Blown Integra! Looking for options
#1
Blown Integra! Looking for options
Hey everyone, I have a 1998 Acura integra GSR recently I was driving and heard some knock, I parked the car and had it towed to my storage building. I ended up spinning a bearing and it is knocking pretty badly. What are my options I would like to keep the original block in the car and my end goal is around 400 whp what can I do that is afforadable but yet reliable what will I need and what is the best to use. And where to get the parts. Thanks everyone! Looking forward to discussing options!
#2
Honda-Tech Member
Join Date: Mar 2017
Location: Atlanta, GA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Re: Blown Integra! Looking for options
Only thing that'll get you to 400hp in a teg is boost. b20 block in the car would be better b/c of the displacement increase, but you want to keep the original block, so.....
bore it to 84mm, sleeve that bitch, get an LS head & boost the **** out of it. that's your only chance at 400hp
This guy's making 300+hp on a HEALTHY GS-R motor. with a mild turbo. Might want to glance at his thread. https://honda-tech.com/forums/forced...hread-3297958/
bore it to 84mm, sleeve that bitch, get an LS head & boost the **** out of it. that's your only chance at 400hp
This guy's making 300+hp on a HEALTHY GS-R motor. with a mild turbo. Might want to glance at his thread. https://honda-tech.com/forums/forced...hread-3297958/
Thread
Thread Starter
Forum
Replies
Last Post