integra Type-R NHB Shell---
fresh body work done
jdm front
5 lug
missing seats/ door panels/ motor
-----$3500 obo-----
---1998 Integra Type-R Cw Shell---
clean title, needs body work, can have it done
missing front end/ doors/ rear bumper/ seats/ cluster/ suspension
-----$pending till 9/23/10 -----
---1998 Integra Type-R Cw---
GS-R Swap complete stock
stock wheels
NO Kit/CPR/Taillights/seats all replace with stock
-----$8000 obo-----
Built b18b1/CTR head
RS Sleeved 2.0
11.1 CP
Eagle Rods
Arp stud
PF 3 angle
pF valves and valve train
ctr cams
blox 70mm
4.4 final drive
lsd
as is with kit/wheels/taillights/recaro/spoon steering wheel/msd/etc.
12500
---2000 Integra Type-R PY Shell---
Fresh Paint
jdm front
5 lug suspension
k20 swap
missing wing/ door panels/ here and there
unfinished porject
-----$8500 obo with k20-----
---2001 Integra Type-R NHB Shell---
fresh body work done
jdm front
5 lug
missing seats/ door panels/ motor
-----$3500 obo-----
---1998 Integra Type-R Cw Shell---
clean title, needs body work, can have it done
missing front end/ doors/ rear bumper/ seats/ cluster/ suspension
-----$pending till 9/23/10 -----
Last edited by turbocharge916r; 09-16-2010 at 12:07 AM.