hankys build
#1
Honda-Tech Member
Thread Starter
hankys build
starting this build thread for my friend hanky. hopefully hell pick up.
car is a 07 civic si
flashpro v2
kraftwerks c30 kit
zdx throttle body/w some kind of adapter
grams 1000s
skunk2 alpha header
skunk2 megapower r exhaust
clutchmasters fx350 kit
progress spring/ tokico blues
[URL=http://s1055.photobucket.com/user/lsjoker/media/IMG_20140808_213253001_zpswwoqljrg.jpg.html][/]
today were gona be swapping out the skunk2 megapower r exhaust for an xlr8 76mm exhaust.
also doing blueprint stage 2 cams with supetech valve springs/ titanium retainers. tried to get him to reuse his steel retainers but...... meh
i plan to do a before and after wot video on the exhaust change, depending on how off the afr are.
car is a 07 civic si
flashpro v2
kraftwerks c30 kit
zdx throttle body/w some kind of adapter
grams 1000s
skunk2 alpha header
skunk2 megapower r exhaust
clutchmasters fx350 kit
progress spring/ tokico blues
[URL=http://s1055.photobucket.com/user/lsjoker/media/IMG_20140808_213253001_zpswwoqljrg.jpg.html][/]
today were gona be swapping out the skunk2 megapower r exhaust for an xlr8 76mm exhaust.
also doing blueprint stage 2 cams with supetech valve springs/ titanium retainers. tried to get him to reuse his steel retainers but...... meh
i plan to do a before and after wot video on the exhaust change, depending on how off the afr are.
Last edited by ls joker; 02-14-2016 at 06:03 AM.
#4
Honda-Tech Member
Thread Starter
Re: hankys build
alrite so we picked up his rims. they are rota grids, the concave model. got the exhaust on, difference in tone film, and a special gift lol. driven by yours truly. just waiting on the videos to upload. i dont have any video editing manager, i tried to have both video upload as one for a better comparison. but i suck so whatever.
Last edited by ls joker; 02-06-2016 at 04:41 PM.
#5
Honda-Tech Member
Thread Starter
Re: hankys build
rota grids 17x9 +/- 25, 5x114.3, cant remember( for sale $600) dont like the fitment and dont really want to roll the fenders.
everything went smoothly with the cams, rockers, and tensioner. had to remove the upper timing side torque mount and the serpentine belt just to see the timing marks on the pulley
http://i1055.photobucket.com/albums/s510/lsjoker/20160213_151549_zpssw4cqc3n.jpg[/IMG]
smoothly enough until one of the bolt to the euro xport tool bent. so were done until we get another bolt machined.
all the goodies
everything went smoothly with the cams, rockers, and tensioner. had to remove the upper timing side torque mount and the serpentine belt just to see the timing marks on the pulley
http://i1055.photobucket.com/albums/s510/lsjoker/20160213_151549_zpssw4cqc3n.jpg[/IMG]
smoothly enough until one of the bolt to the euro xport tool bent. so were done until we get another bolt machined.
all the goodies
#6
Honda-Tech Member
Thread Starter
Re: hankys build
so we got eight of the valves done. then the retainer cup on the euro xport tool bends, then breaks in two. but we did get the pulser plates and gears switched over to the new cams. ow just waiting on the new tool or whatever to come in. the ghey oem valve spring compressor from autozone was useless. sounds like the valve cover is bout to get power coat. and rims are in process of being resold lol
Trending Topics
#10
Honda-Tech Member
Thread Starter
Re: hankys build
that stuff is ever lasting. it sat overnight, then the next day it kinda ran everywhere , but whatever you touch was just ****** gooie. like when you smash a massive bug.
#11
Honda-Tech Member
Thread Starter
Re: hankys build
still in progess.
we started it and got a cam position cel. now after tryin to re align all the marks, tensioner doesnt want to go in cause the guide is pressing back against the tensioner. guide loosens up when the crank isnt at tdc, and the tensioner drops right it. man fucken chains have no give what so ever.
we started it and got a cam position cel. now after tryin to re align all the marks, tensioner doesnt want to go in cause the guide is pressing back against the tensioner. guide loosens up when the crank isnt at tdc, and the tensioner drops right it. man fucken chains have no give what so ever.
#12
Re: hankys build
You have the tensioner all the way depressed and locked? It should go straight in . You need to have all the chain slack on the intake side of the motor that way the guide has room to move....
#13
Honda-Tech Member
Thread Starter
Re: hankys build
we didnt have this problem last time apparently cause the pulsar plares werent 100 percent lined up. but the cam gear marks did line up
#14
Honda-Tech Member
Thread Starter
Re: hankys build
its Alive!. got the valve cover powder coated, so we had to remove the baffle to clean out the sand. instead of riveting it back in we used 5x12mm pan head screws, then tack welded them to the baffling.and painted the intake.
pics and vids up tomorrow. trying to put a few miles on it, but the weather is back to **** again
pics and vids up tomorrow. trying to put a few miles on it, but the weather is back to **** again
#15
Honda-Tech Member
Thread Starter
#17
Honda-Tech Member
Thread Starter
Re: hankys build
whaaaaattt? lol
we just need to button up those leaks. need to get it tuned im ready to feel the top end difference. on his car, you can monster low end, and monster midrange, top end starts to bleed off bout 7800.
truthfully, i miss the skunk2 exhaust. watch the dyno video a second ago, **** was crazy loud lol. the xlr8 has an nice exotic tone though.
we just need to button up those leaks. need to get it tuned im ready to feel the top end difference. on his car, you can monster low end, and monster midrange, top end starts to bleed off bout 7800.
truthfully, i miss the skunk2 exhaust. watch the dyno video a second ago, **** was crazy loud lol. the xlr8 has an nice exotic tone though.
Thread
Thread Starter
Forum
Replies
Last Post
danedoremus
For Sale
15
10-22-2011 06:46 AM