1990 Integra b18 crank but no start
#1
1990 Integra b18 crank but no start
I have a 1990 b18 integra rs sedan that was running perfectly fine and then just died. Will not fire back up again. Have checked every ground, solid. Have checked every injector for power and flow, and checked the fuel pump and filter for clogs, power and flow, all good there. Distributor gets power, rotor and icm function properly. When the cap is off, the rotor spins and the ignitor fires solid, but when i put the brand new cap on it doesn't send power to the leads so the brand new wires and brand new plugs (properly gapped) arnt getting spark. I have checked the main relay and all solder points look okay and the relay clicks when key turned to on position, as well as no arcing of any solder points. Also looked at the ecu for any flashing lights and nothing, no check engine light, I even removed the ecu fuse for 10 minutes to reset it and no progress. I literally have no idea what to check next. Any help would be greatly appreciated.
Last edited by Joe Sauls; 02-17-2018 at 01:55 AM. Reason: Added more things I've checked
Thread
Thread Starter
Forum
Replies
Last Post
james myers
Engine Management and Tuning
5
01-19-2017 12:08 PM